← Commit history
page.json+194−8@@ -1,13 +1,204 @@ {+ "schema_version": 1,+ "type": "component", "slug": "iso1410dwr",+ "title": "ISO1410DWR",+ "brief": "Texas Instruments Isolated RS-485/422 Transceivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments Isolated RS-485/422 Transceivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "signal isolation devices", "iso1410dwr" ],+ "component": {+ "mpn": "ISO1410DWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Signal Isolation Devices",+ "subcategory": "Isolated RS-485/422 Transceivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/iso1410",+ "parts": {+ "symbol": "iso1410dwr.kicad_sym",+ "footprint": "iso1410dwr.kicad_mod",+ "model_3d": "iso1410dwr.glb",+ "model_3d_step": "iso1410dwr.step",+ "lbr": "iso1410dwr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VCC1",+ "type": "power_in",+ "description": "Logic-side supply. Operating range 1.71 V to 5.5 V. Local bypass capacitor to GND1 required."+ },+ {+ "number": "2",+ "name": "GND1",+ "type": "power_in",+ "description": "Logic-side ground reference for VCC1. Pins 2 and 8 must both be tied to GND1."+ },+ {+ "number": "3",+ "name": "R",+ "type": "output",+ "description": "Receiver output. Drives logic-level data recovered from the isolated RS-485 bus (A/B) to the MCU."+ },+ {+ "number": "4",+ "name": "RE",+ "type": "input",+ "description": "Receiver enable, active-low. Receiver output is enabled when RE is low; disabled (high-Z on R) when RE is high or left open."+ },+ {+ "number": "5",+ "name": "DE",+ "type": "input",+ "description": "Driver enable, active-high. Driver outputs on the bus (A/B) are enabled when DE is high; disabled when DE is low or open."+ },+ {+ "number": "6",+ "name": "D",+ "type": "input",+ "description": "Driver input. Logic-side data to be transmitted onto the isolated RS-485 bus when DE is asserted."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. May be tied to any supply or ground on the PCB without affecting device operation."+ },+ {+ "number": "8",+ "name": "GND1",+ "type": "power_in",+ "description": "Logic-side ground reference for VCC1. Both pin 2 and pin 8 must be connected to GND1."+ },+ {+ "number": "9",+ "name": "GND2",+ "type": "power_in",+ "description": "Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. May be left floating or tied to PCB supply/ground without affecting operation."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection on the half-duplex ISO1410 variant. (This position is used for the Y driver output on the full-duplex ISO1412.)"+ },+ {+ "number": "12",+ "name": "A",+ "type": "bidirectional",+ "description": "Non-inverting RS-485 bus I/O. Acts as driver output when DE=1 and as receiver non-inverting input when RE=0. Absolute-max bus voltage \u00b118 V relative to GND2; \u00b116 kV IEC 61000-4-2 contact ESD rated."+ },+ {+ "number": "13",+ "name": "B",+ "type": "bidirectional",+ "description": "Inverting RS-485 bus I/O. Acts as driver complementary output when DE=1 and as receiver inverting input when RE=0. Absolute-max bus voltage \u00b118 V relative to GND2; \u00b116 kV IEC 61000-4-2 contact ESD rated."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection on the half-duplex ISO1410 variant. (This position is used for the A input on the full-duplex ISO1412.)"+ },+ {+ "number": "15",+ "name": "GND2",+ "type": "power_in",+ "description": "Bus-side ground reference for VCC2. Both pin 9 and pin 15 must be connected to GND2."+ },+ {+ "number": "16",+ "name": "VCC2",+ "type": "power_in",+ "description": "Bus-side (isolated) supply for the RS-485 transceiver. Operating range 3 V to 5.5 V. Local bypass capacitor to GND2 required."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/iso1410",+ "pages": 48,+ "sha256": "ee0c34ba1cd8865f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-16-300mil",+ "Category": "Signal Isolation Devices",+ "Pins": "16"+ }+ },+ "variants": [+ {+ "mpn": "ISO1410DWR",+ "kind": "packaging"+ },+ {+ "mpn": "ISO1412DW",+ "kind": "unknown"+ },+ {+ "mpn": "ISO1412DWR",+ "kind": "unknown"+ },+ {+ "mpn": "ISO1430DW",+ "kind": "unknown"+ },+ {+ "mpn": "ISO1430DWR",+ "kind": "unknown"+ },+ {+ "mpn": "ISO1450DW",+ "kind": "unknown"+ },+ {+ "mpn": "ISO1450DWR",+ "kind": "unknown"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "iso1410dwr"+ ],+ "discovery_pitch": "ISO1410DWR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +216,5 @@ "docs/iso1410dwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }