main
Ray
iso3080dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
267d800
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215
{
"slug": "iso3080dwr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS-485 / RS-422 ICs, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"iso3080dwr"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"iso3080dwr.kicad_sym",
"iso3080dwr.kicad_mod",
"iso3080dwr.glb",
"iso3080dwr.step",
"iso3080dwr.lbr",
"docs/hero.png",
"docs/iso3080dwr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"iso3080dwr-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "ISO3080DWR",
"manufacturer": "Texas Instruments",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "RS-485 / RS-422 ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/iso3080dwr.pdf",
"parts": {
"symbol": "iso3080dwr.kicad_sym",
"footprint": "iso3080dwr.kicad_mod",
"model_3d": "iso3080dwr-etched.glb",
"model_3d_plain": "iso3080dwr.glb",
"model_3d_step": "iso3080dwr-etched.step",
"model_3d_step_plain": "iso3080dwr.step",
"lbr": "iso3080dwr.lbr"
},
"pins": [
{
"number": "1",
"name": "VCC1",
"type": "power_in",
"description": "Logic-side supply voltage. 3.15-3.6 V for 3.3-V operation or 4.5-5.5 V for 5-V operation. Bypass to GND1 with a low-ESR ceramic capacitor close to the pin."
},
{
"number": "2",
"name": "GND1",
"type": "power_in",
"description": "Logic-side (VCC1) ground reference. Isolated from the bus-side ground GND2 by the internal isolation barrier."
},
{
"number": "3",
"name": "R",
"type": "output",
"description": "Receiver output on the logic side. Driven high when A-B > +200 mV, low when A-B < -200 mV, and held high by the fail-safe receiver when the bus is open, shorted, or idle. Referenced to VCC1/GND1."
},
{
"number": "4",
"name": "RE",
"type": "input",
"description": "Receiver enable, active LOW. Drive low to enable the receiver output R; drive high to place R in high-impedance. 3.3-V compatible input that is also 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V."
},
{
"number": "5",
"name": "DE",
"type": "input",
"description": "Driver enable, active HIGH. Drive high to enable the differential driver outputs Y/Z; drive low to place them in high-impedance. 3.3-V compatible input, 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V."
},
{
"number": "6",
"name": "D",
"type": "input",
"description": "Driver data input on the logic side. Logic high produces Y high / Z low; logic low produces Y low / Z high (when DE is high). 3.3-V compatible, 5-V tolerant, VIH >= 2 V, VIL <= 0.8 V."
},
{
"number": "7",
"name": "GND1",
"type": "power_in",
"description": "Logic-side ground. Tie to pin 2 GND1 externally. Multiple GND1 pins provide low-inductance return for the logic-side supply and improve isolation-barrier common-mode performance."
},
{
"number": "8",
"name": "GND1",
"type": "power_in",
"description": "Logic-side ground. Tie to pin 2 GND1 externally. Multiple GND1 pins provide low-inductance return for the logic-side supply and improve isolation-barrier common-mode performance."
},
{
"number": "9",
"name": "GND2",
"type": "power_in",
"description": "Bus-side ground. Tie to pin 10 and pin 15 GND2 externally. Isolated from GND1 by the internal barrier; provides the return for the RS-485 bus driver."
},
{
"number": "10",
"name": "GND2",
"type": "power_in",
"description": "Bus-side ground. Tie to pin 9 and pin 15 GND2 externally. Isolated from GND1 by the internal barrier."
},
{
"number": "11",
"name": "Y",
"type": "output",
"description": "Non-inverting differential driver output (RS-485 bus). Drives high when D=1 with DE=1, driving the far end high with respect to Z. VOD >= 1.5 V into 54 Ohm; VOC ~2.6 V typ. Withstands -7 V to +12 V bus common-mode range."
},
{
"number": "12",
"name": "Z",
"type": "output",
"description": "Inverting differential driver output (RS-485 bus). Complementary to Y. Driver output current is limited (+/-60 mA) and the pin tolerates -9 V to +14 V absolute and -7 V to +12 V operating common-mode."
},
{
"number": "13",
"name": "B",
"type": "input",
"description": "Inverting receiver differential input (RS-485 bus). Together with A senses the received differential signal; receiver output R goes low when A-B < -200 mV. Presents 1/8 unit load (>=96 kOhm), allowing up to 256 nodes on one bus."
},
{
"number": "14",
"name": "A",
"type": "input",
"description": "Non-inverting receiver differential input (RS-485 bus). Receiver output R goes high when A-B > +200 mV; fail-safe biasing forces R high when the bus is open, shorted, or idle. -7 V to +12 V common-mode."
},
{
"number": "15",
"name": "GND2",
"type": "power_in",
"description": "Bus-side ground. Tie to pins 9 and 10 GND2 externally. Provides the return for VCC2 and the RS-485 bus driver."
},
{
"number": "16",
"name": "VCC2",
"type": "power_in",
"description": "Bus-side supply voltage, 4.5-5.5 V. Powers the isolated RS-485 driver/receiver. Bypass to GND2 with a low-ESR ceramic capacitor close to the pin."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C20624",
"digikey": "296-41272-2-ND",
"mouser": "595-ISO3080DWR"
},
"distributor_check": {
"checked_at": "2026-10-05T19:02:01Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "296-41272-2-ND",
"status": "found"
},
"mouser": {
"pn": "595-ISO3080DWR",
"status": "found"
}
},
"models_3d": [
{
"file": "iso3080dwr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "iso3080dwr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "1facde7f2b12cf4ee3495a9f55153c9448c9517802f4025e1746417dd108fc2a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}