main
Ray
Publish 0.1.0
c776fa2
ISO7631FMDWR
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7631FMDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Input-side supply pin for VCC1; the M-Grade recommended supply range is 2.7 V to 5.5 V. |
| 2 | GND1 | power_in | Ground connection for VCC1 (input-side ground). |
| 3 | INA | input | Logic input for channel A; all inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies. |
| 4 | INB | input | Logic input for channel B; all inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies. |
| 5 | OUTC | output | Output for channel C; the device defaults to the low state in fail-safe mode. |
| 6 | NC | unconnected | No connect; the pin is floating with no internal connection. |
| 7 | EN1 | input | Enable input for OUTC: enables the output when High or open and disables it when Low. |
| 8 | GND1 | power_in | Ground connection for VCC1 (input-side ground). |
| 9 | GND2 | power_in | Ground connection for VCC2 (output-side ground). |
| 10 | EN2 | input | Enable input for OUTA and OUTB: enables the outputs when High or open and disables them when Low. |
| 11 | NC | unconnected | No connect; the pin is floating with no internal connection. |
| 12 | INC | input | Logic input for channel C; all inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies. |
| 13 | OUTB | output | Output for channel B; the device defaults to the low state in fail-safe mode. |
| 14 | OUTA | output | Output for channel A; the device defaults to the low state in fail-safe mode. |
| 15 | GND2 | power_in | Ground connection for VCC2 (output-side ground). |
| 16 | VCC2 | power_in | Output-side supply pin for VCC2; the M-Grade recommended supply range is 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | 5 | ||
| Voltage at INx, OUTx, ENx | -0.5 | 6 | V | 5 | |||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 5 | ||
| Supply voltage (M-Grade) | VCC1, VCC2 | 2.7 | 5.5 | V | M-Grade | 5 | |
| High-level output current | IOH | -4 | mA | 5 | |||
| Low-level output current | IOL | 4 | mA | 5 | |||
| High-level input voltage | VIH | 2 | 5.5 | V | 5 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 5 | ||
| Input pulse duration (M-Grade, ≥3-V operation) | tui | 6.67 | ns | M-Grade: ≥3-V Operation | 5 | ||
| Input pulse duration (M-Grade, <3-V operation) | tui | 10 | ns | M-Grade: <3-V Operation | 5 | ||
| Signaling rate (M-Grade, ≥3-V operation) | 1/tui | 0 | 150 | Mbps | M-Grade: ≥3-V Operation | 5 | |
| Signaling rate (M-Grade, <3-V operation) | 1/tui | 0 | 100 | Mbps | M-Grade: <3-V Operation | 5 | |
| Junction temperature | TJ | -40 | 136 | °C | 5 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC1 and VCC2 at 5 V ±10%; IOL = 4 mA; see Figure 16 | 6 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | VCC1 and VCC2 at 5 V ±10%; IOL = 20 μA; see Figure 16 | 6 | |
| High-level input current | IIH | 10 | μA | VCC1 and VCC2 at 5 V ±10%; VIH = VCC at INx or ENx | 6 | ||
| Low-level input current | IIL | -10 | μA | VCC1 and VCC2 at 5 V ±10%; VIL = 0 V at INx or ENx | 6 | ||
| Common-mode transient immunity | CMTI | 25 | 75 | kV/μs | VCC1 and VCC2 at 5 V ±10%; VI = VCCI or 0 V; see Figure 19 | 6 | |
| Common-mode transient immunity | CMTI | 25 | 50 | kV/μs | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; VI = VCCI or 0 V; see Figure 19 | 6 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOL = 4 mA; see Figure 16 | 7 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOL = 20 μA; see Figure 16 | 7 | |
| High-level input current | IIH | 10 | μA | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; VIH = VCC at INx or ENx | 7 | ||
| Low-level input current | IIL | -10 | μA | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; VIL = 0 V at INx or ENx | 7 | ||
| Common-mode transient immunity | CMTI | 25 | 50 | kV/μs | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; VI = VCCI or 0 V; see Figure 19 | 7 | |
| High-level output voltage | VOH | 4.8 | V | VCC1 and VCC2 at 5 V ±10%; IOH = -4 mA; see Figure 16 | 6 | ||
| High-level output voltage | VOH | 5 | V | VCC1 and VCC2 at 5 V ±10%; IOH = -20 μA; see Figure 16 | 6 | ||
| High-level output voltage (OUTx on VCC1 5 V side) | VOH | 4.8 | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -4 mA; see Figure 16 | 6 | ||
| High-level output voltage (OUTx on VCC2 3.3 V side) | VOH | 3 | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -4 mA; see Figure 16 | 6 | ||
| High-level output voltage (OUTx on VCC1 5 V side) | VOH | 5 | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -20 μA; see Figure 16 | 6 | ||
| High-level output voltage (OUTx on VCC2 3.3 V side) | VOH | 3.3 | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -20 μA; see Figure 16 | 6 | ||
| High-level output voltage (OUTx on VCC1 3.3 V side) | VOH | 3 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -4 mA; see Figure 16 | 7 | ||
| High-level output voltage (OUTx on VCC2 5 V side) | VOH | 4.8 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -4 mA; see Figure 16 | 7 | ||
| High-level output voltage (OUTx on VCC1 3.3 V side) | VOH | 3.3 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -20 μA; see Figure 16 | 7 | ||
| High-level output voltage (OUTx on VCC2 5 V side) | VOH | 5 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -20 μA; see Figure 16 | 7 | ||
| High-level output voltage | VOH | 3 | V | VCC1 and VCC2 at 3.3 V ±10%; IOH = -4 mA; see Figure 16 | 7 | ||
| High-level output voltage | VOH | 3.3 | V | VCC1 and VCC2 at 3.3 V ±10%; IOH = -20 μA; see Figure 16 | 7 | ||
| High-level output voltage | VOH | 2.4 | V | VCC1 and VCC2 at 2.7 V (ISO7631FM only); IOH = -4 mA; see Figure 16 | 7 | ||
| High-level output voltage | VOH | 2.7 | V | VCC1 and VCC2 at 2.7 V (ISO7631FM only); IOH = -20 μA; see Figure 16 | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 77.5 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 40.4 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 42.2 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ψJT | 15 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ψJB | 41.6 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
ISO7631FMDWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7631fmdwr-etched.step/iso7631fmdwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7631fmdwr.step/iso7631fmdwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
3c4532cefe3243bd, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISO7631FMDWR
**Texas Instruments** · Digital Isolators · SOIC-16-300mil
ISO7631FMDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Input-side supply pin for VCC1; the M-Grade recommended supply range is 2.7 V to 5.5 V. |
| 2 | GND1 | power_in | Ground connection for VCC1 (input-side ground). |
| 3 | INA | input | Logic input for channel A; all inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies. |
| 4 | INB | input | Logic input for channel B; all inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies. |
| 5 | OUTC | output | Output for channel C; the device defaults to the low state in fail-safe mode. |
| 6 | NC | unconnected | No connect; the pin is floating with no internal connection. |
| 7 | EN1 | input | Enable input for OUTC: enables the output when High or open and disables it when Low. |
| 8 | GND1 | power_in | Ground connection for VCC1 (input-side ground). |
| 9 | GND2 | power_in | Ground connection for VCC2 (output-side ground). |
| 10 | EN2 | input | Enable input for OUTA and OUTB: enables the outputs when High or open and disables them when Low. |
| 11 | NC | unconnected | No connect; the pin is floating with no internal connection. |
| 12 | INC | input | Logic input for channel C; all inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies. |
| 13 | OUTB | output | Output for channel B; the device defaults to the low state in fail-safe mode. |
| 14 | OUTA | output | Output for channel A; the device defaults to the low state in fail-safe mode. |
| 15 | GND2 | power_in | Ground connection for VCC2 (output-side ground). |
| 16 | VCC2 | power_in | Output-side supply pin for VCC2; the M-Grade recommended supply range is 2.7 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | -0.5 | | 6 | V | | 5 |
| Voltage at INx, OUTx, ENx | | -0.5 | | 6 | V | | 5 |
| Output current | IO | -15 | | 15 | mA | | 5 |
| Maximum junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 5 |
| Supply voltage (M-Grade) | VCC1, VCC2 | 2.7 | | 5.5 | V | M-Grade | 5 |
| High-level output current | IOH | | | -4 | mA | | 5 |
| Low-level output current | IOL | | | 4 | mA | | 5 |
| High-level input voltage | VIH | 2 | | 5.5 | V | | 5 |
| Low-level input voltage | VIL | 0 | | 0.8 | V | | 5 |
| Input pulse duration (M-Grade, ≥3-V operation) | tui | 6.67 | | | ns | M-Grade: ≥3-V Operation | 5 |
| Input pulse duration (M-Grade, <3-V operation) | tui | 10 | | | ns | M-Grade: <3-V Operation | 5 |
| Signaling rate (M-Grade, ≥3-V operation) | 1/tui | 0 | | 150 | Mbps | M-Grade: ≥3-V Operation | 5 |
| Signaling rate (M-Grade, <3-V operation) | 1/tui | 0 | | 100 | Mbps | M-Grade: <3-V Operation | 5 |
| Junction temperature | TJ | -40 | | 136 | °C | | 5 |
| Ambient temperature | TA | -40 | 25 | 125 | °C | | 5 |
| Low-level output voltage | VOL | | 0.2 | 0.4 | V | VCC1 and VCC2 at 5 V ±10%; IOL = 4 mA; see Figure 16 | 6 |
| Low-level output voltage | VOL | | 0 | 0.1 | V | VCC1 and VCC2 at 5 V ±10%; IOL = 20 μA; see Figure 16 | 6 |
| High-level input current | IIH | | | 10 | μA | VCC1 and VCC2 at 5 V ±10%; VIH = VCC at INx or ENx | 6 |
| Low-level input current | IIL | -10 | | | μA | VCC1 and VCC2 at 5 V ±10%; VIL = 0 V at INx or ENx | 6 |
| Common-mode transient immunity | CMTI | 25 | 75 | | kV/μs | VCC1 and VCC2 at 5 V ±10%; VI = VCCI or 0 V; see Figure 19 | 6 |
| Common-mode transient immunity | CMTI | 25 | 50 | | kV/μs | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; VI = VCCI or 0 V; see Figure 19 | 6 |
| Low-level output voltage | VOL | | 0.2 | 0.4 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOL = 4 mA; see Figure 16 | 7 |
| Low-level output voltage | VOL | | 0 | 0.1 | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOL = 20 μA; see Figure 16 | 7 |
| High-level input current | IIH | | | 10 | μA | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; VIH = VCC at INx or ENx | 7 |
| Low-level input current | IIL | -10 | | | μA | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; VIL = 0 V at INx or ENx | 7 |
| Common-mode transient immunity | CMTI | 25 | 50 | | kV/μs | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; VI = VCCI or 0 V; see Figure 19 | 7 |
| High-level output voltage | VOH | | 4.8 | | V | VCC1 and VCC2 at 5 V ±10%; IOH = -4 mA; see Figure 16 | 6 |
| High-level output voltage | VOH | | 5 | | V | VCC1 and VCC2 at 5 V ±10%; IOH = -20 μA; see Figure 16 | 6 |
| High-level output voltage (OUTx on VCC1 5 V side) | VOH | | 4.8 | | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -4 mA; see Figure 16 | 6 |
| High-level output voltage (OUTx on VCC2 3.3 V side) | VOH | | 3 | | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -4 mA; see Figure 16 | 6 |
| High-level output voltage (OUTx on VCC1 5 V side) | VOH | | 5 | | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -20 μA; see Figure 16 | 6 |
| High-level output voltage (OUTx on VCC2 3.3 V side) | VOH | | 3.3 | | V | VCC1 at 5 V ±10% and VCC2 at 3.3 V ±10%; IOH = -20 μA; see Figure 16 | 6 |
| High-level output voltage (OUTx on VCC1 3.3 V side) | VOH | | 3 | | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -4 mA; see Figure 16 | 7 |
| High-level output voltage (OUTx on VCC2 5 V side) | VOH | | 4.8 | | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -4 mA; see Figure 16 | 7 |
| High-level output voltage (OUTx on VCC1 3.3 V side) | VOH | | 3.3 | | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -20 μA; see Figure 16 | 7 |
| High-level output voltage (OUTx on VCC2 5 V side) | VOH | | 5 | | V | VCC1 at 3.3 V ±10% and VCC2 at 5 V ±10%; IOH = -20 μA; see Figure 16 | 7 |
| High-level output voltage | VOH | | 3 | | V | VCC1 and VCC2 at 3.3 V ±10%; IOH = -4 mA; see Figure 16 | 7 |
| High-level output voltage | VOH | | 3.3 | | V | VCC1 and VCC2 at 3.3 V ±10%; IOH = -20 μA; see Figure 16 | 7 |
| High-level output voltage | VOH | | 2.4 | | V | VCC1 and VCC2 at 2.7 V (ISO7631FM only); IOH = -4 mA; see Figure 16 | 7 |
| High-level output voltage | VOH | | 2.7 | | V | VCC1 and VCC2 at 2.7 V (ISO7631FM only); IOH = -20 μA; see Figure 16 | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 77.5 | | °C/W | | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 40.4 | | °C/W | | 6 |
| Junction-to-board thermal resistance | RθJB | | 42.2 | | °C/W | | 6 |
| Junction-to-top characterization parameter | ψJT | | 15 | | °C/W | | 6 |
| Junction-to-board characterization parameter | ψJB | | 41.6 | | °C/W | | 6 |
## CAD (KiCad official)
- Symbol: `ISO7631FMDWR`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `iso7631fmdwr-etched.step` / `iso7631fmdwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso7631fmdwr.step` / `iso7631fmdwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso7631fm.pdf) (37 pp, sha256 `3c4532cefe3243bd`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iso7631fmdwr-datasheet.pdf)