3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISO6742FDWR
TEXAS INSTRUMENTS · Global Sourcing Parts · SOIC-16
ISO6742FDWR from TEXAS INSTRUMENTS, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1; the absolute maximum VCC1 to GND1 is -0.5 V to 6 V. |
| 2 | GND1 | power_in | Ground connection for VCC1 (side 1); one of two side-1 ground pins, pins 2 and 8. |
| 3 | INA | input | Logic input for channel A; INx to GNDx is limited to -0.5 V to VCCX + 0.5 V, not to exceed 6 V. |
| 4 | INB | input | Logic input for channel B; INx to GNDx is limited to -0.5 V to VCCX + 0.5 V, not to exceed 6 V. |
| 5 | OUTC | output | Output for channel C (reverse-direction channel on ISO6742); OUTx to GNDx is limited to -0.5 V to VCCX + 0.5 V, and output current is limited to -15 mA to 15 mA. |
| 6 | OUTD | output | Output for channel D (reverse-direction channel on ISO6742); OUTx to GNDx is limited to -0.5 V to VCCX + 0.5 V, and output current is limited to -15 mA to 15 mA. |
| 7 | EN1 | input | Output enable 1: side-1 outputs are enabled when EN1 is high or open and are high-impedance when EN1 is low. |
| 8 | GND1 | power_in | Ground connection for VCC1 (side 1); one of two side-1 ground pins, pins 2 and 8. |
| 9 | GND2 | power_in | Ground connection for VCC2 (side 2); one of two side-2 ground pins, pins 9 and 15. |
| 10 | EN2 | input | Output enable 2: side-2 outputs are enabled when EN2 is high or open and are high-impedance when EN2 is low. |
| 11 | IND | input | Logic input for channel D (reverse-direction channel on ISO6742); INx to GNDx is limited to -0.5 V to VCCX + 0.5 V, not to exceed 6 V. |
| 12 | INC | input | Logic input for channel C (reverse-direction channel on ISO6742); INx to GNDx is limited to -0.5 V to VCCX + 0.5 V, not to exceed 6 V. |
| 13 | OUTB | output | Output for channel B; OUTx to GNDx is limited to -0.5 V to VCCX + 0.5 V, and output current is limited to -15 mA to 15 mA. |
| 14 | OUTA | output | Output for channel A; OUTx to GNDx is limited to -0.5 V to VCCX + 0.5 V, and output current is limited to -15 mA to 15 mA. |
| 15 | GND2 | power_in | Ground connection for VCC2 (side 2); one of two side-2 ground pins, pins 9 and 15. |
| 16 | VCC2 | power_in | Power supply for side 2; the absolute maximum VCC2 to GND2 is -0.5 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Package | SOIC-16 |
| Category | Global Sourcing Parts |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage side 1 (VCC1), VCC = 1.8 V | VCC1 | 1.71 | 1.89 | V | VCC = 1.8 V | 8 | |
| Supply voltage side 1 (VCC1), VCC = 2.5 V to 5 V | VCC1 | 2.25 | 5.5 | V | VCC = 2.5 V to 5 V | 8 | |
| Supply voltage side 2 (VCC2), VCC = 1.8 V | VCC2 | 1.71 | 1.89 | V | VCC = 1.8 V | 8 | |
| Supply voltage side 2 (VCC2), VCC = 2.5 V to 5 V | VCC2 | 2.25 | 5.5 | V | VCC = 2.5 V to 5 V | 8 | |
| Low level input voltage | VIL | 0 | V | 8 | |||
| High level output current, VCCO = 5 V | IOH | -4 | mA | VCCO = 5 V | 8 | ||
| High level output current, VCCO = 3.3 V | IOH | -2 | mA | VCCO = 3.3 V | 8 | ||
| High level output current, VCCO = 2.5 V | IOH | -1 | mA | VCCO = 2.5 V | 8 | ||
| High level output current, VCCO = 1.8 V | IOH | -1 | mA | VCCO = 1.8 V | 8 | ||
| Low level output current, VCCO = 5 V | IOL | 4 | mA | VCCO = 5 V | 8 | ||
| Low level output current, VCCO = 3.3 V | IOL | 2 | mA | VCCO = 3.3 V | 8 | ||
| Low level output current, VCCO = 2.5 V | IOL | 1 | mA | VCCO = 2.5 V | 8 | ||
| Low level output current, VCCO = 1.8 V | IOL | 1 | mA | VCCO = 1.8 V | 8 | ||
| Data rate | DR | 0 | 50 | Mbps | 8 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 8 | |
| Supply voltage VCC1 to GND1 | VCC1 | -0.5 | 6 | V | 7 | ||
| Supply voltage VCC2 to GND2 | VCC2 | -0.5 | 6 | V | 7 | ||
| Input voltage INx to GNDx | -0.5 | V | Maximum VCCX + 0.5 V as printed; must not exceed 6 V | 7 | |||
| Output voltage OUTx to GNDx | -0.5 | V | Maximum VCCX + 0.5 V as printed; must not exceed 6 V | 7 | |||
| Output current | Io | -15 | 15 | mA | 7 | ||
| Operating junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| High-level output voltage, IOH = -4 mA (VCCO = 5 V) | VOL | 0.4 | V | IOL = 4 mA; See Figure 8-1 | 12 | ||
| Low-level output voltage (3.3 V supply) | VOL | 0.2 | V | IOL = 2mA; See Figure 8-1 | 14 | ||
| Low-level output voltage (2.5 V supply) | VOL | 0.1 | V | IOL = 1mA; See Figure 8-1 | 16 | ||
| Low-level output voltage (1.8 V supply) | VOL | 0.1 | V | IOL = 1mA; See Figure 8-1 | 18 | ||
| High-level input current (5 V supply) | IIH | 10 | µA | VIH = VCCI at INx | 12 | ||
| Low-level input current (5 V supply) | IIL | -10 | µA | VIL = 0 V at INx | 12 | ||
| High-level input current at ENx (5 V supply) | IIH | 28 | uA | VIH = VCCI at ENx | 12 | ||
| Low-level input current at ENx (5 V supply) | IIL | -28 | uA | VIL = 0 V at ENx | 12 | ||
| Common mode transient immunity (5 V supply) | CMTI | 100 | 150 | kV/us | VI = VCC or 0 V, VCM = 1200 V; See Figure 8-4 | 12 | |
| Supply current DC signal, VI = 0 V (ISO6742 with F suffix), 5 V | ICC1, ICC2 | 2.2 | 3.3 | mA | VI = 0 V (ISO6742 with F suffix) | 13 | |
| Supply current DC signal, VI = VCCI (ISO6742 with F suffix), 5 V | ICC1, ICC2 | 4.4 | 6.3 | mA | VI = VCCI (ISO6742 with F suffix) | 13 | |
| Supply current AC signal, 1 Mbps, 5 V | ICC1, ICC2 | 3.4 | 5 | mA | All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 13 | |
| Supply current AC signal, 10 Mbps, 5 V | ICC1, ICC2 | 4.7 | 6.4 | mA | All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 13 | |
| Supply current AC signal, 50 Mbps, 5 V | ICC1, ICC2 | 10.2 | 12.5 | mA | All channels switching with square wave clock input; CL = 15 pF; 50 Mbps | 13 | |
| Supply current DC signal, VI = 0 V (ISO6742 with F suffix), 3.3 V | ICC1, ICC2 | 2.2 | 3.3 | mA | VI = 0 V (ISO6742 with F suffix) | 15 | |
| Supply current DC signal, VI = VCCI (ISO6742 with F suffix), 3.3 V | ICC1, ICC2 | 4.4 | 6.3 | mA | VI = VCCI (ISO6742 with F suffix) | 15 | |
| Supply current AC signal, 1 Mbps, 3.3 V | ICC1, ICC2 | 3.4 | 4.9 | mA | All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 15 | |
| Supply current AC signal, 10 Mbps, 3.3 V | ICC1, ICC2 | 4.2 | 5.9 | mA | All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 15 | |
| Supply current AC signal, 50 Mbps, 3.3 V | ICC1, ICC2 | 8.2 | 10.3 | mA | All channels switching with square wave clock input; CL = 15 pF; 50 Mbps | 15 | |
| Supply current DC signal, VI = 0 V (ISO6742 with F suffix), 2.5 V | ICC1, ICC2 | 2.2 | 3.3 | mA | VI = 0 V (ISO6742 with F suffix) | 17 | |
| Supply current DC signal, VI = VCCI (ISO6742 with F suffix), 2.5 V | ICC1, ICC2 | 4.3 | 6.3 | mA | VI = VCCI (ISO6742 with F suffix) | 17 | |
| Supply current AC signal, 1 Mbps, 2.5 V | ICC1, ICC2 | 3.3 | 4.8 | mA | All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 17 | |
| Supply current AC signal, 10 Mbps, 2.5 V | ICC1, ICC2 | 4 | 5.6 | mA | All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 17 | |
| Supply current AC signal, 50 Mbps, 2.5 V | ICC1, ICC2 | 7 | 9 | mA | All channels switching with square wave clock input; CL = 15 pF; 50 Mbps | 17 | |
| Supply current DC signal, VI = 0 V (ISO6742 with F suffix), 1.8 V | ICC1, ICC2 | 1.9 | 3.1 | mA | VI = 0 V (ISO6742 with F suffix) | 19 | |
| Supply current DC signal, VI = VCCI (ISO6742 with F suffix), 1.8 V | ICC1, ICC2 | 4 | 6.1 | mA | VI = VCCI (ISO6742 with F suffix) | 19 | |
| Supply current AC signal, 1 Mbps, 1.8 V | ICC1, ICC2 | 3 | 4.7 | mA | All channels switching with square wave clock input; CL = 15 pF; 1 Mbps | 19 | |
| Supply current AC signal, 10 Mbps, 1.8 V | ICC1, ICC2 | 3.5 | 5.2 | mA | All channels switching with square wave clock input; CL = 15 pF; 10 Mbps | 19 | |
| Supply current AC signal, 50 Mbps, 1.8 V | ICC1, ICC2 | 5.6 | 7.6 | mA | All channels switching with square wave clock input; CL = 15 pF; 50 Mbps | 19 | |
| Junction-to-ambient thermal resistance | RθJA | 73 | °C/W | 9 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 36.1 | °C/W | 9 | |||
| Junction-to-board thermal resistance | RθJB | 40.4 | °C/W | 9 |
CAD (KiCad official)
- Symbol:
ISO6742FDWR - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
iso6742fdwr-etched.step/iso6742fdwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso6742fdwr.step/iso6742fdwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TEXAS INSTRUMENTS datasheet (48 pp, sha256
18282cc8e701676e, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).