main
Ray
Publish 0.1.0
d2800c6
ISO7240CFQDWRQ1
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7240CFQDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Side-1 power supply (VCC1), with a recommended operating range of 3.15 V to 5.5 V. |
| 2 | GND1 | power_in | Side-1 ground connection for VCC1 (GNDI). |
| 3 | INA | input | Input, channel A; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 4 | INB | input | Input, channel B; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 5 | INC | input | Input, channel C; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 6 | IND | input | Input, channel D; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 7 | DISABLE | input | Input disable; all input pins are disabled when DISABLE is high and enabled when DISABLE is low or open. |
| 8 | GND1 | power_in | Side-1 ground connection for VCC1 (GNDI). |
| 9 | GND2 | power_in | Side-2 ground connection for VCC2 (GNDO). |
| 10 | CTRL | input | Failsafe output control; when DISABLE is high or VCC1 is powered down the output is high if CTRL is high or open and low if CTRL is low. |
| 11 | OUTD | output | Output, channel D; recommended output current is limited to 4 mA. |
| 12 | OUTC | output | Output, channel C; recommended output current is limited to 4 mA. |
| 13 | OUTB | output | Output, channel B; recommended output current is limited to 4 mA. |
| 14 | OUTA | output | Output, channel A; recommended output current is limited to 4 mA. |
| 15 | GND2 | power_in | Side-2 ground connection for VCC2 (GNDO). |
| 16 | VCC2 | power_in | Side-2 power supply (VCC2), with a recommended operating range of 3.15 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC1, VCC2 (recommended operating) | VCC | 3.15 | 5.5 | V | VCC1, VCC2 (4.5 V to 5.5 V for 5-V operation) | 5 | |
| High-level output current | IOH | 4 | mA | 5 | |||
| Low-level output current | IOL | -4 | mA | 5 | |||
| Input pulse width | tui | 40 | ns | 5 | |||
| Signaling rate | 1/tui | 0 | 30 | 25 | Mbps | Typical value at room temperature and well-regulated power supply (footnote 1) | 5 |
| High-level input voltage (IN, DISABLE, CTRL, EN) | VIH | 2 | V | IN, DISABLE, CTRL, EN; printed maximum is 'VCC' | 5 | ||
| Low-level input voltage (IN, DISABLE, CTRL, EN) | VIL | 0 | 0.8 | V | IN, DISABLE, CTRL, EN | 5 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 5 | ||
| External magnetic field-strength immunity | H | 1000 | A/m | Per IEC 61000-4-8 and IEC 61000-4-9 certification | 5 | ||
| Supply voltage VCC1, VCC2 (absolute maximum) | VCC | -0.5 | 6 | V | VCC1, VCC2, with respect to local ground | 5 | |
| Voltage at IN, OUT, EN, DISABLE, CTRL | VI | -0.5 | 6 | V | IN, OUT, EN, DISABLE, CTRL | 5 | |
| Electrostatic discharge, Human-Body Model | ESD HBM | -4 | 4 | kV | All pins | 5 | |
| Electrostatic discharge, Field-Induced-Charged Device Model | ESD FICDM | -1 | 1 | kV | 5 | ||
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Device power dissipation, ISO724xC | PD | 220 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150C, CL = 15 pF, 25-Mbps 50% duty cycle square wave | 6 | ||
| Quiescent supply current ICC1 (ISO7240CF, 5-V) | ICC1 | 1 | 3 | mA | VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 | |
| Supply current ICC1 at 25 Mbps (ISO7240CF, 5-V) | ICC1 | 7 | 10.5 | mA | 25 Mbps; VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 | |
| Quiescent supply current ICC2 (ISO7240CF, 5-V) | ICC2 | 15 | 22 | mA | VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 | |
| Supply current ICC2 at 25 Mbps (ISO7240CF, 5-V) | ICC2 | 17 | 25 | mA | 25 Mbps; VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 | |
| Low-level output voltage | VOL | 0.4 | V | IOL = 4 mA | 7 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 20 μA | 7 | ||
| High-level input current | IIH | 10 | μA | IN from 0 V to VCC | 7 | ||
| Low-level input current | IIL | -10 | μA | 7 | |||
| Common-mode transient immunity | CMTI | 25 | 50 | kV/μs | VI = VCC or 0 V; Figure 6-5 | 7 | |
| Propagation delay tPLH, tPHL (5-V) | tPLH, tPHL | 18 | 45 | ns | See Figure 6-1 | 11 | |
| Propagation delay, high-level-to-high-impedance output | tPHZ | 15 | 25 | ns | See Figure 6-2 | 11 | |
| Propagation delay, high-impedance-to-high-level output | tPZH | 15 | 25 | ns | See Figure 6-2 | 11 | |
| Propagation delay, low-level-to-high-impedance output | tPLZ | 15 | 25 | ns | See Figure 6-2 | 11 | |
| Propagation delay, high-impedance-to-low-level output | tPZL | 15 | 25 | ns | See Figure 6-2 | 11 | |
| Failsafe output delay time from input power loss | tfs | 12 | μs | See Figure 6-3 | 11 | ||
| Wake time from input disable | twake | 15 | μs | See Figure 6-4 | 11 | ||
| Pulse-width distortion | PWD | 5 | ns | /tPHL, tPLH/ | 11 | ||
| Part-to-part skew | tsk(pp) | 8 | ns | 11 | |||
| Channel-to-channel output skew | tsk(o) | 3 | ns | ISO7240C, ISO7241C | 11 | ||
| Thermal resistance, junction-to-air (Low-K) | θJA | 168 | °C/W | Low-K thermal resistance | 5 | ||
| Thermal resistance, junction-to-air (High-K) | θJA | 68.6 | °C/W | High-K thermal resistance | 5 | ||
| Thermal resistance, junction-to-board | θJB | 33.5 | °C/W | 5 | |||
| Thermal resistance, junction-to-case | θJC | 33.9 | °C/W | 5 | |||
| Sleep mode output current | IOFF | 0 | μA | EN at 0 V, Single channel | 7 | ||
| Input voltage hysteresis | VI(HYS) | 150 | mV | 7 | |||
| Input capacitance to ground | CI | 2 | pF | IN at VCC, VI = 0.4 sin (2πft), f=2MHz | 7 | ||
| Output signal rise time | tr | 2.4 | ns | See Figure 6-1 | 11 | ||
| Output signal fall time | tf | 2.3 | ns | See Figure 6-1 | 11 |
CAD (KiCad official)
- Symbol:
ISO7240CFQDWRQ1 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7240cfqdwrq1-etched.step/iso7240cfqdwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7240cfqdwrq1.step/iso7240cfqdwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
705408d5f8297188, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISO7240CFQDWRQ1
**Texas Instruments** · Digital Isolators · SOIC-16-300mil
ISO7240CFQDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Side-1 power supply (VCC1), with a recommended operating range of 3.15 V to 5.5 V. |
| 2 | GND1 | power_in | Side-1 ground connection for VCC1 (GNDI). |
| 3 | INA | input | Input, channel A; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 4 | INB | input | Input, channel B; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 5 | INC | input | Input, channel C; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 6 | IND | input | Input, channel D; VIH is 2 V minimum and VIL is 0.8 V maximum, and the input is 5-V tolerant regardless of supply level. |
| 7 | DISABLE | input | Input disable; all input pins are disabled when DISABLE is high and enabled when DISABLE is low or open. |
| 8 | GND1 | power_in | Side-1 ground connection for VCC1 (GNDI). |
| 9 | GND2 | power_in | Side-2 ground connection for VCC2 (GNDO). |
| 10 | CTRL | input | Failsafe output control; when DISABLE is high or VCC1 is powered down the output is high if CTRL is high or open and low if CTRL is low. |
| 11 | OUTD | output | Output, channel D; recommended output current is limited to 4 mA. |
| 12 | OUTC | output | Output, channel C; recommended output current is limited to 4 mA. |
| 13 | OUTB | output | Output, channel B; recommended output current is limited to 4 mA. |
| 14 | OUTA | output | Output, channel A; recommended output current is limited to 4 mA. |
| 15 | GND2 | power_in | Side-2 ground connection for VCC2 (GNDO). |
| 16 | VCC2 | power_in | Side-2 power supply (VCC2), with a recommended operating range of 3.15 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC1, VCC2 (recommended operating) | VCC | 3.15 | | 5.5 | V | VCC1, VCC2 (4.5 V to 5.5 V for 5-V operation) | 5 |
| High-level output current | IOH | | | 4 | mA | | 5 |
| Low-level output current | IOL | -4 | | | mA | | 5 |
| Input pulse width | tui | 40 | | | ns | | 5 |
| Signaling rate | 1/tui | 0 | 30 | 25 | Mbps | Typical value at room temperature and well-regulated power supply (footnote 1) | 5 |
| High-level input voltage (IN, DISABLE, CTRL, EN) | VIH | 2 | | | V | IN, DISABLE, CTRL, EN; printed maximum is 'VCC' | 5 |
| Low-level input voltage (IN, DISABLE, CTRL, EN) | VIL | 0 | | 0.8 | V | IN, DISABLE, CTRL, EN | 5 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 5 |
| External magnetic field-strength immunity | H | 1000 | | | A/m | Per IEC 61000-4-8 and IEC 61000-4-9 certification | 5 |
| Supply voltage VCC1, VCC2 (absolute maximum) | VCC | -0.5 | | 6 | V | VCC1, VCC2, with respect to local ground | 5 |
| Voltage at IN, OUT, EN, DISABLE, CTRL | VI | -0.5 | | 6 | V | IN, OUT, EN, DISABLE, CTRL | 5 |
| Electrostatic discharge, Human-Body Model | ESD HBM | -4 | | 4 | kV | All pins | 5 |
| Electrostatic discharge, Field-Induced-Charged Device Model | ESD FICDM | -1 | | 1 | kV | | 5 |
| Maximum junction temperature | TJ | | | 150 | °C | | 5 |
| Device power dissipation, ISO724xC | PD | | | 220 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150C, CL = 15 pF, 25-Mbps 50% duty cycle square wave | 6 |
| Quiescent supply current ICC1 (ISO7240CF, 5-V) | ICC1 | | 1 | 3 | mA | VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 |
| Supply current ICC1 at 25 Mbps (ISO7240CF, 5-V) | ICC1 | | 7 | 10.5 | mA | 25 Mbps; VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 |
| Quiescent supply current ICC2 (ISO7240CF, 5-V) | ICC2 | | 15 | 22 | mA | VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 |
| Supply current ICC2 at 25 Mbps (ISO7240CF, 5-V) | ICC2 | | 17 | 25 | mA | 25 Mbps; VI = VCC or 0 V, All channels, no load, EN2 at 3 V | 7 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 4 mA | 7 |
| Low-level output voltage | VOL | | | 0.1 | V | IOL = 20 μA | 7 |
| High-level input current | IIH | | | 10 | μA | IN from 0 V to VCC | 7 |
| Low-level input current | IIL | -10 | | | μA | | 7 |
| Common-mode transient immunity | CMTI | 25 | 50 | | kV/μs | VI = VCC or 0 V; Figure 6-5 | 7 |
| Propagation delay tPLH, tPHL (5-V) | tPLH, tPHL | | 18 | 45 | ns | See Figure 6-1 | 11 |
| Propagation delay, high-level-to-high-impedance output | tPHZ | | 15 | 25 | ns | See Figure 6-2 | 11 |
| Propagation delay, high-impedance-to-high-level output | tPZH | | 15 | 25 | ns | See Figure 6-2 | 11 |
| Propagation delay, low-level-to-high-impedance output | tPLZ | | 15 | 25 | ns | See Figure 6-2 | 11 |
| Propagation delay, high-impedance-to-low-level output | tPZL | | 15 | 25 | ns | See Figure 6-2 | 11 |
| Failsafe output delay time from input power loss | tfs | | | 12 | μs | See Figure 6-3 | 11 |
| Wake time from input disable | twake | | | 15 | μs | See Figure 6-4 | 11 |
| Pulse-width distortion | PWD | | | 5 | ns | /tPHL, tPLH/ | 11 |
| Part-to-part skew | tsk(pp) | | | 8 | ns | | 11 |
| Channel-to-channel output skew | tsk(o) | | | 3 | ns | ISO7240C, ISO7241C | 11 |
| Thermal resistance, junction-to-air (Low-K) | θJA | | 168 | | °C/W | Low-K thermal resistance | 5 |
| Thermal resistance, junction-to-air (High-K) | θJA | | 68.6 | | °C/W | High-K thermal resistance | 5 |
| Thermal resistance, junction-to-board | θJB | | 33.5 | | °C/W | | 5 |
| Thermal resistance, junction-to-case | θJC | | 33.9 | | °C/W | | 5 |
| Sleep mode output current | IOFF | | 0 | | μA | EN at 0 V, Single channel | 7 |
| Input voltage hysteresis | VI(HYS) | | 150 | | mV | | 7 |
| Input capacitance to ground | CI | | 2 | | pF | IN at VCC, VI = 0.4 sin (2πft), f=2MHz | 7 |
| Output signal rise time | tr | | 2.4 | | ns | See Figure 6-1 | 11 |
| Output signal fall time | tf | | 2.3 | | ns | See Figure 6-1 | 11 |
## CAD (KiCad official)
- Symbol: `ISO7240CFQDWRQ1`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `iso7240cfqdwrq1-etched.step` / `iso7240cfqdwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso7240cfqdwrq1.step` / `iso7240cfqdwrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso7240cf-q1.pdf) (37 pp, sha256 `705408d5f8297188`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iso7240cfqdwrq1-datasheet.pdf)