main
Ray
Publish 0.1.0
751daf7
ISO7721FQDRQ1
Texas Instruments · Digital Isolators · SOIC-8
ISO7721FQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1 (input side), VCC1, with a recommended supply range of 2.25 V to 5.5 V and a 0.1-µF bypass capacitor to GND1. |
| 2 | OUTA | output | Output of channel A on the ISO7721-Q1 D package, which is on the side-1 ground reference and follows the input at INA in the opposite direction. |
| 3 | INB | input | Logic input for channel B, referenced to GND1, with CMOS/LVCMOS thresholds set by VCCI. |
| 4 | GND1 | power_in | Ground connection for VCC1 (side-1 ground). |
| 5 | GND2 | power_in | Ground connection for VCC2 (side-2 ground). |
| 6 | OUTB | output | Output of channel B, referenced to GND2 and driven from the isolated side-2 supply VCC2. |
| 7 | INA | input | Logic input for channel A on the ISO7721-Q1 D package, referenced to GND1. |
| 8 | VCC2 | power_in | Power supply for side 2 (output side), VCC2, with a recommended supply range of 2.25 V to 5.5 V and a 0.1-µF bypass capacitor to GND2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Signal Isolation Devices |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | Voltages relative to local ground (GND1 or GND2), peak | 6 | |
| Voltage at INx, OUTx | V | -0.5 | V | Max VCCX + 0.5, must not exceed 6 V | 6 | ||
| Output current | IO | -15 | 15 | mA | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | VCC1 and VCC2 can be set independently of one another | 7 | |
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | 2 | 2.25 | V | 7 | ||
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | 1.7 | 1.8 | V | 7 | ||
| Supply voltage UVLO hysteresis | VHYS(UVLO) | 100 | 200 | mV | 7 | ||
| High level output current | IOH | -4 | mA | VCCO = 5 V | 7 | ||
| High level output current | IOH | -2 | mA | VCCO = 3.3 V | 7 | ||
| High level output current | IOH | -1 | mA | VCCO = 2.5 V | 7 | ||
| Low level output current | IOL | 4 | mA | VCCO = 5 V | 7 | ||
| Low level output current | IOL | 2 | mA | VCCO = 3.3 V | 7 | ||
| Low level output current | IOL | 1 | mA | VCCO = 2.5 V | 7 | ||
| Low level input voltage | VIL | 0 | V | 7 | |||
| Data rate | DR | 0 | 100 | Mbps | 100 Mbps is the maximum specified data rate | 7 | |
| Ambient temperature | TA | -55 | 25 | 125 | °C | 7 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC1 = VCC2 = 5 V ± 10%; IOL = 4 mA; see Figure 7-1 | 13 | |
| High-level input current | IIH | 10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIH = VCCI at INx | 13 | ||
| Low-level input current | IIL | -10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIL = 0 V at INx | 13 | ||
| Common mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V; see Figure 7-3 | 13 | |
| Supply current - DC signal (F suffix, VI = 0 V) | ICC1, ICC2 | 1 | 2.2 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = 0 V (ISO7721-Q1 with F suffix) | 13 | |
| Supply current - DC signal (F suffix, VI = VCCI) | ICC1, ICC2 | 2.2 | 3.4 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI (ISO7721-Q1 with F suffix) | 13 | |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | 1.7 | 2.9 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 13 | |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | 2.2 | 3.5 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 13 | |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | 7.3 | 9.9 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 13 | |
| Low-level output voltage | VOL | 0.1 | 0.3 | V | VCC1 = VCC2 = 3.3 V ± 10%; IOL = 2mA; see Figure 7-1 | 14 | |
| Supply current - DC signal (F suffix, VI = 0 V) | ICC1, ICC2 | 1 | 2.1 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = 0 V (ISO7721-Q1 with F suffix) | 14 | |
| Supply current - DC signal (F suffix, VI = VCCI) | ICC1, ICC2 | 2.2 | 3.4 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCCI (ISO7721-Q1 with F suffix) | 14 | |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | 1.6 | 2.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 14 | |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | 2 | 3.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 14 | |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | 5.6 | 7.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 14 | |
| Low-level output voltage | VOL | 0.05 | 0.2 | V | VCC1 = VCC2 = 2.5 V ± 10%; IOL = 1mA; see Figure 7-1 | 15 | |
| Supply current - DC signal (F suffix, VI = 0 V) | ICC1, ICC2 | 1 | 2.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = 0 V (ISO7721-Q1 with F suffix) | 15 | |
| Supply current - DC signal (F suffix, VI = VCCI) | ICC1, ICC2 | 2.2 | 3.3 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCCI (ISO7721-Q1 with F suffix) | 15 | |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | 1.6 | 2.7 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 15 | |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | 1.9 | 3.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 15 | |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | 4.6 | 6.5 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 15 | |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 17 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 7-1 | 16 |
| Pulse width distortion | PWD | 0.5 | 5.9 | ns | VCC1 = VCC2 = 5 V ± 10% | 16 | |
| Channel-to-channel output skew time | tsk(o) | 4 | ns | VCC1 = VCC2 = 5 V ± 10%; same direction channels | 16 | ||
| Part-to-part skew time | tsk(pp) | 4.5 | ns | VCC1 = VCC2 = 5 V ± 10% | 16 | ||
| Output signal rise time | tr | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 7-1 | 16 | |
| Output signal fall time | tf | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 7-1 | 16 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | µs | VCC1 = VCC2 = 5 V ± 10%; measured from the time VCC goes below 1.7 V; see Figure 7-2 | 16 | |
| Time interval error | tie | 1 | ns | VCC1 = VCC2 = 5 V ± 10%; 16, 1 PRBS data at 100 Mbps | 16 | ||
| Propagation delay time | tPLH, tPHL | 6 | 11 | 18.5 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 7-1 | 16 |
| Channel-to-channel output skew time | tsk(o) | 4.4 | ns | VCC1 = VCC2 = 3.3 V ± 10%; same direction channels | 16 | ||
| Part-to-part skew time | tsk(pp) | 5 | ns | VCC1 = VCC2 = 3.3 V ± 10% | 16 | ||
| Output signal rise time | tr | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 7-1 | 16 | |
| Output signal fall time | tf | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 7-1 | 16 | |
| Propagation delay time | tPLH, tPHL | 7.5 | 12 | 21 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 7-1 | 17 |
| Channel-to-channel output skew time | tsk(o) | 4.4 | ns | VCC1 = VCC2 = 2.5 V ± 10%; same direction channels | 17 | ||
| Part-to-part skew time | tsk(pp) | 5.5 | ns | VCC1 = VCC2 = 2.5 V ± 10% | 17 | ||
| Output signal rise time | tr | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 7-1 | 17 | |
| Output signal fall time | tf | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 7-1 | 17 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | µs | VCC1 = VCC2 = 2.5 V ± 10%; measured from the time VCC goes below 1.7 V; see Figure 7-2 | 17 | |
| Junction-to-ambient thermal resistance (D, 8-pin SOIC) | RθJA | 137.7 | °C/W | D (8-pin SOIC) package | 8 |
CAD (KiCad official)
- Symbol:
ISO7721FQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
iso7721fqdrq1-etched.step/iso7721fqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7721fqdrq1.step/iso7721fqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
913f758cc5cc90d3, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISO7721FQDRQ1
**Texas Instruments** · Digital Isolators · SOIC-8
ISO7721FQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1 (input side), VCC1, with a recommended supply range of 2.25 V to 5.5 V and a 0.1-µF bypass capacitor to GND1. |
| 2 | OUTA | output | Output of channel A on the ISO7721-Q1 D package, which is on the side-1 ground reference and follows the input at INA in the opposite direction. |
| 3 | INB | input | Logic input for channel B, referenced to GND1, with CMOS/LVCMOS thresholds set by VCCI. |
| 4 | GND1 | power_in | Ground connection for VCC1 (side-1 ground). |
| 5 | GND2 | power_in | Ground connection for VCC2 (side-2 ground). |
| 6 | OUTB | output | Output of channel B, referenced to GND2 and driven from the isolated side-2 supply VCC2. |
| 7 | INA | input | Logic input for channel A on the ISO7721-Q1 D package, referenced to GND1. |
| 8 | VCC2 | power_in | Power supply for side 2 (output side), VCC2, with a recommended supply range of 2.25 V to 5.5 V and a 0.1-µF bypass capacitor to GND2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Signal Isolation Devices |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | | 6 | V | Voltages relative to local ground (GND1 or GND2), peak | 6 |
| Voltage at INx, OUTx | V | -0.5 | | | V | Max VCCX + 0.5, must not exceed 6 V | 6 |
| Output current | IO | -15 | | 15 | mA | | 6 |
| Junction temperature | TJ | | | 150 | °C | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| Supply voltage | VCC1, VCC2 | 2.25 | | 5.5 | V | VCC1 and VCC2 can be set independently of one another | 7 |
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | 2 | | 2.25 | V | | 7 |
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | 1.7 | | 1.8 | V | | 7 |
| Supply voltage UVLO hysteresis | VHYS(UVLO) | 100 | | 200 | mV | | 7 |
| High level output current | IOH | -4 | | | mA | VCCO = 5 V | 7 |
| High level output current | IOH | -2 | | | mA | VCCO = 3.3 V | 7 |
| High level output current | IOH | -1 | | | mA | VCCO = 2.5 V | 7 |
| Low level output current | IOL | | | 4 | mA | VCCO = 5 V | 7 |
| Low level output current | IOL | | | 2 | mA | VCCO = 3.3 V | 7 |
| Low level output current | IOL | | | 1 | mA | VCCO = 2.5 V | 7 |
| Low level input voltage | VIL | 0 | | | V | | 7 |
| Data rate | DR | 0 | | 100 | Mbps | 100 Mbps is the maximum specified data rate | 7 |
| Ambient temperature | TA | -55 | 25 | 125 | °C | | 7 |
| Low-level output voltage | VOL | | 0.2 | 0.4 | V | VCC1 = VCC2 = 5 V ± 10%; IOL = 4 mA; see Figure 7-1 | 13 |
| High-level input current | IIH | | | 10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIH = VCCI at INx | 13 |
| Low-level input current | IIL | -10 | | | µA | VCC1 = VCC2 = 5 V ± 10%; VIL = 0 V at INx | 13 |
| Common mode transient immunity | CMTI | 85 | 100 | | kV/μs | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V; see Figure 7-3 | 13 |
| Supply current - DC signal (F suffix, VI = 0 V) | ICC1, ICC2 | | 1 | 2.2 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = 0 V (ISO7721-Q1 with F suffix) | 13 |
| Supply current - DC signal (F suffix, VI = VCCI) | ICC1, ICC2 | | 2.2 | 3.4 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI (ISO7721-Q1 with F suffix) | 13 |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | | 1.7 | 2.9 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 13 |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | | 2.2 | 3.5 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 13 |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | | 7.3 | 9.9 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 13 |
| Low-level output voltage | VOL | | 0.1 | 0.3 | V | VCC1 = VCC2 = 3.3 V ± 10%; IOL = 2mA; see Figure 7-1 | 14 |
| Supply current - DC signal (F suffix, VI = 0 V) | ICC1, ICC2 | | 1 | 2.1 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = 0 V (ISO7721-Q1 with F suffix) | 14 |
| Supply current - DC signal (F suffix, VI = VCCI) | ICC1, ICC2 | | 2.2 | 3.4 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCCI (ISO7721-Q1 with F suffix) | 14 |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | | 1.6 | 2.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 14 |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | | 2 | 3.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 14 |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | | 5.6 | 7.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 14 |
| Low-level output voltage | VOL | | 0.05 | 0.2 | V | VCC1 = VCC2 = 2.5 V ± 10%; IOL = 1mA; see Figure 7-1 | 15 |
| Supply current - DC signal (F suffix, VI = 0 V) | ICC1, ICC2 | | 1 | 2.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = 0 V (ISO7721-Q1 with F suffix) | 15 |
| Supply current - DC signal (F suffix, VI = VCCI) | ICC1, ICC2 | | 2.2 | 3.3 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCCI (ISO7721-Q1 with F suffix) | 15 |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | | 1.6 | 2.7 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 15 |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | | 1.9 | 3.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 15 |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | | 4.6 | 6.5 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF | 15 |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 17 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 7-1 | 16 |
| Pulse width distortion | PWD | | 0.5 | 5.9 | ns | VCC1 = VCC2 = 5 V ± 10% | 16 |
| Channel-to-channel output skew time | tsk(o) | | | 4 | ns | VCC1 = VCC2 = 5 V ± 10%; same direction channels | 16 |
| Part-to-part skew time | tsk(pp) | | | 4.5 | ns | VCC1 = VCC2 = 5 V ± 10% | 16 |
| Output signal rise time | tr | | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 7-1 | 16 |
| Output signal fall time | tf | | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 7-1 | 16 |
| Default output delay time from input power loss | tDO | | 0.1 | 0.3 | µs | VCC1 = VCC2 = 5 V ± 10%; measured from the time VCC goes below 1.7 V; see Figure 7-2 | 16 |
| Time interval error | tie | | | 1 | ns | VCC1 = VCC2 = 5 V ± 10%; 16, 1 PRBS data at 100 Mbps | 16 |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 18.5 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 7-1 | 16 |
| Channel-to-channel output skew time | tsk(o) | | | 4.4 | ns | VCC1 = VCC2 = 3.3 V ± 10%; same direction channels | 16 |
| Part-to-part skew time | tsk(pp) | | | 5 | ns | VCC1 = VCC2 = 3.3 V ± 10% | 16 |
| Output signal rise time | tr | | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 7-1 | 16 |
| Output signal fall time | tf | | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 7-1 | 16 |
| Propagation delay time | tPLH, tPHL | 7.5 | 12 | 21 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 7-1 | 17 |
| Channel-to-channel output skew time | tsk(o) | | | 4.4 | ns | VCC1 = VCC2 = 2.5 V ± 10%; same direction channels | 17 |
| Part-to-part skew time | tsk(pp) | | | 5.5 | ns | VCC1 = VCC2 = 2.5 V ± 10% | 17 |
| Output signal rise time | tr | | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 7-1 | 17 |
| Output signal fall time | tf | | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 7-1 | 17 |
| Default output delay time from input power loss | tDO | | 0.1 | 0.3 | µs | VCC1 = VCC2 = 2.5 V ± 10%; measured from the time VCC goes below 1.7 V; see Figure 7-2 | 17 |
| Junction-to-ambient thermal resistance (D, 8-pin SOIC) | RθJA | | 137.7 | | °C/W | D (8-pin SOIC) package | 8 |
## CAD (KiCad official)
- Symbol: `ISO7721FQDRQ1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `iso7721fqdrq1-etched.step` / `iso7721fqdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso7721fqdrq1.step` / `iso7721fqdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso7721-q1.pdf) (45 pp, sha256 `913f758cc5cc90d3`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iso7721fqdrq1-datasheet.pdf)