main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs iso7740fqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iso7740fqdwrq1: viewers · Ray
iso7740fqdwrq1-etched.fit.json iso7740fqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso7740fqdwrq1-etched.glb iso7740fqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso7740fqdwrq1-etched.step iso7740fqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso7740fqdwrq1.glb Publish 0.1.0 · Ray
iso7740fqdwrq1.kicad_mod Publish 0.1.0 · Ray
iso7740fqdwrq1.kicad_sym Publish 0.1.0 · Ray
iso7740fqdwrq1.lbr Publish 0.1.0 · Ray
iso7740fqdwrq1.step Publish 0.1.0 · Ray
package.json iso7740fqdwrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json iso7740fqdwrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/iso7740fqdwrq1 · Ray

ISO7740FQDWRQ1

Texas Instruments · Digital Isolators · SOIC-16

ISO7740FQDWRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Supply voltage for input side, rated for 2.25V to 5.5V operation.
2 GND1 power_in Ground connection for input side (VCC1).
3 INA input Digital input for channel A, accepts CMOS logic signals from 0V to VCCI at data rates up to 100Mbps.
4 INB input Digital input for channel B, accepts CMOS logic signals from 0V to VCCI at data rates up to 100Mbps.
5 INC input Digital input for channel C, accepts CMOS logic signals from 0V to VCCI at data rates up to 100Mbps.
6 IND input Digital input for channel D, accepts CMOS logic signals from 0V to VCCI at data rates up to 100Mbps.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for input side (VCC1).
9 GND2 power_in Ground connection for output side (VCC2).
10 EN2 input Output enable for side 2; when high or open, output pins are enabled; when low, outputs are in high impedance state.
11 OUTD output Digital output for channel D, drives CMOS logic with typical propagation delay of 10.7ns at 5V and maximum data rate of 100Mbps.
12 OUTC output Digital output for channel C, drives CMOS logic with typical propagation delay of 10.7ns at 5V and maximum data rate of 100Mbps.
13 OUTB output Digital output for channel B, drives CMOS logic with typical propagation delay of 10.7ns at 5V and maximum data rate of 100Mbps.
14 OUTA output Digital output for channel A, drives CMOS logic with typical propagation delay of 10.7ns at 5V and maximum data rate of 100Mbps.
15 GND2 power_in Ground connection for output side (VCC2).
16 VCC2 power_in Supply voltage for output side, rated for 2.25V to 5.5V operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category Signal Isolation Devices
Pins 16

CAD (KiCad official)

  • Symbol: ISO7740FQDWRQ1
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: iso7740fqdwrq1-etched.step / iso7740fqdwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7740fqdwrq1.step / iso7740fqdwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (55 pp, sha256 3fc23e4a8eb8bc39, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF