main
Ray
iso3082dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
13df42e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256
{
"schema_version": 1,
"type": "component",
"slug": "iso3082dwr",
"title": "ISO3082DWR",
"brief": "Texas Instruments RS-485 / RS-422 ICs, SOIC-16-300mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"iso3082dwr"
],
"component": {
"mpn": "ISO3082DWR",
"manufacturer": "Texas Instruments",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "Interface",
"subcategory": "RS-485 / RS-422 ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/iso3082dwr.pdf",
"parts": {
"symbol": "iso3082dwr.kicad_sym",
"footprint": "iso3082dwr.kicad_mod",
"model_3d": "iso3082dwr-etched.glb",
"model_3d_plain": "iso3082dwr.glb",
"model_3d_step": "iso3082dwr-etched.step",
"model_3d_step_plain": "iso3082dwr.step",
"lbr": "iso3082dwr.lbr"
},
"distributor_links": {
"digikey": "296-37891-2-ND",
"lcsc": "C21710"
},
"pins": [
{
"number": "1",
"name": "VCC1",
"type": "power_in",
"description": "Logic-side supply. 3.15 V to 5.5 V (5 V nominal for 5-V operation, 3.15-3.6 V for 3.3-V operation). Decouple with a low-ESR bypass capacitor to GND1."
},
{
"number": "2",
"name": "GND1",
"type": "power_in",
"description": "Logic-side ground reference. Return for VCC1 and the D/DE/RE/R logic signals. Galvanically isolated from GND2."
},
{
"number": "3",
"name": "R",
"type": "output",
"description": "Receiver output on the logic side. Logic-level output of the differential receiver comparing bus lines A and B; VOH ≈ VCC1 - 0.4 V typ, VOL ≈ 0.15 V typ. High-impedance when RE is high."
},
{
"number": "4",
"name": "RE",
"type": "input",
"description": "Receiver enable, active low. Drive low to enable the receiver output R; drive high to place R in high-impedance. 3.3-V/5-V logic-level input; 5-V tolerant."
},
{
"number": "5",
"name": "DE",
"type": "input",
"description": "Driver enable, active high. Drive high to enable the differential bus driver onto A/B; drive low to place bus outputs in high-impedance. 3.3-V/5-V logic-level input."
},
{
"number": "6",
"name": "D",
"type": "input",
"description": "Driver input on the logic side. Logic-level input that determines the polarity of the differential driver on A/B when DE is asserted. VIH ≥ 2 V, VIL ≤ 0.8 V."
},
{
"number": "7",
"name": "GND1",
"type": "power_in",
"description": "Logic-side ground (tied to pin 2). Multiple GND1 pins improve return-path integrity for the isolated logic side."
},
{
"number": "8",
"name": "GND1",
"type": "power_in",
"description": "Logic-side ground (tied to pin 2). Multiple GND1 pins improve return-path integrity for the isolated logic side."
},
{
"number": "9",
"name": "GND2",
"type": "power_in",
"description": "Bus-side ground. Return for VCC2 and the RS-485 bus terminals A/B. Galvanically isolated from GND1."
},
{
"number": "10",
"name": "GND2",
"type": "power_in",
"description": "Bus-side ground (tied to pin 9). Multiple GND2 pins improve return-path integrity for the isolated bus side."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. On the ISO3082/ISO3088 half-duplex variants this pin is unused (corresponds to the Y driver output on the full-duplex ISO3080/86)."
},
{
"number": "12",
"name": "A",
"type": "bidirectional",
"description": "Non-inverting RS-485 bus I/O. Driver output when DE is high, receiver non-inverting input otherwise. Tolerates -7 V to +12 V bus common-mode; ±12 kV HBM ESD to GND2."
},
{
"number": "13",
"name": "B",
"type": "bidirectional",
"description": "Inverting RS-485 bus I/O. Driver output when DE is high, receiver inverting input otherwise. Tolerates -7 V to +12 V bus common-mode; ±12 kV HBM ESD to GND2."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. On the ISO3082/ISO3088 half-duplex variants this pin is unused (corresponds to the Z driver output on the full-duplex ISO3080/86)."
},
{
"number": "15",
"name": "GND2",
"type": "power_in",
"description": "Bus-side ground (tied to pin 9). Multiple GND2 pins improve return-path integrity for the isolated bus side."
},
{
"number": "16",
"name": "VCC2",
"type": "power_in",
"description": "Bus-side supply. 4.5 V to 5.5 V (5 V nominal). Powers the isolated bus-side transceiver; decouple with a low-ESR bypass capacitor to GND2."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/iso3082dwr.pdf",
"pages": 20,
"sha256": "5409d7f5b945e3a3",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"pin1": {
"pad": "1",
"at": [
-2.475,
-4.445
],
"corner": "top-left",
"source": "silk-marker",
"derived_from": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c",
"mark": "drawn"
},
"models_3d": [
{
"file": "iso3082dwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "iso3082dwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "6e1ed9457d033f9adf7d9c109036e59dad027323c312c0781226a1ac5a87eb98",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "SOIC-16-300mil",
"Category": "Interface",
"Pins": "16"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"iso3082dwr"
],
"discovery_pitch": "ISO3082DWR (Texas Instruments) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"iso3082dwr.kicad_sym",
"iso3082dwr.kicad_mod",
"iso3082dwr.glb",
"iso3082dwr.step",
"iso3082dwr-etched.step",
"iso3082dwr.lbr",
"docs/hero.png",
"docs/iso3082dwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "ISO3082DWR",
"kind": "packaging"
}
],
"updated_at": "2026-09-24T23:03:04.211Z"
}