main
Ray
Publish 0.1.0
37dd153
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291
{
"slug": "iso5852sqdwrq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Gate Drive ICs, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"iso5852sqdwrq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"iso5852sqdwrq1.kicad_sym",
"iso5852sqdwrq1.kicad_mod",
"iso5852sqdwrq1.glb",
"iso5852sqdwrq1.step",
"iso5852sqdwrq1.lbr",
"docs/hero.png",
"docs/iso5852sqdwrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"iso5852sqdwrq1-hero.glb",
"iso5852sqdwrq1-hero.overlay.json",
"iso5852sqdwrq1-etched.glb"
],
"component": {
"mpn": "ISO5852SQDWRQ1",
"manufacturer": "Texas Instruments",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "Power Supply Chip",
"subcategory": "Gate Drive ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/iso5852s-q1.pdf",
"parts": {
"symbol": "iso5852sqdwrq1.kicad_sym",
"footprint": "iso5852sqdwrq1.kicad_mod",
"model_3d": "iso5852sqdwrq1-hero.glb",
"model_3d_plain": "iso5852sqdwrq1-etched.glb",
"model_3d_step": "iso5852sqdwrq1-etched.step",
"model_3d_step_plain": "iso5852sqdwrq1.step",
"lbr": "iso5852sqdwrq1.lbr"
},
"distributor_links": {
"lcsc": "C2865194",
"digikey": "296-ISO5852SQDWRQ1TR-ND",
"mouser": "595-ISO5852SQDWRQ1"
},
"distributor_check": {
"checked_at": "2026-11-11T03:06:16Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-ISO5852SQDWRQ1TR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-ISO5852SQDWRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VEE2",
"type": "power_in",
"description": "Output negative supply; connect to GND2 for unipolar supply application."
},
{
"number": "2",
"name": "DESAT",
"type": "input",
"description": "Desaturation voltage input for IGBT collector-emitter overcurrent detection, referenced to GND2."
},
{
"number": "3",
"name": "GND2",
"type": "power_in",
"description": "Gate drive common; connect to IGBT emitter."
},
{
"number": "4",
"name": "OUTH",
"type": "output",
"description": "Positive gate drive voltage output (2.5-A peak source)."
},
{
"number": "5",
"name": "VCC2",
"type": "power_in",
"description": "Most positive output supply potential, 15 V to 30 V with respect to GND2."
},
{
"number": "6",
"name": "OUTL",
"type": "output",
"description": "Negative gate drive voltage output (5-A peak sink)."
},
{
"number": "7",
"name": "CLAMP",
"type": "output",
"description": "Miller clamp output, used to sink Miller current from the IGBT gate when the gate is turned off in unipolar operation."
},
{
"number": "8",
"name": "VEE2",
"type": "power_in",
"description": "Output negative supply; connect to GND2 for unipolar supply application."
},
{
"number": "9",
"name": "GND1",
"type": "power_in",
"description": "Input ground."
},
{
"number": "10",
"name": "IN+",
"type": "input",
"description": "Non-inverting gate drive voltage control input, CMOS compatible with thresholds referenced to VCC1."
},
{
"number": "11",
"name": "IN-",
"type": "input",
"description": "Inverting gate drive voltage control input, CMOS compatible with thresholds referenced to VCC1."
},
{
"number": "12",
"name": "RDY",
"type": "output",
"description": "Power-good output, high when both input-side and output-side supplies are good; open-drain with internal 50-kΩ pullup."
},
{
"number": "13",
"name": "FLT",
"type": "output",
"description": "Fault output, active low during DESAT condition; latched until reset through RST after RDY goes high."
},
{
"number": "14",
"name": "RST",
"type": "input",
"description": "Reset input; apply a low pulse of at least 800 ns to reset the fault latch."
},
{
"number": "15",
"name": "VCC1",
"type": "power_in",
"description": "Positive input supply, 2.25 V to 5.5 V."
},
{
"number": "16",
"name": "GND1",
"type": "power_in",
"description": "Input ground."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet prints the inverting input as 'IN–' (en dash) in the pin table; it is recorded here as; Pins 1 and 8 are both VEE2 and pins 9 and 16 are both GND1, as printed in the page 3 pinout; these a"
],
"pages_sent": 40,
"cost_usd": 0.178,
"at": "2026-11-11T03:05:50"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/iso5852s-q1.pdf",
"pages": 40,
"sha256": "318e69c0fd223ff4",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "iso5852sqdwrq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "iso5852sqdwrq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e7009810d7542df41a21fbafcf7913132b2bf546734b52693f02b4a0589e722f",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DW0016B",
"source_page": 33,
"D": {
"nom_mm": 10.3,
"range_mm": [
10.1,
10.5
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
7.4,
7.6
]
},
"E": {
"nom_mm": 10.3,
"range_mm": [
9.97,
10.63
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.65,
"range_mm": [
null,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "iso5852sqdwrq1.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}