3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISO7420FED
Texas Instruments · Digital Isolators · SOIC-8
ISO7420FED from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1 (VCC1), recommended 3.0 V to 5.5 V and not above 6 V absolute maximum. |
| 2 | INA | input | Input, channel A (ISO7420 pinout); logic high VIH is 2 V to 5.5 V and logic low VIL is 0 V to 0.8 V. |
| 3 | INB | input | Input, channel B; logic high VIH is 2 V to 5.5 V and logic low VIL is 0 V to 0.8 V. |
| 4 | GND1 | power_in | Ground connection for VCC1. |
| 5 | GND2 | power_in | Ground connection for VCC2. |
| 6 | OUTB | output | Output, channel B; rated for ±4 mA recommended high/low-level output current (±15 mA absolute maximum). |
| 7 | OUTA | output | Output, channel A (ISO7420 pinout); rated for ±4 mA recommended high/low-level output current (±15 mA absolute maximum). |
| 8 | VCC2 | power_in | Power supply for side 2 (VCC2), recommended 3.0 V to 5.5 V and not above 6 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 6 | V | VCC1, VCC2 | 5 | |
| Voltage at IN, OUT | VI | -0.5 | V | max VCC + 0.5, must not exceed 6 V | 5 | ||
| Output current | IO | -15 | 15 | mA | 5 | ||
| Maximum surge immunity | VSRG | 4000 | VPK | Supports IEC 61000-4-5 | 5 | ||
| Maximum junction temperature | TJ(Max) | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -3000 | 3000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD CDM | V(ESD) | -1500 | 1500 | V | Charged-device model, JESD22-C101 | 5 | |
| ESD MM | V(ESD) | -200 | 200 | V | Machine model ANSI/ESDS5.2-1996 | 5 | |
| Supply voltage | VCC1, VCC2 | 3 | 5.5 | V | 5 | ||
| High-level output current | IOH | -4 | mA | 5 | |||
| Low-level output current | IOL | 4 | mA | 5 | |||
| High-level input voltage | VIH | 2 | 5.5 | V | 5 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 5 | ||
| Input pulse duration | tui | 20 | ns | 5 | |||
| Signaling rate | 1 / tui | 0 | 50 | Mbps | Under typical conditions capable of > 150 Mbps | 5 | |
| Junction temperature | TJ | -40 | 136 | °C | 5 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 4 mA; VCC1 and VCC2 = 5 V ± 10% | 6 | |
| Low-level output voltage | VOL | 0 | 0.1 | V | IOL = 20 μA; VCC1 and VCC2 = 5 V ± 10% | 6 | |
| High-level input current | IIH | 10 | μA | INx at 0 V or VCCI; VCC = 5 V ± 10% | 6 | ||
| Low-level input current | IIL | -10 | μA | VCC = 5 V ± 10% | 6 | ||
| Common-mode transient immunity | CMTI | 25 | 50 | kV/μs | VI = VCCI or 0 V; see Figure 18 | 6 | |
| Supply current ICC1, DC to 1 Mbps | ICC1 | 0.4 | 0.8 | mA | DC Input: VI = VCCI or 0 V, AC Input: CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC2, DC to 1 Mbps | ICC2 | 3.4 | 5 | mA | DC Input: VI = VCCI or 0 V, AC Input: CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC1, 10 Mbps | ICC1 | 0.6 | 1 | mA | CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC2, 10 Mbps | ICC2 | 4.5 | 6 | mA | CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC1, 25 Mbps | ICC1 | 1 | 1.5 | mA | CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC2, 25 Mbps | ICC2 | 6.2 | 8 | mA | CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC1, 50 Mbps | ICC1 | 1.7 | 2.5 | mA | CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC2, 50 Mbps | ICC2 | 9 | 12 | mA | CL = 15 pF; VCC = 5 V | 6 | |
| Supply current ICC1, 50 Mbps | ICC1 | 1 | 1.3 | mA | CL = 15 pF; VCC1 and VCC2 = 3.3 V ± 10% | 9 | |
| Supply current ICC2, 50 Mbps | ICC2 | 6.2 | 7.5 | mA | CL = 15 pF; VCC1 and VCC2 = 3.3 V ± 10% | 9 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 4 mA; VCC1 and VCC2 = 3.3 V ± 10% | 9 | |
| Device power dissipation | PD | 138 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, Input a 100-Mbps 50% duty-cycle square wave | 9 | ||
| Propagation delay time | tPLH, tPHL | 7 | 11 | ns | See Figure 16; VCC1 and VCC2 = 5 V ± 10% | 10 | |
| Pulse width distortion /tPHL, tPLH/ | PWD | 0.2 | 3 | ns | ISO7420x; VCC = 5 V ± 10% | 10 | |
| Channel-to-channel output skew time | tsk(o) | 0.3 | 1 | ns | ISO7420x; VCC = 5 V ± 10% | 10 | |
| Part-to-part skew time | tsk(pp) | 3.7 | ns | ISO7420x; VCC = 5 V ± 10% | 10 | ||
| Propagation delay time | tPLH, tPHL | 8.5 | 14 | ns | See Figure 16; VCC1 and VCC2 = 3.3 V ± 10% | 11 | |
| Pulse width distortion /tPHL, tPLH/ | PWD | 0.5 | 2 | ns | ISO7420x and ISO7421x; VCC = 3.3 V ± 10% | 11 | |
| Channel-to-channel output skew time | tsk(o) | 0.4 | 2 | ns | ISO7420x; VCC = 3.3 V ± 10% | 11 | |
| Part-to-part skew time | tsk(pp) | 6.2 | ns | ISO7420x; VCC = 3.3 V ± 10% | 11 | ||
| High-level output voltage | VOH | 4.6 | V | IOH = -4 mA; min is VCCO, 0.8; VCC = 5 V ± 10% | 6 | ||
| High-level output voltage | VOH | 5 | V | IOH = -20 μA; min is VCCO, 0.1; VCC = 5 V ± 10% | 6 | ||
| Input threshold voltage hysteresis | VI(HYS) | 400 | mV | VCC = 5 V ± 10% | 6 | ||
| High-level output voltage | VOH | 3 | V | IOH = -4 mA; min is VCCO, 0.4; VCC = 3.3 V ± 10% | 9 | ||
| Output signal rise time | tr | 1.8 | ns | See Figure 16; VCC = 5 V ± 10% | 10 | ||
| Output signal fall time | tf | 1.7 | ns | See Figure 16; VCC = 5 V ± 10% | 10 | ||
| Fail-safe output delay time from input power loss | tfs | 6 | μs | See Figure 17; VCC = 5 V ± 10% | 10 | ||
| Junction-to-ambient thermal resistance, low-K board | RθJA | 212 | °C/W | D (SOIC) 8 pins, Low-K board | 5 | ||
| Junction-to-ambient thermal resistance, high-K board | RθJA | 116.6 | °C/W | D (SOIC) 8 pins, High-K board | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 57.3 | °C/W | 5 | |||
| Barrier capacitance, input to output | CIO | 1 | pF | VIO = 0.4 sin (2πft), f = 1 MHz | 17 |
CAD (KiCad official)
- Symbol:
ISO7420FED - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
iso7420fed-etched.step/iso7420fed-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7420fed.step/iso7420fed.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
947d3a765c7e0123, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).