Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL88002IE17Z-T

RENESAS · Monitors & Reset Circuits · SC-70-3

ISL88002IE17Z-T from RENESAS, in a SC-70-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground IC reference.
2 RST output The ISL88002 RST is an active-low open-drain reset output that is pulled to GND (LOW) when reset is asserted, with suggested pull-up resistor values in the range of 5kΩ to 100kΩ.
3 VDD power_in VDD is the power supply terminal and monitored input, compared against the factory-programmed trip point VTHVDD (1.67V nominal for this variant), with a stated supply range of 1.8V to 2.75V for VTHVDD = 1.67V.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SC-70-3
Category Power Management
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 1.8 2.75 V VTHVDD = 2.32V, 2.19V, 1.67V, 1.58V 8
Supply Current (RESET, RESET open) IDD 160 300 nA VDD = 1.8V, VTHVDD = 1.67V, 1.58V 8
Falling Fixed VDD Voltage Trip Point VTHVDD 1.65 1.67 1.69 V ISL88001, 88002, 88003Ix17, TA = +25°C 8
Falling Fixed VDD Voltage Trip Point (over temperature) VTHVDD 1.625 1.715 V ISL88001, 88002, 88003Ix17 8
Reset Output Voltage Low VOL 0.2 0.4 V VDD < VTHVDD, Sinking 0.5mA for ISL88002 9
POR Timeout Delay tPOR 140 200 260 ms 9
VTH to Reset Asserted Delay tRPD 15 µs 9
Load Capacitance on Reset Pin CLOAD 5 pF 9
Voltage on Any Pin with respect to GND -0.3 6.5 V 8
DC Output Current 10 mA 8
Temperature Under Bias -40 125 °C 8
Storage Temperature -65 150 °C 8
Temperature Range (Industrial) -40 85 °C 8
Thermal Resistance, 3 Lead SC-70 θJA 640 °C/W Typical, mounted on high effective thermal conductivity test board in free air 8
Hysteresis at VDD Input VTHVDDHYST 1 % 8
VTHVDD Temperature Coefficient TVTHVDD 0.48 mV/°C 8

CAD (KiCad official)

  • Symbol: ISL88002IE17Z-T
  • Footprint: Package_TO_SOT_SMD:SOT-323_SC-70
  • 3D model: SC-70-3 (KiCad packages3D, STEP)
  • 3D model files: isl88002ie17z-t-etched.step / isl88002ie17z-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl88002ie17z-t.step / isl88002ie17z-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (16 pp, sha256 e642ca541ddab0b5, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF