main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs iso1176dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iso1176dwr: viewers · Ray
iso1176dwr-etched.fit.json iso1176dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1176dwr-etched.glb iso1176dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1176dwr-etched.step iso1176dwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iso1176dwr.glb Publish 0.1.0 · Ray
iso1176dwr.kicad_mod Publish 0.1.0 · Ray
iso1176dwr.kicad_sym Publish 0.1.0 · Ray
iso1176dwr.lbr Publish 0.1.0 · Ray
iso1176dwr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json iso1176dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md iso1176dwr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ISO1176DWR

Texas Instruments · Isolated RS-485/422 Transceivers · SOIC-16-300mil

ISO1176DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Logic-side power supply. Recommended 3.15 V to 5.5 V referenced to GND1.
2 GND1 power_in Logic-side ground. Internally connected to pin 8.
3 R output Receiver output. Logic-level output reflecting the state of the differential bus (A/B).
4 RE input Receiver logic-low enable (active low). Drive low to enable the receiver output R.
5 DE input Driver logic-high enable. Drive high to enable the differential bus driver (A/B).
6 D input Driver logic input. Digital input whose state is transmitted differentially on A/B when the driver is enabled.
7 PV input Chip enable (power-valid). Logic high applied immediately after power up enables device operation; logic low 3-states all outputs.
8 GND1 power_in Logic-side ground. Internally connected to pin 2.
9 GND2 power_in Bus-side ground. Internally connected to pin 15.
10 ISODE output Bus-side (isolated) driver enable output. Mirrors the DE state across the isolation barrier, useful for controlling external bus-side circuitry.
11 NC unconnected Not connected internally; may be left floating.
12 A bidirectional Noninverting differential bus I/O (RS-485/PROFIBUS A line). Operates over -7 V to +12 V common-mode range.
13 B bidirectional Inverting differential bus I/O (RS-485/PROFIBUS B line). Operates over -7 V to +12 V common-mode range.
14 NC unconnected Not connected internally; may be left floating.
15 GND2 power_in Bus-side ground. Internally connected to pin 9.
16 VCC2 power_in Bus-side power supply. Recommended 4.75 V to 5.25 V referenced to GND2.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Signal Isolation Devices
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • ISO1176DWR

CAD (KiCad official)

  • Symbol: ISO1176DWR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: iso1176dwr-etched.step / iso1176dwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso1176dwr.step / iso1176dwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 a3a0d37a1070db5e, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF