Generated by kicad-footprint-generator · KiCad file format 20260206
ISO7131CCDBQR
Texas Instruments · Digital Isolators · SSOP-16-150mil
ISO7131CCDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Side-1 power supply; recommended supply range is 2.7 V to 5.5 V (absolute maximum 6 V). |
| 2 | GND1 | power_in | Side-1 ground connection for VCC1; all voltages are referenced to GND1 for side 1. |
| 3 | INA | input | Logic input for channel A (side 1), TTL thresholds, 5-V tolerant when supplied from 2.7 V or 3.3 V. |
| 4 | INB | input | Logic input for channel B (side 1), TTL thresholds, 5-V tolerant when supplied from 2.7 V or 3.3 V. |
| 5 | OUTC | output | Output for channel C (reverse-direction channel); source limited to -4 mA at VCC ≥ 3.0 V (-2 mA at VCC < 3.0 V) and sink limited to 4 mA. |
| 6 | NC | unconnected | No connect; the pin is floating with no internal connection. |
| 7 | EN1 | input | Output enable for side-1 outputs; outputs are enabled when high or disconnected and disabled when low. |
| 8 | GND1 | power_in | Side-1 ground connection for VCC1 (second GND1 pin, internally tied to the same ground). |
| 9 | GND2 | power_in | Side-2 ground connection for VCC2; all voltages are referenced to GND2 for side 2. |
| 10 | EN2 | input | Output enable for side-2 outputs; outputs are enabled when high or disconnected and disabled when low. |
| 11 | NC | unconnected | No connect; the pin is floating with no internal connection. |
| 12 | INC | input | Logic input for channel C (side 2), TTL thresholds, 5-V tolerant when supplied from 2.7 V or 3.3 V. |
| 13 | OUTB | output | Output for channel B (side 2); source limited to -4 mA at VCC ≥ 3.0 V (-2 mA at VCC < 3.0 V) and sink limited to 4 mA. |
| 14 | OUTA | output | Output for channel A (side 2); source limited to -4 mA at VCC ≥ 3.0 V (-2 mA at VCC < 3.0 V) and sink limited to 4 mA. |
| 15 | GND2 | power_in | Side-2 ground connection for VCC2 (second GND2 pin, internally tied to the same ground). |
| 16 | VCC2 | power_in | Side-2 power supply; recommended supply range is 2.7 V to 5.5 V (absolute maximum 6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC1, VCC2 | VCC1, VCC2 | -0.5 | 6 | V | 5 | ||
| Voltage on INx, ENx, OUTx | -0.5 | V | 5 | ||||
| Output current IO | IO | -15 | 15 | mA | 5 | ||
| Maximum junction temperature TJ | TJ | 150 | °C | 5 | |||
| Storage temperature Tstg | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage VCC1, VCC2 | VCC1, VCC2 | 2.7 | 5.5 | V | 5 | ||
| High-level output current (VCC ≥ 3.0 V) | IOH | -4 | mA | VCC ≥ 3.0 V | 5 | ||
| High-level output current (VCC < 3.0 V) | IOH | -2 | mA | VCC < 3.0 V | 5 | ||
| Low-level output current | IOL | 4 | mA | 5 | |||
| High-level input voltage | VIH | 2 | 5.5 | V | 5 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 5 | ||
| Input pulse duration (VCC ≥ 4.5 V) | tui | 20 | ns | VCC ≥ 4.5 V | 5 | ||
| Input pulse duration (VCC < 4.5 V) | tui | 25 | ns | VCC < 4.5 V | 5 | ||
| Signaling rate (VCC ≥ 4.5 V) | 1/tui | 0 | 50 | Mbps | VCC ≥ 4.5 V | 5 | |
| Signaling rate (VCC < 4.5 V) | 1/tui | 0 | 40 | Mbps | VCC < 4.5 V | 5 | |
| Ambient temperature TA | TA | -40 | 25 | 125 | °C | 5 | |
| Junction temperature TJ | TJ | -40 | 136 | °C | 5 | ||
| Low-level output voltage VOL | VOL | 0.2 | 0.4 | V | VCC1 and VCC2 at 5 V ±10%; IOL = 4 mA; see Figure 10 | 6 | |
| Low-level output voltage VOL | VOL | 0 | 0.1 | V | VCC1 and VCC2 at 5 V ±10%; IOL = 20 μA; see Figure 10 | 6 | |
| High-level input current IIH | IIH | 10 | μA | VCC1 and VCC2 at 5 V ±10%; VIH = VCC at INx or ENx | 6 | ||
| Low-level input current IIL | IIL | -10 | μA | VCC1 and VCC2 at 5 V ±10%; VIL = 0 V at INx or ENx | 6 | ||
| Common-mode transient immunity CMTI | CMTI | 25 | 75 | kV/μs | VCC1 and VCC2 at 5 V ±10%; VI = VCC or 0 V; see Figure 13 | 6 | |
| Common-mode transient immunity CMTI | CMTI | 25 | 50 | kV/μs | VCC1 and VCC2 at 3.3 V ±10%; VI = VCC or 0 V; see Figure 13 | 6 | |
| Low-level output voltage VOL | VOL | 0.2 | 0.4 | V | VCC1 and VCC2 at 2.7 V; IOL = 4 mA; see Figure 10 | 7 | |
| Low-level output voltage VOL | VOL | 0 | 0.1 | V | VCC1 and VCC2 at 2.7 V; IOL = 20 μA; see Figure 10 | 7 | |
| High-level input current IIH | IIH | 10 | μA | VCC1 and VCC2 at 2.7 V; VIH = VCC at INx or ENx | 7 | ||
| Low-level input current IIL | IIL | -10 | μA | VCC1 and VCC2 at 2.7 V; VIL = 0 V at INx or ENx | 7 | ||
| Common-mode transient immunity CMTI | CMTI | 25 | 50 | kV/μs | VCC1 and VCC2 at 2.7 V; VI = VCC or 0 V; see Figure 13 | 7 | |
| Propagation delay time tPLH, tPHL | tPLH, tPHL | 12 | 19 | 35 | ns | VCC1 and VCC2 at 5 V ±10%; See Figure 10 | 7 |
| Pulse width distortion /tPHL, tPLH/ | PWD | 3 | ns | VCC1 and VCC2 at 5 V ±10% | 7 | ||
| Channel-to-channel output skew time, same-direction channels | tsk(o) | 2 | ns | VCC1 and VCC2 at 5 V ±10%; same-direction channels | 7 | ||
| Channel-to-channel output skew time, opposite-direction channels | tsk(o) | 4 | ns | VCC1 and VCC2 at 5 V ±10%; opposite-direction channels | 7 | ||
| Part-to-part skew time | tsk(pp) | 12 | ns | VCC1 and VCC2 at 5 V ±10% | 7 | ||
| Output signal rise time | tr | 2 | ns | VCC1 and VCC2 at 5 V ±10%; See Figure 10 | 7 | ||
| Output signal fall time | tf | 2 | ns | VCC1 and VCC2 at 5 V ±10%; See Figure 10 | 7 | ||
| Disable propagation delay, high/low-to-high impedance output tPHZ, tPLZ | tPHZ, tPLZ | 6 | 10 | ns | VCC1 and VCC2 at 5 V ±10%; See Figure 11 | 7 | |
| Enable propagation delay, high impedance-to-high/low output tPZH, tPZL | tPZH, tPZL | 5 | 10 | ns | VCC1 and VCC2 at 5 V ±10%; See Figure 11 | 7 | |
| Fail-safe output delay time from input data or power loss tfs | tfs | 9.5 | μs | VCC1 and VCC2 at 5 V ±10%; See Figure 12 | 7 | ||
| Propagation delay time tPLH, tPHL | tPLH, tPHL | 15 | 23 | 45 | ns | VCC1 and VCC2 at 3.3 V ±10%; See Figure 10 | 8 |
| Pulse width distortion /tPHL, tPLH/ | PWD | 3 | ns | VCC1 and VCC2 at 3.3 V ±10% | 8 | ||
| Channel-to-channel output skew time, same-direction channels | tsk(o) | 2 | ns | VCC1 and VCC2 at 3.3 V ±10%; same-direction channels | 8 | ||
| Channel-to-channel output skew time, opposite-direction channels | tsk(o) | 4 | ns | VCC1 and VCC2 at 3.3 V ±10%; opposite-direction channels | 8 | ||
| Part-to-part skew time | tsk(pp) | 19 | ns | VCC1 and VCC2 at 3.3 V ±10% | 8 | ||
| Output signal rise time | tr | 2.5 | ns | VCC1 and VCC2 at 3.3 V ±10%; See Figure 10 | 8 | ||
| Output signal fall time | tf | 2.5 | ns | VCC1 and VCC2 at 3.3 V ±10%; See Figure 10 | 8 | ||
| Disable propagation delay, from high/low to high-impedance output tPHZ, tPLZ | tPHZ, tPLZ | 6.5 | 15 | ns | VCC1 and VCC2 at 3.3 V ±10%; See Figure 11 | 8 | |
| Enable propagation delay, from high-impedance to high/low output tPZH, tPZL | tPZH, tPZL | 6.5 | 15 | ns | VCC1 and VCC2 at 3.3 V ±10%; See Figure 11 | 8 | |
| Fail-safe output delay time from input data or power loss tfs | tfs | 8 | μs | VCC1 and VCC2 at 3.3 V ±10%; See Figure 12 | 8 | ||
| Propagation delay time tPLH, tPHL | tPLH, tPHL | 15 | 27 | 50 | ns | VCC1 and VCC2 at 2.7 V; See Figure 10 | 8 |
| Part-to-part skew time | tsk(pp) | 22 | ns | VCC1 and VCC2 at 2.7 V | 8 | ||
| Output signal rise time | tr | 3 | ns | VCC1 and VCC2 at 2.7 V; See Figure 10 | 8 | ||
| Output signal fall time | tf | 3 | ns | VCC1 and VCC2 at 2.7 V; See Figure 10 | 8 | ||
| Disable propagation delay, from high/low to high-impedance output tPHZ, tPLZ | tPHZ, tPLZ | 9 | 15 | ns | VCC1 and VCC2 at 2.7 V; See Figure 11 | 8 |
CAD (KiCad official)
- Symbol:
ISO7131CCDBQR - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
iso7131ccdbqr-etched.step/iso7131ccdbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7131ccdbqr.step/iso7131ccdbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
7542176b542f2b1e, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).