Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISO7740DBQ

Texas Instruments · Pre-ordered Chips · SSOP-16-150mil

ISO7740DBQ from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Power supply for side 1; the absolute maximum supply voltage for VCC1 and VCC2 is 6 V, and the Features list a 2.25 V to 5.5 V supply range.
2 GND1 power_in Ground connection for VCC1 (side-1 ground).
3 INA input Logic input for channel A.
4 INB input Logic input for channel B.
5 INC input Logic input for channel C.
6 IND input Logic input for channel D.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for VCC1 (side-1 ground).
9 GND2 power_in Ground connection for VCC2 (side-2 ground).
10 EN2 input Output enable 2; side-2 outputs are enabled when EN2 is high or open and are high-impedance when EN2 is low.
11 OUTD output Output for channel D.
12 OUTC output Output for channel C.
13 OUTB output Output for channel B.
14 OUTA output Output for channel A.
15 GND2 power_in Ground connection for VCC2 (side-2 ground).
16 VCC2 power_in Power supply for side 2; the absolute maximum supply voltage for VCC1 and VCC2 is 6 V, and the Features list a 2.25 V to 5.5 V supply range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-150mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1, VCC2 VCC1, VCC2 -0.5 6 V 6
Voltage at INx, OUTx, ENx V -0.5 V 6
Output current IO -15 15 mA 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage VCC1, VCC2 VCC1, VCC2 2.25 5.5 V 7
UVLO threshold when supply voltage is rising VCC(UVLO+) 2 2.25 V 7
UVLO threshold when supply voltage is falling VCC(UVLO-) 1.7 1.8 V 7
Supply voltage UVLO hysteresis VHYS(UVLO) 100 200 mV 7
High level output current IOH -4 mA VCCO = 5 V 7
High level output current IOH -2 mA VCCO = 3.3 V 7
High level output current IOH -1 mA VCCO = 2.5 V 7
Low level output current IOL 4 mA VCCO = 5 V 7
Low level output current IOL 2 mA VCCO = 3.3 V 7
Low level output current IOL 1 mA VCCO = 2.5 V 7
Low level input voltage VIL 0 V 7
Data rate DR 50 Mbps 7
Ambient temperature TA -55 25 125 °C 7
High-level output voltage VOH 4.8 V IOH = -4 mA; See Figure 6-1 13
Low-level output voltage VOL 0.2 0.4 V IOL = 4 mA; See Figure 6-1 13
High-level input current at INx IIH 10 µA VIH = VCCI at INx 13
Low-level input current at INx IIL -10 µA VIL = 0 V at INx 13
High-level input current at ENx IIH 20 µA VIH = VCCI at ENx 13
Low-level input current at ENx IIL -20 µA VIL = 0 V at ENx 13
Common mode transient immunity CMTI 85 100 kV/μs VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-4 13
High-level output voltage VOH 3.2 V IOH = -2 mA; See Figure 6-1 15
Low-level output voltage VOL 0.1 0.3 V IOL = 2 mA; See Figure 6-1 15
High-level input current at INx IIH 10 µA VIH = VCCI at INx 15
Low-level input current at INx IIL -10 µA VIL = 0 V at INx 15
High-level input current at ENx IIH 30 µA VIH = VCCI at ENx 15
Low-level input current at ENx IIL -30 µA VIL = 0 V at ENx 15
Common mode transient immunity CMTI 85 100 kV/μs VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-4 15
High-level output voltage VOH 2.45 V IOH = -1 mA; See Figure 6-1 17
Low-level output voltage VOL 0.05 0.2 V IOL = 1 mA; See Figure 6-1 17
High-level input current at INx IIH 10 µA VIH = VCCI at INx 17
Low-level input current at INx IIL -10 µA VIL = 0 V at INx 17
High-level input current at ENx IIH 30 µA VIH = VCCI at ENx 17
Low-level input current at ENx IIL -30 µA VIL = 0 V at ENx 17
Common mode transient immunity CMTI 85 100 kV/μs VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-4 17
Supply current, disable (side 1) ICC1 1.2 2.3 mA EN2 = 0 V; VI = VCC1 (ISO7740) 14
Supply current, disable (side 2) ICC2 0.3 0.8 mA EN2 = 0 V; VI = VCC1 (ISO7740) 14
Supply current, disable (side 1) ICC1 5.5 7.8 mA EN2 = 0 V; VI = 0 V (ISO7740) 14
Supply current, DC signal (side 2) ICC2 2 3.6 mA EN2 = VCC2; VI = VCC1 (ISO7740) 14
Supply current, 100 Mbps AC signal (side 1) ICC1 3.8 6.6 mA 100 Mbps; all channels switching, square wave; CL = 15 pF 14
Supply current, 100 Mbps AC signal (side 2) ICC2 22.7 29.5 mA 100 Mbps; all channels switching, square wave; CL = 15 pF 14
Supply current, disable (side 1) ICC1 1.2 2.3 mA EN2 = 0 V; VI = VCC1 (ISO7740) 16
Supply current, disable (side 2) ICC2 0.3 0.7 mA EN2 = 0 V; VI = VCC1 (ISO7740) 16
Supply current, disable (side 1) ICC1 5.5 7.8 mA EN2 = 0 V; VI = 0 V (ISO7740) 16
Supply current, DC signal (side 2) ICC2 1.9 3.6 mA EN2 = VCC2; VI = VCC1 (ISO7740) 16
Supply current, 100 Mbps AC signal (side 1) ICC1 3.3 5.7 mA 100 Mbps; all channels switching, square wave; CL = 15 pF 16
Supply current, 100 Mbps AC signal (side 2) ICC2 17 22.3 mA 100 Mbps; all channels switching, square wave; CL = 15 pF 16
Supply current, disable (side 1) ICC1 1.2 2.2 mA EN2 = 0 V; VI = VCC1 (ISO7740) 18
Supply current, disable (side 2) ICC2 0.3 0.7 mA EN2 = 0 V; VI = VCC1 (ISO7740) 18
Supply current, disable (side 1) ICC1 5.5 7.8 mA EN2 = 0 V; VI = 0 V (ISO7740) 18
Supply current, DC signal (side 2) ICC2 1.9 3.6 mA EN2 = VCC2; VI = VCC1 (ISO7740) 18
Supply current, 100 Mbps AC signal (side 1) ICC1 3.2 5.5 mA 100 Mbps; all channels switching, square wave; CL = 15 pF 18
Supply current, 100 Mbps AC signal (side 2) ICC2 13 17.7 mA 100 Mbps; all channels switching, square wave; CL = 15 pF 18
Junction-to-ambient thermal resistance (DBQ-16) RθJA 109 °C/W 8
Junction-to-case (top) thermal resistance (DBQ-16) RθJC(top) 54.4 °C/W 8
Junction-to-board thermal resistance (DBQ-16) RθJB 51.9 °C/W 8

CAD (KiCad official)

  • Symbol: ISO7740DBQ
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: iso7740dbq-etched.step / iso7740dbq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7740dbq.step / iso7740dbq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 2ca99c9d6fcbe473, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF