3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISO7741EDWRQ1
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7741EDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1; recommended supply range is 2.25 V to 5.5 V, with absolute maximum 6 V. |
| 2 | GND1 | power_in | Ground connection for VCC1. |
| 3 | INA | input | Input, channel A; logic high requires at least 0.7 × VCCI and logic low at most 0.3 × VCCI. |
| 4 | INB | input | Input, channel B; logic high requires at least 0.7 × VCCI and logic low at most 0.3 × VCCI. |
| 5 | INC | input | Input, channel C; logic high requires at least 0.7 × VCCI and logic low at most 0.3 × VCCI. |
| 6 | OUTD | output | Output, channel D; rated IOH of -4 mA, -2 mA or -1 mA and IOL of 4 mA, 2 mA or 1 mA at VCCO of 5 V, 3.3 V or 2.5 V respectively. |
| 7 | EN1 | input | Output enable 1; side 1 outputs are enabled when EN1 is high or open and placed in high impedance when EN1 is low. |
| 8 | GND1 | power_in | Ground connection for VCC1. |
| 9 | GND2 | power_in | Ground connection for VCC2. |
| 10 | EN2 | input | Output enable 2; side 2 outputs are enabled when EN2 is high or open and placed in high impedance when EN2 is low. |
| 11 | IND | input | Input, channel D; logic high requires at least 0.7 × VCCI and logic low at most 0.3 × VCCI. |
| 12 | OUTC | output | Output, channel C; rated IOH of -4 mA, -2 mA or -1 mA and IOL of 4 mA, 2 mA or 1 mA at VCCO of 5 V, 3.3 V or 2.5 V respectively. |
| 13 | OUTB | output | Output, channel B; rated IOH of -4 mA, -2 mA or -1 mA and IOL of 4 mA, 2 mA or 1 mA at VCCO of 5 V, 3.3 V or 2.5 V respectively. |
| 14 | OUTA | output | Output, channel A; rated IOH of -4 mA, -2 mA or -1 mA and IOL of 4 mA, 2 mA or 1 mA at VCCO of 5 V, 3.3 V or 2.5 V respectively. |
| 15 | GND2 | power_in | Ground connection for VCC2. |
| 16 | VCC2 | power_in | Power supply for side 2; recommended supply range is 2.25 V to 5.5 V, with absolute maximum 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | 5 | ||
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | 2 | 2.25 | V | 5 | ||
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | 1.7 | 1.8 | V | 5 | ||
| Supply voltage UVLO hysteresis | VHYS(UVLO) | 100 | 200 | mV | 5 | ||
| High-level output current | IOH | -4 | mA | VCCO = 5 V | 5 | ||
| Low-level output current | IOL | 4 | mA | VCCO = 5 V | 5 | ||
| Low-level input voltage | VIL | 0 | V | 5 | |||
| Data rate | DR | 0 | 100 | Mbps | 5 | ||
| Ambient temperature | TA | -40 | 25 | 150 | °C | 5 | |
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | 5 | ||
| Voltage at INx, OUTx, ENx | V | -0.5 | V | 5 | |||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Junction temperature | TJ | 175 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Low-level output voltage (5-V supply) | VOL | 0.2 | 0.4 | V | IOL = 4 mA; see Figure 6-1 | 9 | |
| High-level input current | IIH | 10 | μA | VIH = VCCI at INx or ENx | 9 | ||
| Low-level input current | IIL | -10 | μA | VIL = 0 V at INx or ENx | 9 | ||
| Common-mode transient immunity | CMTI | 85 | 100 | kV/μs | VI = VCCI or 0 V, VCM = 1200 V; see Figure 6-4 | 9 | |
| Supply current - Disable, side 1 | ICC1 | 1 | 1.7 | mA | EN1 = EN2 = 0 V; VI = VCCI (ISO7741E-Q1) | 9 | |
| Supply current - Disable, side 2 | ICC2 | 0.7 | 1.3 | mA | EN1 = EN2 = 0 V; VI = VCCI (ISO7741E-Q1) | 9 | |
| Supply current - DC signal, side 1 | ICC1 | 1.5 | 2.4 | mA | EN1 = EN2 = VCCI; VI = VCCI (ISO7741E-Q1) | 9 | |
| Supply current - DC signal, side 2 | ICC2 | 2 | 3.5 | mA | EN1 = EN2 = VCCI; VI = VCCI (ISO7741E-Q1) | 9 | |
| Supply current - AC signal, 1 Mbps, side 1 | ICC1 | 3.2 | 5 | mA | All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 9 | |
| Supply current - AC signal, 1 Mbps, side 2 | ICC2 | 2.8 | 4.4 | mA | All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 9 | |
| Supply current - AC signal, 10 Mbps, side 1 | ICC1 | 3.7 | 5.2 | mA | All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 9 | |
| Supply current - AC signal, 10 Mbps, side 2 | ICC2 | 4.2 | 6.2 | mA | All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 9 | |
| Supply current - AC signal, 100 Mbps, side 1 | ICC1 | 8.6 | 11.3 | mA | All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 9 | |
| Supply current - AC signal, 100 Mbps, side 2 | ICC2 | 18 | 22 | mA | All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 9 | |
| Propagation delay time (5-V supply) | tPLH, tPHL | 6 | 10.7 | 16.5 | ns | See Figure 6-1 | 12 |
| Pulse width distortion (5-V supply) | PWD | 0 | 4.9 | ns | /tPHL, tPLH/ | 12 | |
| Channel-to-channel output skew time (5-V supply) | tsk(o) | 4 | ns | Same-direction channels | 12 | ||
| Part-to-part skew time (5-V supply) | tsk(pp) | 4.4 | ns | 12 | |||
| Output signal rise time (5-V supply) | tr | 2.4 | 4.1 | ns | See Figure 6-1 | 12 | |
| Output signal fall time (5-V supply) | tf | 2.4 | 4.1 | ns | See Figure 6-1 | 12 | |
| Disable propagation delay, high-to-high impedance output (5-V supply) | tPHZ | 9 | 20 | ns | See Figure 6-2 | 12 | |
| Disable propagation delay, low-to-high impedance output (5-V supply) | tPLZ | 9 | 20 | ns | See Figure 6-2 | 12 | |
| Enable propagation delay, high impedance-to-high output (ISO7741E-Q1, 5-V supply) | tPZH | 7 | 20 | ns | ISO7741E-Q1 (non-F); See Figure 6-2 | 12 | |
| Enable propagation delay, high impedance-to-low output (ISO7741E-Q1, 5-V supply) | tPZL | 3 | 8.5 | μs | ISO7741E-Q1 (non-F); See Figure 6-2 | 12 | |
| Default output delay time from input power loss (5-V supply) | tDO | 0.1 | 0.3 | μs | Measured from the time VCC goes below 1.7 V. See Figure 6-4 | 12 | |
| High-level output voltage (5-V supply) | VOH | 4.8 | V | IOH = -4 mA; see Figure 6-1 | 9 | ||
| Input capacitance (5-V supply) | CI | 2 | pF | VI = VCC/2 + 0.4×sin(2πft), f = 1 MHz, VCC = 5 V | 9 | ||
| Time interval error (5-V supply) | tie | 0.8 | ns | 16, 1 PRBS data at 100 Mbps | 12 | ||
| Junction-to-ambient thermal resistance | RθJA | 83.4 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 46 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 48 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ψJT | 19.1 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ψJB | 47.5 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
ISO7741EDWRQ1 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7741edwrq1-etched.step/iso7741edwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7741edwrq1.step/iso7741edwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
d9fcabadc6a70c1e, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).