component
ISO7742FDWR
Public Made by Adomby adom
Texas Instruments Digital Isolators, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISO7742FDWR
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7742FDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Side-1 (input-side) power supply; the recommended supply range is 2.25 V to 5.5 V, and a 0.1 µF decoupling capacitor should be placed as close to this pin as possible. |
| 2 | GND1 | power_in | Ground connection for VCC1, the side-1 supply. |
| 3 | INA | input | Logic input for channel A on side 1; it is referenced to VCCI, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 4 | INB | input | Logic input for channel B on side 1; it is referenced to VCCI, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 5 | OUTC | output | Output for channel C on side 1, which is a reverse channel driven from side 2; the output goes high impedance when EN1 is low, and for the F-suffix device it defaults low when its input is open or unpowered. |
| 6 | OUTD | output | Output for channel D on side 1, which is a reverse channel driven from side 2; the output goes high impedance when EN1 is low, and for the F-suffix device it defaults low when its input is open or unpowered. |
| 7 | EN1 | input | Output enable 1: when EN1 is high or open, the side-1 outputs (OUTC and OUTD) are enabled, and when EN1 is low they are high impedance. |
| 8 | GND1 | power_in | Ground connection for VCC1, the side-1 supply. |
| 9 | GND2 | power_in | Ground connection for VCC2, the side-2 supply. |
| 10 | EN2 | input | Output enable 2: when EN2 is high or open, the side-2 outputs (OUTA and OUTB) are enabled, and when EN2 is low they are high impedance. |
| 11 | IND | input | Logic input for channel D on side 2; it is referenced to VCCI, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 12 | INC | input | Logic input for channel C on side 2; it is referenced to VCCI, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 13 | OUTB | output | Output for forward channel B on side 2; the output goes high impedance when EN2 is low, and for the F-suffix device it defaults low when its input is open or unpowered. |
| 14 | OUTA | output | Output for forward channel A on side 2; the output goes high impedance when EN2 is low, and for the F-suffix device it defaults low when its input is open or unpowered. |
| 15 | GND2 | power_in | Ground connection for VCC2, the side-2 supply. |
| 16 | VCC2 | power_in | Side-2 (output-side) power supply; the recommended supply range is 2.25 V to 5.5 V, and a 0.1 µF decoupling capacitor should be placed as close to this pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ISO7742FDWR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7742fdwr-etched.step/iso7742fdwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7742fdwr.step/iso7742fdwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
d6ac6b90609c88c4, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).