main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs iso1211dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iso1211dr: viewers · Ray
iso1211dr-etched.fit.json iso1211dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1211dr-etched.glb iso1211dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1211dr-etched.step iso1211dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1211dr.glb Publish 0.1.0 · Ray
iso1211dr.kicad_mod Publish 0.1.0 · Ray
iso1211dr.kicad_sym Publish 0.1.0 · Ray
iso1211dr.lbr Publish 0.1.0 · Ray
iso1211dr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json iso1211dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md iso1211dr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ISO1211DR

Texas Instruments · Interface - Specialized · SOIC-8

ISO1211DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Power supply, side 1 (logic/controller side). Recommended operating range 2.25V to 5.5V; absolute maximum 6V.
2 EN input Output enable (side 1). OUT is enabled when EN is high or open; OUT enters high-impedance state when EN is low. In noisy applications tie EN to VCC1.
3 OUT output Channel output (side 1). Push-pull digital output referenced to VCC1/GND1. Recommended IOH = -4/-3/-2 mA and IOL = 4/3/2 mA at VCC1 = 5V/3.3V/2.5V.
4 GND1 power_in Ground connection for VCC1 (logic/controller side).
5 SUB passive Internal connection to the input-chip substrate (field side). For good thermal performance connect to a small 2mm x 2mm floating copper plane. Do NOT connect to FGND or any other signal or plane.
6 FGND power_in Field-side ground return for the isolated input.
7 IN input Field-side current input. Absolute maximum ±60V; recommended operating range ±60V. Sinks/sources the sensed input current defined by external RTHR/RSENSE network.
8 SENSE input Field-side voltage sense input. Absolute maximum ±60V; minimum pulse width 150ns. Used with external RSENSE to set the input current limit.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Comm/UART
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ISO1211DR
  • ISO1212DBQ
  • ISO1212DBQR

CAD (KiCad official)

  • Symbol: ISO1211DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: iso1211dr-etched.step / iso1211dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso1211dr.step / iso1211dr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
iso1211dr.step 122 KB You want the bare part, or you mark your own boards.
iso1211dr-etched.step 1.8 MB You want the part with ISO1211DR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 455 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 41e0bc7308dd4e0c, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF