← Commit history

Initial commit: component/iso1450bdwr

Ray ·9d9ea69f2b ·
2 files changed +242
README.mdadded+53
@@ -0,0 +1,53 @@+# ISO1450BDWR++**Texas Instruments** · Isolated RS-485/422 Transceivers · SOIC-16-300mil++ISO1450BDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC1 | power_in | Logic side power supply; operating voltage range 1.71V to 5.5V depending on application (1.8V, 2.5V, 3.3V, or 5V operation) |+| 2 | GND1 | power_in | Logic side ground connection for VCC1; both pins 2 and 8 must be connected to GND1 |+| 3 | R | output | Receiver output; generates logic high when differential bus input (A-B) exceeds positive threshold VTH+ (-10mV typical) or logic low when below negative threshold VTH- (-130mV typical) |+| 4 | RE | input | Receiver enable input, active low; receiver output disabled (high impedance) when high or open, enabled when low |+| 5 | DE | input | Driver enable input, active high; driver outputs enabled when high, disabled (high impedance state) when low or open |+| 6 | D | input | Driver data input; controls state of differential bus outputs when driver is enabled (high D produces A high and B low) |+| 7 | NC | unconnected | No internal connection; connection to power supply or ground does not affect device operation |+| 8 | GND1 | power_in | Logic side ground connection for VCC1; both pins 2 and 8 must be connected to GND1 |+| 9 | GND2 | power_in | Bus side ground connection for VCC2; both pins 9 and 15 must be connected to GND2 |+| 10 | NC | unconnected | No internal connection; connection to power supply or ground does not affect device operation |+| 11 | NC | unconnected | No internal connection; connection to power supply or ground does not affect device operation |+| 12 | A | bidirectional | Bus non-inverted data line, bidirectional I/O; driven to follow D input state when driver enabled (DE=VCC1), receives differential bus voltage when receiver enabled (RE=GND1) |+| 13 | B | bidirectional | Bus inverted data line, bidirectional I/O; driven to inverted D input state when driver enabled (DE=VCC1), receives differential bus voltage when receiver enabled (RE=GND1) |+| 14 | NC | unconnected | No internal connection; connection to power supply or ground does not affect device operation |+| 15 | GND2 | power_in | Bus side ground connection for VCC2; both pins 9 and 15 must be connected to GND2 |+| 16 | VCC2 | power_in | Bus side supply voltage for RS-485 interface; operating voltage range 3V to 5.5V, requires 10µF bulk capacitor for optimal transceiver performance |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Signal Isolation Devices |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `ISO1450BDWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `iso1450bdwr-etched.step` / `iso1450bdwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso1450bdwr.step` / `iso1450bdwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/iso1410) (48 pp, sha256 `ee0c34ba1cd8865f`, retrieved 2026-09-18, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/iso1450bdwr-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "iso1450bdwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Isolated RS-485/422 Transceivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "signal isolation devices",+    "iso1450bdwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "iso1450bdwr.kicad_sym",+    "iso1450bdwr.kicad_mod",+    "iso1450bdwr.glb",+    "iso1450bdwr.step",+    "iso1450bdwr.lbr",+    "docs/hero.png",+    "docs/iso1450bdwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ISO1450BDWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16-300mil",+    "pin_count": 16,+    "category": "Signal Isolation Devices",+    "subcategory": "Isolated RS-485/422 Transceivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/iso1410",+    "parts": {+      "symbol": "iso1450bdwr.kicad_sym",+      "footprint": "iso1450bdwr.kicad_mod",+      "model_3d": "iso1450bdwr-etched.glb",+      "model_3d_plain": "iso1450bdwr.glb",+      "model_3d_step": "iso1450bdwr-etched.step",+      "model_3d_step_plain": "iso1450bdwr.step",+      "lbr": "iso1450bdwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2672364"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC1",+        "type": "power_in",+        "description": "Logic side power supply; operating voltage range 1.71V to 5.5V depending on application (1.8V, 2.5V, 3.3V, or 5V operation)"+      },+      {+        "number": "2",+        "name": "GND1",+        "type": "power_in",+        "description": "Logic side ground connection for VCC1; both pins 2 and 8 must be connected to GND1"+      },+      {+        "number": "3",+        "name": "R",+        "type": "output",+        "description": "Receiver output; generates logic high when differential bus input (A-B) exceeds positive threshold VTH+ (-10mV typical) or logic low when below negative threshold VTH- (-130mV typical)"+      },+      {+        "number": "4",+        "name": "RE",+        "type": "input",+        "description": "Receiver enable input, active low; receiver output disabled (high impedance) when high or open, enabled when low"+      },+      {+        "number": "5",+        "name": "DE",+        "type": "input",+        "description": "Driver enable input, active high; driver outputs enabled when high, disabled (high impedance state) when low or open"+      },+      {+        "number": "6",+        "name": "D",+        "type": "input",+        "description": "Driver data input; controls state of differential bus outputs when driver is enabled (high D produces A high and B low)"+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; connection to power supply or ground does not affect device operation"+      },+      {+        "number": "8",+        "name": "GND1",+        "type": "power_in",+        "description": "Logic side ground connection for VCC1; both pins 2 and 8 must be connected to GND1"+      },+      {+        "number": "9",+        "name": "GND2",+        "type": "power_in",+        "description": "Bus side ground connection for VCC2; both pins 9 and 15 must be connected to GND2"+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; connection to power supply or ground does not affect device operation"+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; connection to power supply or ground does not affect device operation"+      },+      {+        "number": "12",+        "name": "A",+        "type": "bidirectional",+        "description": "Bus non-inverted data line, bidirectional I/O; driven to follow D input state when driver enabled (DE=VCC1), receives differential bus voltage when receiver enabled (RE=GND1)"+      },+      {+        "number": "13",+        "name": "B",+        "type": "bidirectional",+        "description": "Bus inverted data line, bidirectional I/O; driven to inverted D input state when driver enabled (DE=VCC1), receives differential bus voltage when receiver enabled (RE=GND1)"+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; connection to power supply or ground does not affect device operation"+      },+      {+        "number": "15",+        "name": "GND2",+        "type": "power_in",+        "description": "Bus side ground connection for VCC2; both pins 9 and 15 must be connected to GND2"+      },+      {+        "number": "16",+        "name": "VCC2",+        "type": "power_in",+        "description": "Bus side supply voltage for RS-485 interface; operating voltage range 3V to 5.5V, requires 10µF bulk capacitor for optimal transceiver performance"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 48,+        "cost_usd": 0.4948,+        "at": "2026-09-18T00:34:35"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/iso1410",+        "pages": 48,+        "sha256": "ee0c34ba1cd8865f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file