Generated by kicad-footprint-generator · KiCad file format 20260206
ISO7740QDWRQ1
Texas Instruments · Digital Isolators · SOIC-16
ISO7740QDWRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1 (input side); recommended supply range is 2.25 V to 5.5 V. |
| 2 | GND1 | power_in | Ground connection for VCC1 on the input side. |
| 3 | INA | input | Input, channel A; logic input referenced to VCC1, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 4 | INB | input | Input, channel B; logic input referenced to VCC1, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 5 | INC | input | Input, channel C; logic input referenced to VCC1, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 6 | IND | input | Input, channel D; logic input referenced to VCC1, with VIH of at least 0.7 × VCCI and VIL of at most 0.3 × VCCI. |
| 7 | NC | unconnected | Not connected on the ISO7740-Q1. |
| 8 | GND1 | power_in | Ground connection for VCC1 on the input side. |
| 9 | GND2 | power_in | Ground connection for VCC2 on the output side. |
| 10 | EN2 | input | Output enable 2; output pins on side 2 are enabled when EN2 is high or open and are in high-impedance state when EN2 is low. |
| 11 | OUTD | output | Output, channel D on the output side. |
| 12 | OUTC | output | Output, channel C on the output side. |
| 13 | OUTB | output | Output, channel B on the output side. |
| 14 | OUTA | output | Output, channel A on the output side. |
| 15 | GND2 | power_in | Ground connection for VCC2 on the output side. |
| 16 | VCC2 | power_in | Power supply for side 2 (output side); recommended supply range is 2.25 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | 5 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Data rate | DR | 0 | 100 | Mbps | 5 | ||
| High-level output current | IOH | -4 | mA | VCCO = 5 V | 5 | ||
| High-level output current | IOH | -2 | mA | VCCO = 3.3 V | 5 | ||
| High-level output current | IOH | -1 | mA | VCCO = 2.5 V | 5 | ||
| Low-level output current | IOL | 4 | mA | VCCO = 5 V | 5 | ||
| Low-level output current | IOL | 2 | mA | VCCO = 3.3 V | 5 | ||
| Low-level output current | IOL | 1 | mA | VCCO = 2.5 V | 5 | ||
| Low-level input voltage | VIL | 0 | V | Maximum is 0.3 × VCCI | 5 | ||
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | Referenced to local ground | 5 | |
| Voltage at INx, OUTx, ENx | V | -0.5 | V | Maximum is VCCX + 0.5 V, must not exceed 6 V | 5 | ||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Electrostatic discharge, human-body model | V(ESD) | -6000 | 6000 | V | HBM per AEC Q100-002 | 5 | |
| Electrostatic discharge, charged-device model | V(ESD) | -1500 | 1500 | V | CDM per AEC Q100-011 | 5 | |
| Common-mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 5 V; VI = VCCI or 0 V, VCM = 1200 V; see Figure 18 | 9 | |
| Common-mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 3.3 V; VI = VCCI or 0 V, VCM = 1200 V; see Figure 18 | 11 | |
| Common-mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 2.5 V; VI = VCCI or 0 V, VCM = 1200 V; see Figure 18 | 13 | |
| High-level input current | IIH | 10 | μA | VIH = VCCI at INx or ENx | 9 | ||
| Low-level input current | IIL | -10 | μA | VIL = 0 V at INx or ENx | 9 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC1 = VCC2 = 5 V; IOL = 4 mA; see Figure 15 | 9 | |
| Low-level output voltage | VOL | 0.1 | 0.3 | V | VCC1 = VCC2 = 3.3 V; IOL = 2 mA; see Figure 15 | 11 | |
| Low-level output voltage | VOL | 0.05 | 0.2 | V | VCC1 = VCC2 = 2.5 V; IOL = 1 mA; see Figure 15 | 13 | |
| High-level output voltage | VOH | 4.8 | V | VCC1 = VCC2 = 5 V; IOH = -4 mA; see Figure 15; minimum is VCCO - 0.4 V | 9 | ||
| High-level output voltage | VOH | 3.2 | V | VCC1 = VCC2 = 3.3 V; IOH = -2 mA; see Figure 15; minimum is VCCO - 0.3 V | 11 | ||
| High-level output voltage | VOH | 2.45 | V | VCC1 = VCC2 = 2.5 V; IOH = -1 mA; see Figure 15; minimum is VCCO - 0.2 V | 13 | ||
| Input capacitance | CI | 2 | pF | VI = VCC/2 + 0.4×sin(2πft), f = 1 MHz, VCC = 5 V | 9 | ||
| Junction-to-ambient thermal resistance, DW (SOIC) 16-pin | RθJA | 83.4 | °C/W | DW (SOIC) 16-pin package | 6 | ||
| Junction-to-case (top) thermal resistance, DW (SOIC) 16-pin | RθJC(top) | 46 | °C/W | DW (SOIC) 16-pin package | 6 | ||
| Junction-to-board thermal resistance, DW (SOIC) 16-pin | RθJB | 48 | °C/W | DW (SOIC) 16-pin package | 6 | ||
| Junction-to-top characterization parameter, DW (SOIC) 16-pin | ψJT | 19.1 | °C/W | DW (SOIC) 16-pin package | 6 | ||
| Junction-to-board characterization parameter, DW (SOIC) 16-pin | ψJB | 47.5 | °C/W | DW (SOIC) 16-pin package | 6 | ||
| Maximum power dissipation | PD | 200 | mW | ISO7740-Q1; VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, 50-MHz 50% duty cycle square wave | 6 | ||
| Maximum power dissipation by side-1 | PD1 | 40 | mW | ISO7740-Q1; VCC1 = VCC2 = 5.5 V, TJ = 150°C | 6 | ||
| Maximum power dissipation by side-2 | PD2 | 160 | mW | ISO7740-Q1; VCC1 = VCC2 = 5.5 V, TJ = 150°C | 6 | ||
| Supply current, disable, side 1 | ICC1 | 1.2 | 1.6 | mA | VCC1 = VCC2 = 5 V; EN2 = 0 V; VI = VCC1 (ISO7740-Q1) | 10 | |
| Supply current, disable, side 2 | ICC2 | 0.3 | 0.5 | mA | VCC1 = VCC2 = 5 V; EN2 = 0 V; VI = VCC1 (ISO7740-Q1) | 10 | |
| Supply current, DC signal, side 1 | ICC1 | 1.2 | 1.6 | mA | VCC1 = VCC2 = 5 V; EN2 = VCC2; VI = VCC1 (ISO7740-Q1) | 10 | |
| Supply current, DC signal, side 2 | ICC2 | 2 | 3.2 | mA | VCC1 = VCC2 = 5 V; EN2 = VCC2; VI = VCC1 (ISO7740-Q1) | 10 | |
| Supply current, AC signal 1 Mbps, side 1 | ICC1 | 3.3 | 4.7 | mA | VCC1 = VCC2 = 5 V; all channels switching, square wave, CL = 15 pF, 1 Mbps | 10 | |
| Supply current, AC signal 1 Mbps, side 2 | ICC2 | 2.3 | 3.6 | mA | VCC1 = VCC2 = 5 V; all channels switching, square wave, CL = 15 pF, 1 Mbps | 10 | |
| Supply current, AC signal 10 Mbps, side 1 | ICC1 | 3.4 | 4.8 | mA | VCC1 = VCC2 = 5 V; all channels switching, square wave, CL = 15 pF, 10 Mbps | 10 | |
| Supply current, AC signal 10 Mbps, side 2 | ICC2 | 4.2 | 5.8 | mA | VCC1 = VCC2 = 5 V; all channels switching, square wave, CL = 15 pF, 10 Mbps | 10 | |
| Supply current, AC signal 100 Mbps, side 1 | ICC1 | 3.8 | 5.7 | mA | VCC1 = VCC2 = 5 V; all channels switching, square wave, CL = 15 pF, 100 Mbps | 10 | |
| Supply current, AC signal 100 Mbps, side 2 | ICC2 | 22.7 | 28 | mA | VCC1 = VCC2 = 5 V; all channels switching, square wave, CL = 15 pF, 100 Mbps | 10 | |
| Propagation delay time | tPLH, tPHL | 6 | 10.7 | 16 | ns | VCC1 = VCC2 = 5 V; see Figure 15 | 15 |
| Pulse width distortion | PWD | 0 | 4.9 | ns | VCC1 = VCC2 = 5 V; /tPHL - tPLH/ | 15 | |
| Channel-to-channel output skew time | tsk(o) | 4 | ns | VCC1 = VCC2 = 5 V; same-direction channels | 15 | ||
| Part-to-part skew time | tsk(pp) | 4.4 | ns | VCC1 = VCC2 = 5 V | 15 | ||
| Output signal rise time | tr | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V; see Figure 15 | 15 | |
| Output signal fall time | tf | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V; see Figure 15 | 15 | |
| Disable propagation delay, high-to-high impedance output | tPHZ | 9 | 20 | ns | VCC1 = VCC2 = 5 V; see Figure 16 | 15 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 9 | 20 | ns | VCC1 = VCC2 = 5 V; see Figure 16 | 15 | |
| Enable propagation delay, high impedance-to-high output | tPZH | 7 | 20 | ns | VCC1 = VCC2 = 5 V; ISO774x-Q1 (without F suffix) | 15 | |
| Enable propagation delay, high impedance-to-low output | tPZL | 3 | 8.5 | μs | VCC1 = VCC2 = 5 V; ISO774x-Q1 (without F suffix) | 15 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | μs | Measured from the time VCC goes below 1.7 V; see Figure 18 | 15 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | • Changed the method b1 Vini condition for apparent charge in the Insulation Specifications table ........................................ 7 | 2 |
CAD (KiCad official)
- Symbol:
ISO7740QDWRQ1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
iso7740qdwrq1-etched.step/iso7740qdwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7740qdwrq1.step/iso7740qdwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
12a8bdddd792a635, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).