Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISO7230CDWR

Texas Instruments · Digital Isolators · SOIC-16-300mil

ISO7230CDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Input-side power supply VCC1 for the input channels; absolute maximum rating is -0.5 V to 6 V, and the part operates from 3.3 V or 5 V supplies.
2 GND1 power_in Ground connection for VCC1 on the input side, isolated from GND2 by the SiO2 isolation barrier.
3 INA input Logic input for channel A; the voltage at INx must stay between -0.5 V and VCC + 0.5 V, and must not exceed 6 V.
4 INB input Logic input for channel B; the voltage at INx must stay between -0.5 V and VCC + 0.5 V, and must not exceed 6 V.
5 INC input Logic input for channel C; the voltage at INx must stay between -0.5 V and VCC + 0.5 V, and must not exceed 6 V.
6 NC unconnected Not connected.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for VCC1 on the input side, isolated from GND2 by the SiO2 isolation barrier.
9 GND2 power_in Ground connection for VCC2 on the output side, isolated from GND1 by the SiO2 isolation barrier.
10 EN input Enable input for channels A, B, and C; the voltage at ENx must stay between -0.5 V and VCC + 0.5 V, and must not exceed 6 V.
11 NC unconnected Not connected.
12 OUTC output Logic output for channel C.
13 OUTB output Logic output for channel B.
14 OUTA output Logic output for channel A.
15 GND2 power_in Ground connection for VCC2 on the output side, isolated from GND1 by the SiO2 isolation barrier.
16 VCC2 power_in Output-side power supply VCC2 for the output channels; absolute maximum rating is -0.5 V to 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1, VCC2 VCC -0.5 6 V All voltages with respect to network ground 4
Voltage at INx, OUTx, ENx VI -0.5 V Max printed as VCC + 0.5, must not exceed 6 V 4
Output current IO -15 15 mA 4
Maximum junction temperature TJ 170 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC1, VCC2 VCC 3.15 5.5 V VCC1, VCC2 5
High-level input voltage, ISO723xC VIH 2 5.5 V ISO723xC 5
Low-level input voltage, ISO723xC VIL 0 0.8 V ISO723xC 5
Signaling rate, ISO723xC 1/tui 0 25 30 Mbps ISO723xC; typical measured at ideal conditions at 25°C 5
Input pulse width, ISO723xC tui 40 ns ISO723xC 5
Ambient temperature TA -40 25 125 °C 5
High-level output current IOH -4 mA 5
Low-level output current IOL 4 mA 5
Junction temperature TJ 150 °C 5
Quiescent supply current ICC1 (VCC1 3.3 V) ICC1 0.5 1.2 mA VCC1, VCC2 at 3.3 V; quiescent, VI = VCCI or 0 V, all channels, no load, EN at 3 V 7
ICC1 at 25 Mbps (VCC1 3.3 V) ICC1 3 5 mA VCC1, VCC2 at 3.3 V; 25 Mbps 7
Quiescent supply current ICC2 (VCC2 3.3 V) ICC2 9 15 mA VCC1, VCC2 at 3.3 V; quiescent, VI = VCCI or 0 V, all channels, no load, EN at 3 V 7
ICC2 at 25 Mbps (VCC2 3.3 V) ICC2 10 17 mA VCC1, VCC2 at 3.3 V; 25 Mbps 7
Sleep mode output current IOFF 0 μA ENx at 0 V, single channel; VCC at 3.3 V 7
Low-level output voltage, IOL = 4 mA VOL 0.4 V IOL = 4 mA, See Figure 7-1; VCC at 3.3 V 7
Low-level output voltage, IOL = 20 μA VOL 0.1 V IOL = 20 μA, See Figure 7-1; VCC at 3.3 V 7
High-level input current IIH 10 μA INx at VCCI; VCC at 3.3 V 7
Low-level input current IIL -10 μA INx at 0 V; VCC at 3.3 V 7
Common-mode transient immunity CMTI 25 50 kV/μs VI = VCCI or 0 V, See Figure 7-4; VCC at 3.3 V 7
Quiescent supply current ICC1 (VCC1 5 V) ICC1 1 3 mA VCC1, VCC2 at 5 V; quiescent, VI = VCCI or 0 V, all channels, no load, EN at 3 V 8
ICC1 at 25 Mbps (VCC1 5 V) ICC1 7 9.5 mA VCC1, VCC2 at 5 V; 25 Mbps 8
Quiescent supply current ICC2 (VCC2 5 V) ICC2 15 22 mA VCC1, VCC2 at 5 V; quiescent, VI = VCCI or 0 V, all channels, no load, EN at 3 V 8
ICC2 at 25 Mbps (VCC2 5 V) ICC2 17 24 mA VCC1, VCC2 at 5 V; 25 Mbps 8
Sleep mode output current IOFF 0 μA ENx at 0 V, single channel; VCC at 5 V 8
Low-level output voltage, IOL = 4 mA VOL 0.4 V IOL = 4 mA, See Figure 7-1; VCC at 5 V 8
Low-level output voltage, IOL = 20 μA VOL 0.1 V IOL = 20 μA, See Figure 7-1; VCC at 5 V 8
High-level input current IIH 10 μA INx at VCCI; VCC at 5 V 8
Low-level input current IIL -10 μA INx at 0 V; VCC at 5 V 8
Common-mode transient immunity CMTI 25 50 kV/μs VI = VCCI or 0 V, See Figure 7-4; VCC at 5 V 8
Quiescent supply current ICC1 (VCC1 3.3 V, VCC2 5 V) ICC1 0.5 1.2 mA VCC1 at 3.3 V, VCC2 at 5 V; quiescent, all channels, no load, EN at 3 V 8
ICC1 at 25 Mbps (VCC1 3.3 V, VCC2 5 V) ICC1 3 5 mA VCC1 at 3.3 V, VCC2 at 5 V; 25 Mbps 8
Quiescent supply current ICC2 (VCC1 3.3 V, VCC2 5 V) ICC2 15 22 mA VCC1 at 3.3 V, VCC2 at 5 V; quiescent, all channels, no load, EN at 3 V 8
ICC2 at 25 Mbps (VCC1 3.3 V, VCC2 5 V) ICC2 17 24 mA VCC1 at 3.3 V, VCC2 at 5 V; 25 Mbps 8
Quiescent supply current ICC1 (VCC1 5 V, VCC2 3.3 V) ICC1 1 3 mA VCC1 at 5 V, VCC2 at 3.3 V; quiescent, all channels, no load, EN at 3 V 10
ICC1 at 25 Mbps (VCC1 5 V, VCC2 3.3 V) ICC1 7 9.5 mA VCC1 at 5 V, VCC2 at 3.3 V; 25 Mbps 10
Quiescent supply current ICC2 (VCC1 5 V, VCC2 3.3 V) ICC2 9 15 mA VCC1 at 5 V, VCC2 at 3.3 V; quiescent, all channels, no load, EN at 3 V 10
ICC2 at 25 Mbps (VCC1 5 V, VCC2 3.3 V) ICC2 10 17 mA VCC1 at 5 V, VCC2 at 3.3 V; 25 Mbps 10
Input voltage hysteresis (VCC at 3.3 V) VI(HYS) 150 mV VCC at 3.3 V 7
Input voltage hysteresis (VCC at 5 V) VI(HYS) 150 mV VCC at 5 V 8
Input capacitance to ground (VCC at 3.3 V) CI 2 pF IN at VCC, VI = 0.4 sin(2πft), f = 2 MHz; VCC at 3.3 V 7
Input capacitance to ground (VCC at 5 V) CI 2 pF IN at VCC, VI = 0.4 sin(2πft), f = 2 MHz; VCC at 5 V 8
Junction-to-ambient thermal resistance (DW) RθJA 68.6 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 33.9 °C/W 4
Junction-to-board thermal resistance RθJB 33.5 °C/W 4
Junction-to-top characterization parameter ψJT 14.8 °C/W 4
Junction-to-board characterization parameter ψJB 32.9 °C/W 4
Device power dissipation PD 220 mW VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, D input 50% duty cycle, 25-Mbps square wave 5

CAD (KiCad official)

  • Symbol: ISO7230CDWR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: iso7230cdwr-etched.step / iso7230cdwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7230cdwr.step / iso7230cdwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 a46b1a547a7498f1, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF