main
Ray
Publish 0.1.0
c7f30dd
ISL8844AABZ-T
RENESAS · AC-DC Controllers & Regulators · SOIC-8
ISL8844AABZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input, with the loop compensation network connected between COMP and FB. |
| 2 | FB | input | Output voltage feedback to the inverting input of the error amplifier, whose non-inverting input is tied internally to a 2.5V reference. |
| 3 | CS | input | Current sense input to the PWM comparator, nominally 0V to 1.0V with an internal offset of 100mV. |
| 4 | RTCT | passive | Oscillator timing pin where RT from VREF and CT to GND set the switching frequency (up to 2.0MHz) and maximum duty cycle. |
| 5 | GND | power_in | Power and small signal reference ground for all functions. |
| 6 | OUT | output | High current gate drive output with 1.0A peak current, actively held low when VDD is below the UVLO threshold. |
| 7 | VDD | power_in | Device supply, 9V to 30V operating range (absolute max 30V), to be bypassed to GND with a ceramic capacitor close to the pins. |
| 8 | VREF | power_out | 5.00V reference voltage output, +1.0/-1.5% over line, load and temperature, bypassed to GND with 0.1uF to 3.3uF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | 30 | V | relative to GND | 6 | |
| OUT Voltage | OUT | -0.3 | 0.3 | V | GND -0.3V to VDD + 0.3V (max given as VDD + 0.3V) | 6 | |
| Signal Pins Voltage | -0.3 | 6 | V | GND -0.3V to 6.0V | 6 | ||
| Peak GATE Current | 1 | A | 6 | ||||
| ESD MM | 200 | V | Machine Model | 6 | |||
| ESD CDM | 1000 | V | Charged Device Model | 6 | |||
| Maximum Junction Temperature | -55 | 150 | °C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Lead Temperature (Soldering 10s) | 300 | °C | SOIC lead tips only | 6 | |||
| Operating Temperature Range | -40 | 105 | °C | ISL884xAAxZ | 6 | ||
| Supply Voltage Range | VDD | 9 | 30 | V | ISL884xA (Typical, Note 2) | 6 | |
| Thermal Resistance | θJA | 100 | °C/W | SOIC package, Typical | 6 | ||
| START Threshold | 13.3 | 14.3 | 15.3 | V | ISL8842A, ISL8844A (Note 6) | 6 | |
| STOP Threshold | 8 | 8.8 | 9.6 | V | ISL8842A, ISL8844A | 6 | |
| Hysteresis | 5.4 | V | ISL8842A, ISL8844A | 6 | |||
| Startup Current | IDD | 90 | 125 | µA | VDD < START Threshold | 6 | |
| Operating Current | IDD | 2.9 | 4 | mA | Note 4 | 6 | |
| Operating Supply Current | ID | 4.75 | 5.5 | mA | Includes 1nF GATE loading | 6 | |
| Reference Voltage Overall Accuracy | VREF | 4.925 | 5 | 5.05 | V | Over line (VDD = 12V to 30V), load, temperature | 6 |
| Reference Long Term Stability | 5 | mV | TA = +125°C, 1000 hours (Note 5) | 6 | |||
| Reference Current Limit, Sourcing | -20 | mA | 6 | ||||
| Reference Current Limit, Sinking | 5 | mA | 6 | ||||
| CS Input Bias Current | -1 | 1 | µA | VCS = 1V | 6 | ||
| CS Offset Voltage | 95 | 100 | 105 | mV | VCS = 0V (Note 5) | 6 | |
| COMP to PWM Comparator Offset Voltage | 0.8 | 1.15 | 1.3 | V | VCS = 0V (Note 5) | 6 | |
| Input Signal, Maximum | 0.97 | 1 | 1.03 | V | 7 | ||
| Gain | ACS | 2.5 | 3 | 3.5 | V/V | 0 < VCS < 910mV, VFB = 0V | 7 |
| CS to OUT Delay | 35 | 55 | ns | 7 | |||
| Open Loop Voltage Gain | 60 | 90 | dB | Note 5 | 7 | ||
| Unity Gain Bandwidth | 1 | 1.5 | MHz | Note 5 | 7 | ||
| Error Amplifier Reference Voltage | 2.475 | 2.5 | 2.53 | V | VFB = VCOMP | 7 | |
| FB Input Bias Current | -1 | -0.2 | 1 | µA | VFB = 0V | 7 | |
| COMP Sink Current | 1 | mA | VCOMP = 1.5V, VFB = 2.7V | 7 | |||
| COMP Source Current | -0.4 | mA | VCOMP = 1.5V, VFB = 2.3V | 7 | |||
| COMP VOH | VOH | 4.8 | V | VFB = 2.3V (max printed as VREF) | 7 | ||
| COMP VOL | VOL | 0.4 | 1 | V | VFB = 2.7V | 7 | |
| PSRR | PSRR | 60 | 80 | dB | Frequency = 120Hz, VDD = 12V to 30V (Note 5) | 7 | |
| Oscillator Frequency Accuracy | 48 | 51 | 53 | kHz | Initial, TA = +25°C | 7 | |
| Frequency Variation with VDD | 0.2 | 1 | % | TA= +25°C, (f30V - f10V)/f30V | 7 | ||
| Temperature Stability | 5 | % | Note 5 | 7 | |||
| Oscillator Amplitude, Peak to Peak | 1.75 | V | Static Test | 7 | |||
| RTCT Discharge Voltage (Valley Voltage) | 1 | V | Static Test | 7 | |||
| Discharge Current | 6.5 | 7.8 | 8.5 | mA | RTCT = 2.0V | 7 | |
| Gate VOH | 1 | 2 | V | VDD to OUT, IOUT = -200mA | 7 | ||
| Gate VOL | 1 | 2 | V | OUT to GND, IOUT = 200mA | 7 | ||
| Peak Output Current | 1 | A | COUT = 1nF (Note 5) | 7 | |||
| Rise Time | 20 | 40 | ns | COUT = 1nF (Note 5) | 7 | ||
| Fall Time | 20 | 40 | ns | COUT = 1nF (Note 5) | 7 | ||
| GATE VOL UVLO Clamp Voltage | 1.2 | V | VDD = 5V, ILOAD = 1mA | 7 | |||
| Maximum Duty Cycle | 47 | 48 | % | COMP = VREF | 7 | ||
| Minimum Duty Cycle | 0 | % | COMP = GND | 7 |
CAD (KiCad official)
- Symbol:
ISL8844AABZ-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl8844aabz-t-etched.step/isl8844aabz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl8844aabz-t.step/isl8844aabz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (15 pp, sha256
58b9589491eb4225, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL8844AABZ-T
**RENESAS** · AC-DC Controllers & Regulators · SOIC-8
ISL8844AABZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input, with the loop compensation network connected between COMP and FB. |
| 2 | FB | input | Output voltage feedback to the inverting input of the error amplifier, whose non-inverting input is tied internally to a 2.5V reference. |
| 3 | CS | input | Current sense input to the PWM comparator, nominally 0V to 1.0V with an internal offset of 100mV. |
| 4 | RTCT | passive | Oscillator timing pin where RT from VREF and CT to GND set the switching frequency (up to 2.0MHz) and maximum duty cycle. |
| 5 | GND | power_in | Power and small signal reference ground for all functions. |
| 6 | OUT | output | High current gate drive output with 1.0A peak current, actively held low when VDD is below the UVLO threshold. |
| 7 | VDD | power_in | Device supply, 9V to 30V operating range (absolute max 30V), to be bypassed to GND with a ceramic capacitor close to the pins. |
| 8 | VREF | power_out | 5.00V reference voltage output, +1.0/-1.5% over line, load and temperature, bypassed to GND with 0.1uF to 3.3uF. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | | 30 | V | relative to GND | 6 |
| OUT Voltage | OUT | -0.3 | | 0.3 | V | GND -0.3V to VDD + 0.3V (max given as VDD + 0.3V) | 6 |
| Signal Pins Voltage | | -0.3 | | 6 | V | GND -0.3V to 6.0V | 6 |
| Peak GATE Current | | | | 1 | A | | 6 |
| ESD MM | | | | 200 | V | Machine Model | 6 |
| ESD CDM | | | | 1000 | V | Charged Device Model | 6 |
| Maximum Junction Temperature | | -55 | | 150 | °C | | 6 |
| Storage Temperature Range | | -65 | | 150 | °C | | 6 |
| Lead Temperature (Soldering 10s) | | | | 300 | °C | SOIC lead tips only | 6 |
| Operating Temperature Range | | -40 | | 105 | °C | ISL884xAAxZ | 6 |
| Supply Voltage Range | VDD | 9 | | 30 | V | ISL884xA (Typical, Note 2) | 6 |
| Thermal Resistance | θJA | | 100 | | °C/W | SOIC package, Typical | 6 |
| START Threshold | | 13.3 | 14.3 | 15.3 | V | ISL8842A, ISL8844A (Note 6) | 6 |
| STOP Threshold | | 8 | 8.8 | 9.6 | V | ISL8842A, ISL8844A | 6 |
| Hysteresis | | | 5.4 | | V | ISL8842A, ISL8844A | 6 |
| Startup Current | IDD | | 90 | 125 | µA | VDD < START Threshold | 6 |
| Operating Current | IDD | | 2.9 | 4 | mA | Note 4 | 6 |
| Operating Supply Current | ID | | 4.75 | 5.5 | mA | Includes 1nF GATE loading | 6 |
| Reference Voltage Overall Accuracy | VREF | 4.925 | 5 | 5.05 | V | Over line (VDD = 12V to 30V), load, temperature | 6 |
| Reference Long Term Stability | | | 5 | | mV | TA = +125°C, 1000 hours (Note 5) | 6 |
| Reference Current Limit, Sourcing | | -20 | | | mA | | 6 |
| Reference Current Limit, Sinking | | 5 | | | mA | | 6 |
| CS Input Bias Current | | -1 | | 1 | µA | VCS = 1V | 6 |
| CS Offset Voltage | | 95 | 100 | 105 | mV | VCS = 0V (Note 5) | 6 |
| COMP to PWM Comparator Offset Voltage | | 0.8 | 1.15 | 1.3 | V | VCS = 0V (Note 5) | 6 |
| Input Signal, Maximum | | 0.97 | 1 | 1.03 | V | | 7 |
| Gain | ACS | 2.5 | 3 | 3.5 | V/V | 0 < VCS < 910mV, VFB = 0V | 7 |
| CS to OUT Delay | | | 35 | 55 | ns | | 7 |
| Open Loop Voltage Gain | | 60 | 90 | | dB | Note 5 | 7 |
| Unity Gain Bandwidth | | 1 | 1.5 | | MHz | Note 5 | 7 |
| Error Amplifier Reference Voltage | | 2.475 | 2.5 | 2.53 | V | VFB = VCOMP | 7 |
| FB Input Bias Current | | -1 | -0.2 | 1 | µA | VFB = 0V | 7 |
| COMP Sink Current | | 1 | | | mA | VCOMP = 1.5V, VFB = 2.7V | 7 |
| COMP Source Current | | -0.4 | | | mA | VCOMP = 1.5V, VFB = 2.3V | 7 |
| COMP VOH | VOH | 4.8 | | | V | VFB = 2.3V (max printed as VREF) | 7 |
| COMP VOL | VOL | 0.4 | | 1 | V | VFB = 2.7V | 7 |
| PSRR | PSRR | 60 | 80 | | dB | Frequency = 120Hz, VDD = 12V to 30V (Note 5) | 7 |
| Oscillator Frequency Accuracy | | 48 | 51 | 53 | kHz | Initial, TA = +25°C | 7 |
| Frequency Variation with VDD | | | 0.2 | 1 | % | TA= +25°C, (f30V - f10V)/f30V | 7 |
| Temperature Stability | | | | 5 | % | Note 5 | 7 |
| Oscillator Amplitude, Peak to Peak | | | 1.75 | | V | Static Test | 7 |
| RTCT Discharge Voltage (Valley Voltage) | | | 1 | | V | Static Test | 7 |
| Discharge Current | | 6.5 | 7.8 | 8.5 | mA | RTCT = 2.0V | 7 |
| Gate VOH | | | 1 | 2 | V | VDD to OUT, IOUT = -200mA | 7 |
| Gate VOL | | | 1 | 2 | V | OUT to GND, IOUT = 200mA | 7 |
| Peak Output Current | | | 1 | | A | COUT = 1nF (Note 5) | 7 |
| Rise Time | | | 20 | 40 | ns | COUT = 1nF (Note 5) | 7 |
| Fall Time | | | 20 | 40 | ns | COUT = 1nF (Note 5) | 7 |
| GATE VOL UVLO Clamp Voltage | | | | 1.2 | V | VDD = 5V, ILOAD = 1mA | 7 |
| Maximum Duty Cycle | | 47 | 48 | | % | COMP = VREF | 7 |
| Minimum Duty Cycle | | | | 0 | % | COMP = GND | 7 |
## CAD (KiCad official)
- Symbol: `ISL8844AABZ-T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `isl8844aabz-t-etched.step` / `isl8844aabz-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl8844aabz-t.step` / `isl8844aabz-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/isl8844aabz-t-datasheet.pdf) (15 pp, sha256 `58b9589491eb4225`, retrieved 2026-10-26, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl8844aabz-t-datasheet.pdf)