← Commit history

Initial commit: component/iso1410dwr

Ray ·be637f5c39 ·
2 files changed +98
README.mdadded+64
@@ -0,0 +1,64 @@+# ISO1410DWR++**Texas Instruments** · Isolated RS-485/422 Transceivers · SOIC-16-300mil++ISO1410DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC1 | power_in | Logic-side supply. Operating range 1.71 V to 5.5 V. Local bypass capacitor to GND1 required. |+| 2 | GND1 | power_in | Logic-side ground reference for VCC1. Pins 2 and 8 must both be tied to GND1. |+| 3 | R | output | Receiver output. Drives logic-level data recovered from the isolated RS-485 bus (A/B) to the MCU. |+| 4 | RE | input | Receiver enable, active-low. Receiver output is enabled when RE is low; disabled (high-Z on R) when RE is high or left open. |+| 5 | DE | input | Driver enable, active-high. Driver outputs on the bus (A/B) are enabled when DE is high; disabled when DE is low or open. |+| 6 | D | input | Driver input. Logic-side data to be transmitted onto the isolated RS-485 bus when DE is asserted. |+| 7 | NC | unconnected | No internal connection. May be tied to any supply or ground on the PCB without affecting device operation. |+| 8 | GND1 | power_in | Logic-side ground reference for VCC1. Both pin 2 and pin 8 must be connected to GND1. |+| 9 | GND2 | power_in | Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2. |+| 10 | NC | unconnected | No internal connection. May be left floating or tied to PCB supply/ground without affecting operation. |+| 11 | NC | unconnected | No internal connection on the half-duplex ISO1410 variant. (This position is used for the Y driver output on the full-duplex ISO1412.) |+| 12 | A | bidirectional | Non-inverting RS-485 bus I/O. Acts as driver output when DE=1 and as receiver non-inverting input when RE=0. Absolute-max bus voltage ±18 V relative to GND2; ±16 kV IEC 61000-4-2 contact ESD rated. |+| 13 | B | bidirectional | Inverting RS-485 bus I/O. Acts as driver complementary output when DE=1 and as receiver inverting input when RE=0. Absolute-max bus voltage ±18 V relative to GND2; ±16 kV IEC 61000-4-2 contact ESD rated. |+| 14 | NC | unconnected | No internal connection on the half-duplex ISO1410 variant. (This position is used for the A input on the full-duplex ISO1412.) |+| 15 | GND2 | power_in | Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2. |+| 16 | VCC2 | power_in | Bus-side (isolated) supply for the RS-485 transceiver. Operating range 3 V to 5.5 V. Local bypass capacitor to GND2 required. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Signal Isolation Devices |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `ISO1410DWR`+- `ISO1412DW`+- `ISO1412DWR`+- `ISO1430DW`+- `ISO1430DWR`+- `ISO1450DW`+- `ISO1450DWR`++## CAD (KiCad official)++- Symbol: `ISO1410DWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/iso1410) (48 pp, sha256 `ee0c34ba1cd8865f`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/iso1410dwr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "iso1410dwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Isolated RS-485/422 Transceivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "signal isolation devices",+    "iso1410dwr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "iso1410dwr.kicad_sym",+    "iso1410dwr.kicad_mod",+    "iso1410dwr.glb",+    "iso1410dwr.step",+    "iso1410dwr.lbr",+    "docs/hero.png",+    "docs/iso1410dwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file