main
Ray
Publish 0.1.0
21d79db
ISO7721FDWR
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7721FDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground connection for VCC1; side-1 voltages are referenced to this terminal. |
| 2 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 3 | VCC1 | power_in | Power supply for side 1; absolute maximum supply voltage is 6 V with respect to GND1 (-0.5 V minimum). |
| 4 | OUTA | output | Output, channel A on side 1; output voltage must stay between -0.5 V and VCCX + 0.5 V (not exceeding 6 V), and output current is limited to ±15 mA. |
| 5 | INB | input | Input, channel B on side 1; input voltage must stay between -0.5 V and VCC1 + 0.5 V (not exceeding 6 V). |
| 6 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 7 | GND1 | power_in | Ground connection for VCC1; side-1 voltages are referenced to this terminal. |
| 8 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 9 | GND2 | power_in | Ground connection for VCC2; side-2 voltages are referenced to this terminal. |
| 10 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 11 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 12 | OUTB | output | Output, channel B on side 2; output voltage must stay between -0.5 V and VCCX + 0.5 V (not exceeding 6 V), and output current is limited to ±15 mA. |
| 13 | INA | input | Input, channel A on side 2; input voltage must stay between -0.5 V and VCC2 + 0.5 V (not exceeding 6 V). |
| 14 | VCC2 | power_in | Power supply for side 2; absolute maximum supply voltage is 6 V with respect to GND2 (-0.5 V minimum). |
| 15 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 16 | GND2 | power_in | Ground connection for VCC2; side-2 voltages are referenced to this terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | 7 | ||
| Output current | IO | -15 | 15 | mA | 7 | ||
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | 8 | ||
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | 2 | 2.25 | V | 8 | ||
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | 1.7 | 1.8 | V | 8 | ||
| Supply voltage UVLO hysteresis | VHYS(UVLO) | 100 | 200 | mV | 8 | ||
| High level output current | IOH | -4 | mA | VCCO = 5 V | 8 | ||
| High level output current | IOH | -2 | mA | VCCO = 3.3 V | 8 | ||
| High level output current | IOH | -1 | mA | VCCO = 2.5 V | 8 | ||
| Low level output current | IOL | 4 | mA | VCCO = 5 V | 8 | ||
| Low level output current | IOL | 2 | mA | VCCO = 3.3 V | 8 | ||
| Low level output current | IOL | 1 | mA | VCCO = 2.5 V | 8 | ||
| Low level Input voltage | VIL | 0 | V | 8 | |||
| Data Rate | DR | 0 | 100 | Mbps | 8 | ||
| Ambient temperature | TA | -55 | 25 | 125 | °C | 8 | |
| Maximum power dissipation (both sides) | PD | 110 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 9 | ||
| Maximum power dissipation (side-1) | PD1 | 55 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 9 | ||
| Maximum power dissipation (side-2) | PD2 | 55 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 9 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC1 = VCC2 = 5 V ± 10%; IOL = 4 mA; see Figure 7-1 | 14 | |
| Low-level output voltage | VOL | 0.1 | 0.3 | V | VCC1 = VCC2 = 3.3 V ± 10%; IOL = 2mA; see Figure 7-1 | 15 | |
| Low-level output voltage | VOL | 0.05 | 0.2 | V | VCC1 = VCC2 = 2.5 V ± 10%; IOL = 1mA; see Figure 7-1 | 16 | |
| High-level input current | IIH | 10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIH = VCCI at INx | 14 | ||
| Low-level input current | IIL | -10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIL = 0 V at INx | 14 | ||
| Common mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V; see Figure 7-3 | 14 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V; see Figure 7-3 | 15 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/μs | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V, see Figure 7-3 | 16 | |
| Supply current - DC signal (VI = 0 V, ISO7721 with F suffix) | ICC1, ICC2 | 1 | 2.2 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = 0 V (ISO7721 with F suffix) | 14 | |
| Supply current - DC signal (VI = VCCI, ISO7721 with F suffix) | ICC1, ICC2 | 2.2 | 3.4 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI (ISO7721 with F suffix) | 14 | |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | 1.7 | 2.9 | mA | VCC1 = VCC2 = 5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 14 | |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | 2.2 | 3.5 | mA | VCC1 = VCC2 = 5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 14 | |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | 7.3 | 9.9 | mA | VCC1 = VCC2 = 5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 14 | |
| Supply current - DC signal (VI = 0 V, ISO7721 with F suffix) | ICC1, ICC2 | 1 | 2.1 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = 0 V (ISO7721 with F suffix) | 15 | |
| Supply current - DC signal (VI = VCCI, ISO7721 with F suffix) | ICC1, ICC2 | 2.2 | 3.4 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCCI (ISO7721 with F suffix) | 15 | |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | 1.6 | 2.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 15 | |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | 2 | 3.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 15 | |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | 5.6 | 7.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 15 | |
| Supply current - DC signal (VI = 0 V, ISO7721 with F suffix) | ICC1, ICC2 | 1 | 2.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = 0 V (ISO7721 with F suffix) | 16 | |
| Supply current - DC signal (VI = VCCI, ISO7721 with F suffix) | ICC1, ICC2 | 2.2 | 3.3 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCCI (ISO7721 with F suffix) | 16 | |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | 1.6 | 2.7 | mA | VCC1 = VCC2 = 2.5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 16 | |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | 1.9 | 3.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 16 | |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | 4.6 | 6.5 | mA | VCC1 = VCC2 = 2.5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 16 | |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 17 | ns | VCC1 = VCC2 = 5 V ± 10%; See Figure 7-1 | 17 |
| Output signal rise time | tr | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; See Figure 7-1 | 17 | |
| Output signal fall time | tf | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; See Figure 7-1 | 17 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | μs | VCC1 = VCC2 = 5 V ± 10%; Measured from the time VCC goes below 1.7V. See Figure 7-2 | 17 | |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 18.5 | ns | VCC1 = VCC2 = 3.3 V ± 10%; See Figure 7-1 | 17 |
| Output signal rise time | tr | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; See Figure 7-1 | 17 | |
| Output signal fall time | tf | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; See Figure 7-1 | 17 | |
| Propagation delay time | tPLH, tPHL | 7.5 | 12 | 21 | ns | VCC1 = VCC2 = 2.5 V ± 10%; See Figure 7-1 | 18 |
| Output signal rise time | tr | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; See Figure 7-1 | 18 | |
| Output signal fall time | tf | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; See Figure 7-1 | 18 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | μs | VCC1 = VCC2 = 2.5 V ± 10%; Measured from the time VCC goes below 1.7V. See Figure 7-2 | 18 | |
| Thermal resistance, junction-to-ambient (DW) | RθJA | 86.5 | °C/W | 9 | |||
| Thermal resistance, junction-to-case (top) (DW) | RθJC(top) | 49.6 | °C/W | 9 | |||
| Thermal resistance, junction-to-board (DW) | RθJB | 49.7 | °C/W | 9 |
CAD (KiCad official)
- Symbol:
ISO7721FDWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7721fdwr-etched.step/iso7721fdwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7721fdwr.step/iso7721fdwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
fb039c00ceb601b9, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISO7721FDWR
**Texas Instruments** · Digital Isolators · SOIC-16-300mil
ISO7721FDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground connection for VCC1; side-1 voltages are referenced to this terminal. |
| 2 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 3 | VCC1 | power_in | Power supply for side 1; absolute maximum supply voltage is 6 V with respect to GND1 (-0.5 V minimum). |
| 4 | OUTA | output | Output, channel A on side 1; output voltage must stay between -0.5 V and VCCX + 0.5 V (not exceeding 6 V), and output current is limited to ±15 mA. |
| 5 | INB | input | Input, channel B on side 1; input voltage must stay between -0.5 V and VCC1 + 0.5 V (not exceeding 6 V). |
| 6 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 7 | GND1 | power_in | Ground connection for VCC1; side-1 voltages are referenced to this terminal. |
| 8 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 9 | GND2 | power_in | Ground connection for VCC2; side-2 voltages are referenced to this terminal. |
| 10 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 11 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 12 | OUTB | output | Output, channel B on side 2; output voltage must stay between -0.5 V and VCCX + 0.5 V (not exceeding 6 V), and output current is limited to ±15 mA. |
| 13 | INA | input | Input, channel A on side 2; input voltage must stay between -0.5 V and VCC2 + 0.5 V (not exceeding 6 V). |
| 14 | VCC2 | power_in | Power supply for side 2; absolute maximum supply voltage is 6 V with respect to GND2 (-0.5 V minimum). |
| 15 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 16 | GND2 | power_in | Ground connection for VCC2; side-2 voltages are referenced to this terminal. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | | 6 | V | | 7 |
| Output current | IO | -15 | | 15 | mA | | 7 |
| Junction temperature | TJ | | | 150 | °C | | 7 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 7 |
| Supply voltage | VCC1, VCC2 | 2.25 | | 5.5 | V | | 8 |
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | | 2 | 2.25 | V | | 8 |
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | | 1.7 | 1.8 | V | | 8 |
| Supply voltage UVLO hysteresis | VHYS(UVLO) | | 100 | 200 | mV | | 8 |
| High level output current | IOH | -4 | | | mA | VCCO = 5 V | 8 |
| High level output current | IOH | -2 | | | mA | VCCO = 3.3 V | 8 |
| High level output current | IOH | -1 | | | mA | VCCO = 2.5 V | 8 |
| Low level output current | IOL | | | 4 | mA | VCCO = 5 V | 8 |
| Low level output current | IOL | | | 2 | mA | VCCO = 3.3 V | 8 |
| Low level output current | IOL | | | 1 | mA | VCCO = 2.5 V | 8 |
| Low level Input voltage | VIL | 0 | | | V | | 8 |
| Data Rate | DR | 0 | | 100 | Mbps | | 8 |
| Ambient temperature | TA | -55 | 25 | 125 | °C | | 8 |
| Maximum power dissipation (both sides) | PD | | | 110 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 9 |
| Maximum power dissipation (side-1) | PD1 | | | 55 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 9 |
| Maximum power dissipation (side-2) | PD2 | | | 55 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 9 |
| Low-level output voltage | VOL | | 0.2 | 0.4 | V | VCC1 = VCC2 = 5 V ± 10%; IOL = 4 mA; see Figure 7-1 | 14 |
| Low-level output voltage | VOL | | 0.1 | 0.3 | V | VCC1 = VCC2 = 3.3 V ± 10%; IOL = 2mA; see Figure 7-1 | 15 |
| Low-level output voltage | VOL | | 0.05 | 0.2 | V | VCC1 = VCC2 = 2.5 V ± 10%; IOL = 1mA; see Figure 7-1 | 16 |
| High-level input current | IIH | | | 10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIH = VCCI at INx | 14 |
| Low-level input current | IIL | -10 | | | µA | VCC1 = VCC2 = 5 V ± 10%; VIL = 0 V at INx | 14 |
| Common mode transient immunity | CMTI | 85 | 100 | | kV/μs | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V; see Figure 7-3 | 14 |
| Common mode transient immunity | CMTI | 85 | 100 | | kV/μs | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V; see Figure 7-3 | 15 |
| Common mode transient immunity | CMTI | 85 | 100 | | kV/μs | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCCI or 0 V, VCM = 1200 V, see Figure 7-3 | 16 |
| Supply current - DC signal (VI = 0 V, ISO7721 with F suffix) | ICC1, ICC2 | | 1 | 2.2 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = 0 V (ISO7721 with F suffix) | 14 |
| Supply current - DC signal (VI = VCCI, ISO7721 with F suffix) | ICC1, ICC2 | | 2.2 | 3.4 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = VCCI (ISO7721 with F suffix) | 14 |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | | 1.7 | 2.9 | mA | VCC1 = VCC2 = 5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 14 |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | | 2.2 | 3.5 | mA | VCC1 = VCC2 = 5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 14 |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | | 7.3 | 9.9 | mA | VCC1 = VCC2 = 5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 14 |
| Supply current - DC signal (VI = 0 V, ISO7721 with F suffix) | ICC1, ICC2 | | 1 | 2.1 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = 0 V (ISO7721 with F suffix) | 15 |
| Supply current - DC signal (VI = VCCI, ISO7721 with F suffix) | ICC1, ICC2 | | 2.2 | 3.4 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCCI (ISO7721 with F suffix) | 15 |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | | 1.6 | 2.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 15 |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | | 2 | 3.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 15 |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | | 5.6 | 7.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 15 |
| Supply current - DC signal (VI = 0 V, ISO7721 with F suffix) | ICC1, ICC2 | | 1 | 2.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = 0 V (ISO7721 with F suffix) | 16 |
| Supply current - DC signal (VI = VCCI, ISO7721 with F suffix) | ICC1, ICC2 | | 2.2 | 3.3 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCCI (ISO7721 with F suffix) | 16 |
| Supply current - AC signal, 1 Mbps | ICC1, ICC2 | | 1.6 | 2.7 | mA | VCC1 = VCC2 = 2.5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 16 |
| Supply current - AC signal, 10 Mbps | ICC1, ICC2 | | 1.9 | 3.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 16 |
| Supply current - AC signal, 100 Mbps | ICC1, ICC2 | | 4.6 | 6.5 | mA | VCC1 = VCC2 = 2.5 V ± 10%; All channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 16 |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 17 | ns | VCC1 = VCC2 = 5 V ± 10%; See Figure 7-1 | 17 |
| Output signal rise time | tr | | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; See Figure 7-1 | 17 |
| Output signal fall time | tf | | 2.4 | 3.9 | ns | VCC1 = VCC2 = 5 V ± 10%; See Figure 7-1 | 17 |
| Default output delay time from input power loss | tDO | | 0.1 | 0.3 | μs | VCC1 = VCC2 = 5 V ± 10%; Measured from the time VCC goes below 1.7V. See Figure 7-2 | 17 |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 18.5 | ns | VCC1 = VCC2 = 3.3 V ± 10%; See Figure 7-1 | 17 |
| Output signal rise time | tr | | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; See Figure 7-1 | 17 |
| Output signal fall time | tf | | 0.7 | 3 | ns | VCC1 = VCC2 = 3.3 V ± 10%; See Figure 7-1 | 17 |
| Propagation delay time | tPLH, tPHL | 7.5 | 12 | 21 | ns | VCC1 = VCC2 = 2.5 V ± 10%; See Figure 7-1 | 18 |
| Output signal rise time | tr | | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; See Figure 7-1 | 18 |
| Output signal fall time | tf | | 1 | 3.5 | ns | VCC1 = VCC2 = 2.5 V ± 10%; See Figure 7-1 | 18 |
| Default output delay time from input power loss | tDO | | 0.1 | 0.3 | μs | VCC1 = VCC2 = 2.5 V ± 10%; Measured from the time VCC goes below 1.7V. See Figure 7-2 | 18 |
| Thermal resistance, junction-to-ambient (DW) | RθJA | | 86.5 | | °C/W | | 9 |
| Thermal resistance, junction-to-case (top) (DW) | RθJC(top) | | 49.6 | | °C/W | | 9 |
| Thermal resistance, junction-to-board (DW) | RθJB | | 49.7 | | °C/W | | 9 |
## CAD (KiCad official)
- Symbol: `ISO7721FDWR`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `iso7721fdwr-etched.step` / `iso7721fdwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso7721fdwr.step` / `iso7721fdwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso7721.pdf) (51 pp, sha256 `fb039c00ceb601b9`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iso7721fdwr-datasheet.pdf)