3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISO7710DWR
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7710DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground connection for VCC1, the isolator's input-side supply. |
| 2 | NC | unconnected | Not connected; the pin has no internal connection. |
| 3 | VCC1 | power_in | Power supply for the input side (VCC1); the device supply range is 2.25 V to 5.5 V. |
| 4 | IN | input | Input channel of the isolator, which is isolated from the output channel by the SiO2 barrier. |
| 5 | NC | unconnected | Not connected; the pin has no internal connection. |
| 6 | NC | unconnected | Not connected; the pin has no internal connection. |
| 7 | GND1 | power_in | Ground connection for VCC1, the isolator's input-side supply. |
| 8 | NC | unconnected | Not connected; the pin has no internal connection. |
| 9 | GND2 | power_in | Ground connection for VCC2, the isolator's output-side supply. |
| 10 | NC | unconnected | Not connected; the pin has no internal connection. |
| 11 | NC | unconnected | Not connected; the pin has no internal connection. |
| 12 | NC | unconnected | Not connected; the pin has no internal connection. |
| 13 | OUT | output | Output channel of the isolator, which is isolated from the input channel by the SiO2 barrier. |
| 14 | VCC2 | power_in | Power supply for the output side (VCC2); the device supply range is 2.25 V to 5.5 V. |
| 15 | NC | unconnected | Not connected; the pin has no internal connection. |
| 16 | GND2 | power_in | Ground connection for VCC2, the isolator's output-side supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | 6 | ||
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | 2 | 2.25 | V | 6 | ||
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | 1.7 | 1.8 | V | 6 | ||
| Supply voltage UVLO hysteresis | VHYS(UVLO) | 100 | 200 | mV | 6 | ||
| High level output current | IOH | -4 | mA | VCC2 = 5 V | 6 | ||
| High level output current | IOH | -2 | mA | VCC2 = 3.3 V | 6 | ||
| High level output current | IOH | -1 | mA | VCC2 = 2.5 V | 6 | ||
| Low level output current | IOL | 4 | mA | VCC2 = 5 V | 6 | ||
| Low level output current | IOL | 2 | mA | VCC2 = 3.3 V | 6 | ||
| Low level output current | IOL | 1 | mA | VCC2 = 2.5 V | 6 | ||
| Data rate | DR | 0 | 100 | Mbps | 6 | ||
| Ambient temperature | TA | -55 | 25 | 125 | °C | 6 | |
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | 5 | ||
| Voltage at INx, OUTx | V | -0.5 | V | 5 | |||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Maximum power dissipation (both sides) | PD | 55 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 50-MHz 50% duty cycle square wave | 7 | ||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC1 = VCC2 = 5 V ± 10%; IOL = 4 mA; see Figure 6-1 | 11 | |
| Low-level output voltage | VOL | 0.1 | 0.3 | V | VCC1 = VCC2 = 3.3 V ± 10%; IOL = 2mA; see Figure 6-1 | 12 | |
| Low-level output voltage | VOL | 0.05 | 0.2 | V | VCC1 = VCC2 = 2.5 V ± 10%; IOL = 1mA; see Figure 6-1 | 13 | |
| High-level input current | IIH | 10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIH = VCC1 at INx | 11 | ||
| High-level input current | IIH | 10 | µA | VCC1 = VCC2 = 3.3 V ± 10%; VIH = VCC1 at INx | 12 | ||
| High-level input current | IIH | 10 | µA | VCC1 = VCC2 = 2.5 V ± 10%; VIH = VCC1 at INx | 13 | ||
| Low-level input current | IIL | -10 | µA | VCC1 = VCC2 = 5 V ± 10%; VIL = 0 V at INx | 11 | ||
| Low-level input current | IIL | -10 | µA | VCC1 = VCC2 = 3.3 V ± 10%; VIL = 0 V at INx | 12 | ||
| Low-level input current | IIL | -10 | µA | VCC1 = VCC2 = 2.5 V ± 10%; VIL = 0 V at INx | 13 | ||
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VCC1 = VCC2 = 5 V ± 10%; VI = VCC1 or 0 V, VCM = 1200 V; see Figure 6-3 | 11 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCC1 or 0 V, VCM = 1200 V; see Figure 6-3 | 12 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCC1 or 0 V, VCM = 1200 V; see Figure 6-3 | 13 | |
| Supply current DC signal, ICC1 | ICC1 | 0.5 | 1.2 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = VCC1 (ISO7710), VI = 0 V (ISO7710 with F suffix) | 11 | |
| Supply current DC signal, ICC2 | ICC2 | 0.6 | 1.2 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = VCC1 (ISO7710), VI = 0 V (ISO7710 with F suffix) | 11 | |
| Supply current DC signal, ICC1 | ICC1 | 1.6 | 2.4 | mA | VCC1 = VCC2 = 5 V ± 10%; VI = 0V (ISO7710), VI = VCC1 (ISO7710 with F suffix) | 11 | |
| Supply current DC signal, ICC1 | ICC1 | 0.5 | 1.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCC1 (ISO7710), VI = 0 V (ISO7710 with F suffix) | 12 | |
| Supply current DC signal, ICC2 | ICC2 | 0.6 | 1.1 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = VCC1 (ISO7710), VI = 0 V (ISO7710 with F suffix) | 12 | |
| Supply current DC signal, ICC1 | ICC1 | 1.6 | 2.4 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = 0V (ISO7710), VI = VCC1 (ISO7710 with F suffix) | 12 | |
| Supply current DC signal, ICC2 | ICC2 | 0.6 | 1.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; VI = 0V (ISO7710), VI = VCC1 (ISO7710 with F suffix) | 12 | |
| Supply current DC signal, ICC1 | ICC1 | 0.5 | 1.2 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCC1 (ISO7710), VI = 0 V (ISO7710 with F suffix) | 13 | |
| Supply current DC signal, ICC2 | ICC2 | 0.6 | 1.1 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = VCC1 (ISO7710), VI = 0 V (ISO7710 with F suffix) | 13 | |
| Supply current DC signal, ICC1 | ICC1 | 1.6 | 2.3 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = 0V (ISO7710), VI = VCC1 (ISO7710 with F suffix) | 13 | |
| Supply current DC signal, ICC2 | ICC2 | 0.6 | 1.2 | mA | VCC1 = VCC2 = 2.5 V ± 10%; VI = 0V (ISO7710), VI = VCC1 (ISO7710 with F suffix) | 13 | |
| Supply current AC signal 1 Mbps, ICC1 | ICC1 | 1.1 | 1.8 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 11 | |
| Supply current AC signal 1 Mbps, ICC2 | ICC2 | 0.6 | 1.3 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 11 | |
| Supply current AC signal 1 Mbps, ICC1 | ICC1 | 1.1 | 1.8 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 12 | |
| Supply current AC signal 1 Mbps, ICC2 | ICC2 | 0.6 | 1.2 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 12 | |
| Supply current AC signal 1 Mbps, ICC1 | ICC1 | 1.1 | 1.8 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 13 | |
| Supply current AC signal 1 Mbps, ICC2 | ICC2 | 0.6 | 1.2 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 13 | |
| Supply current AC signal 100 Mbps, ICC1 | ICC1 | 1.4 | 2.3 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 11 | |
| Supply current AC signal 100 Mbps, ICC2 | ICC2 | 5.9 | 7.4 | mA | VCC1 = VCC2 = 5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 11 | |
| Supply current AC signal 100 Mbps, ICC1 | ICC1 | 1.3 | 2.1 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 12 | |
| Supply current AC signal 100 Mbps, ICC2 | ICC2 | 4.3 | 5.6 | mA | VCC1 = VCC2 = 3.3 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 12 | |
| Supply current AC signal 100 Mbps, ICC1 | ICC1 | 1.2 | 2 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 13 | |
| Supply current AC signal 100 Mbps, ICC2 | ICC2 | 3.4 | 4.6 | mA | VCC1 = VCC2 = 2.5 V ± 10%; all channels switching with square wave clock input; CL = 15 pF; 100 Mbps | 13 | |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 17 | ns | VCC1 = VCC2 = 5 V ± 10%; see Figure 6-1 | 14 |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 18.5 | ns | VCC1 = VCC2 = 3.3 V ± 10%; see Figure 6-1 | 14 |
| Propagation delay time | tPLH, tPHL | 7.5 | 12 | 21 | ns | VCC1 = VCC2 = 2.5 V ± 10%; see Figure 6-1 | 15 |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | μs | VCC1 = VCC2 = 5 V ± 10%; measured from the time VCC1 goes below 1.7V; see Figure 6-2 | 14 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | μs | VCC1 = VCC2 = 2.5 V ± 10%; measured from the time VCC1 goes below 1.7V; see Figure 6-2 | 15 |
CAD (KiCad official)
- Symbol:
ISO7710DWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7710dwr-etched.step/iso7710dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7710dwr.step/iso7710dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
42fc3c704c9ca0c4, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).