main
Ray
Publish 0.1.0
b2bd18e
ISL8485EIBZ-T
RENESAS · RS-485 / RS-422 ICs · SOIC-8
ISL8485EIBZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high if A > B by at least 0.2V, low if A < B by 0.2V or more, and high if A and B are unconnected (floating). |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled when DE is high and are high impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces output Y low and Z high, and a high on DI forces Y high and Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | ±15kV HBM ESD protected RS-485/RS-422 noninverting receiver input (A) when DE = 0 and noninverting driver output (Y) when DE = 1. |
| 7 | B/Z | bidirectional | ±15kV HBM ESD protected RS-485/RS-422 inverting receiver input (B) when DE = 0 and inverting driver output (Z) when DE = 1. |
| 8 | VCC | power_in | System power supply input, specified at 4.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver Differential VOUT (With Load), RS-422 load | VOD2 | 2 | 3 | V | R = 50Ω (RS-422), (Figure 1 on page 6); Full | 4 | |
| Driver Differential VOUT (With Load), RS-485 load | VOD2 | 1.5 | 2.3 | 5 | V | R = 27Ω (RS-485), (Figure 1 on page 6); Full | 4 |
| Change in Magnitude of Driver Differential VOUT for Complementary Output States | VOD | 0.01 | 0.2 | V | R = 27Ω or 50Ω, (Figure 1 on page 6); Full | 4 | |
| Driver Common-Mode VOUT | VOC | 3 | V | R = 27Ω or 50Ω, (Figure 1 on page 6); Full | 4 | ||
| Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States | VOC | 0.01 | 0.2 | V | R = 27Ω or 50Ω, (Figure 1 on page 6); Full | 4 | |
| Logic Input High Voltage | VIH | 2 | V | DE, DI, RE; Full | 4 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | DE, DI, RE; Full | 4 | ||
| Logic Input Current, DI (ISL8485E) | IIN1 | -2 | 2 | µA | DI (ISL8485E); Full | 4 | |
| Logic Input Current, DE and RE (ISL8485E) | IIN1 | -25 | 25 | µA | DE, RE (ISL8485E); Full | 4 | |
| Input Current (A, B), VIN = 12V | IIN2 | 1 | mA | DE = 0V, VCC = 0V or 4.5 to 5.5V, VIN = 12V (Note 14); Full | 4 | ||
| Input Current (A, B), VIN = -7V | IIN2 | -0.8 | mA | DE = 0V, VCC = 0V or 4.5 to 5.5V, VIN = -7V (Note 14); Full | 4 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V; Full | 4 | |
| Receiver Output High Voltage | VOH | 3.5 | V | IO = -4mA, VID = 200mV; Full | 4 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = -4mA, VID = 200mV; Full | 4 | ||
| Three-State (High Impedance) Receiver Output Current | IOZR | -1 | 1 | µA | 0.4V ≤ VO ≤ 2.4V; Full | 4 | |
| Receiver Input Resistance | RIN | 12 | kΩ | -7V ≤ VCM ≤ 12V; Full | 5 | ||
| No-Load Supply Current (ISL8485E), driver enabled | ICC | 700 | 900 | µA | DI, RE = 0V or VCC; DE = VCC; Full | 5 | |
| No-Load Supply Current (ISL8485E), driver disabled | ICC | 500 | 565 | µA | DI, RE = 0V or VCC; DE = 0V; Full | 5 | |
| Driver Short-Circuit Current, VO = High or Low | IOSD1 | 35 | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V (Note 8); Full | 5 | |
| Receiver Short-Circuit Current | IOSR | 7 | 85 | mA | 0V ≤ VO ≤ VCC; Full | 5 | |
| Driver Input to Output Delay (ISL8485E) | tPLH, tPHL | 18 | 30 | 50 | ns | RDIFF = 54Ω, CL = 100pF, (Figure 2 on page 7); Full | 5 |
| Driver Output Skew (ISL8485E) | tSKEW | 2 | 10 | ns | RDIFF = 54Ω, CL = 100pF, (Figure 2 on page 7); Full | 5 | |
| Driver Differential Rise or Fall Time (ISL8485E) | tR, tF | 3 | 11 | 25 | ns | RDIFF = 54Ω, CL = 100pF, (Figure 2 on page 7); Full | 5 |
| Driver Enable to Output High (ISL8485E) | tZH | 17 | 70 | ns | CL = 100pF, SW = GND, (Figure 3 on page 7); Full | 5 | |
| Driver Enable to Output Low (ISL8485E) | tZL | 14 | 70 | ns | CL = 100pF, SW = VCC, (Figure 3 on page 7); Full | 5 | |
| Driver Disable from Output High (ISL8485E) | tHZ | 19 | 70 | ns | CL = 15pF, SW = GND, (Figure 3 on page 7); Full | 5 | |
| Driver Disable from Output Low (ISL8485E) | tLZ | 13 | 70 | ns | CL = 15pF, SW = VCC, (Figure 3 on page 7); Full | 5 | |
| Receiver Input to Output Delay (ISL8485E) | tPLH, tPHL | 30 | 40 | 150 | ns | (Figure 4 on page 7); Full | 5 |
| Receiver Enable to Output High (ISL8485E) | tZH | 9 | 50 | ns | CL = 15pF, SW = GND, (Figure 5 on page 8); Full | 5 | |
| Receiver Enable to Output Low (ISL8485E) | tZL | 9 | 50 | ns | CL = 15pF, SW = VCC, (Figure 5 on page 8); Full | 5 | |
| Receiver Disable from Output High (ISL8485E) | tHZ | 9 | 50 | ns | CL = 15pF, SW = GND, (Figure 5 on page 8); Full | 5 | |
| Receiver Disable from Output Low (ISL8485E) | tLZ | 9 | 50 | ns | CL = 15pF, SW = VCC, (Figure 5 on page 8); Full | 5 | |
| Maximum Data Rate (ISL8485E) | fMAX | 10 | Mbps | (Note 15); Full | 5 | ||
| VCC to Ground | VCC | 7 | V | 4 | |||
| Input Voltages DI, DE, RE | VIN | -0.5 | V | Upper limit printed as (VCC +0.5V) | 4 | ||
| Input/Output Voltages A/Y, B/Z | VI/O | -8 | 12.5 | V | 4 | ||
| Output Voltage RO | VO | -0.5 | V | Upper limit printed as (VCC +0.5V) | 4 | ||
| Maximum Junction Temperature (Plastic Package) | TJ | 150 | °C | 4 | |||
| Maximum Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Supply voltage VCC (ISL8485E, 10% tolerance) | VCC | 4.5 | 5 | 5.5 | V | Test conditions VCC = 4.5V to 5.5V; typical at VCC = 5V | 3 |
| Operating Temperature Range, ISL848xEIx (ISL8485EIBZ-T) | TA | -40 | 85 | °C | 4 | ||
| Thermal Resistance, 8 Ld SOIC, junction to ambient | θJA | 170 | °C/W | Typical, component mounted on low-effective thermal conductivity test board in free air (Note 5) | 4 |
CAD (KiCad official)
- Symbol:
ISL8485EIBZ-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl8485eibz-t-etched.step/isl8485eibz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl8485eibz-t.step/isl8485eibz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (15 pp, sha256
9c16faeefb495d9a, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL8485EIBZ-T
**RENESAS** · RS-485 / RS-422 ICs · SOIC-8
ISL8485EIBZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high if A > B by at least 0.2V, low if A < B by 0.2V or more, and high if A and B are unconnected (floating). |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled when DE is high and are high impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces output Y low and Z high, and a high on DI forces Y high and Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | ±15kV HBM ESD protected RS-485/RS-422 noninverting receiver input (A) when DE = 0 and noninverting driver output (Y) when DE = 1. |
| 7 | B/Z | bidirectional | ±15kV HBM ESD protected RS-485/RS-422 inverting receiver input (B) when DE = 0 and inverting driver output (Z) when DE = 1. |
| 8 | VCC | power_in | System power supply input, specified at 4.5V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver Differential VOUT (With Load), RS-422 load | VOD2 | 2 | 3 | | V | R = 50Ω (RS-422), (Figure 1 on page 6); Full | 4 |
| Driver Differential VOUT (With Load), RS-485 load | VOD2 | 1.5 | 2.3 | 5 | V | R = 27Ω (RS-485), (Figure 1 on page 6); Full | 4 |
| Change in Magnitude of Driver Differential VOUT for Complementary Output States | VOD | | 0.01 | 0.2 | V | R = 27Ω or 50Ω, (Figure 1 on page 6); Full | 4 |
| Driver Common-Mode VOUT | VOC | | | 3 | V | R = 27Ω or 50Ω, (Figure 1 on page 6); Full | 4 |
| Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States | VOC | | 0.01 | 0.2 | V | R = 27Ω or 50Ω, (Figure 1 on page 6); Full | 4 |
| Logic Input High Voltage | VIH | 2 | | | V | DE, DI, RE; Full | 4 |
| Logic Input Low Voltage | VIL | | | 0.8 | V | DE, DI, RE; Full | 4 |
| Logic Input Current, DI (ISL8485E) | IIN1 | -2 | | 2 | µA | DI (ISL8485E); Full | 4 |
| Logic Input Current, DE and RE (ISL8485E) | IIN1 | -25 | | 25 | µA | DE, RE (ISL8485E); Full | 4 |
| Input Current (A, B), VIN = 12V | IIN2 | | | 1 | mA | DE = 0V, VCC = 0V or 4.5 to 5.5V, VIN = 12V (Note 14); Full | 4 |
| Input Current (A, B), VIN = -7V | IIN2 | | | -0.8 | mA | DE = 0V, VCC = 0V or 4.5 to 5.5V, VIN = -7V (Note 14); Full | 4 |
| Receiver Differential Threshold Voltage | VTH | -0.2 | | 0.2 | V | -7V ≤ VCM ≤ 12V; Full | 4 |
| Receiver Output High Voltage | VOH | 3.5 | | | V | IO = -4mA, VID = 200mV; Full | 4 |
| Receiver Output Low Voltage | VOL | | | 0.4 | V | IO = -4mA, VID = 200mV; Full | 4 |
| Three-State (High Impedance) Receiver Output Current | IOZR | -1 | | 1 | µA | 0.4V ≤ VO ≤ 2.4V; Full | 4 |
| Receiver Input Resistance | RIN | 12 | | | kΩ | -7V ≤ VCM ≤ 12V; Full | 5 |
| No-Load Supply Current (ISL8485E), driver enabled | ICC | | 700 | 900 | µA | DI, RE = 0V or VCC; DE = VCC; Full | 5 |
| No-Load Supply Current (ISL8485E), driver disabled | ICC | | 500 | 565 | µA | DI, RE = 0V or VCC; DE = 0V; Full | 5 |
| Driver Short-Circuit Current, VO = High or Low | IOSD1 | 35 | | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V (Note 8); Full | 5 |
| Receiver Short-Circuit Current | IOSR | 7 | | 85 | mA | 0V ≤ VO ≤ VCC; Full | 5 |
| Driver Input to Output Delay (ISL8485E) | tPLH, tPHL | 18 | 30 | 50 | ns | RDIFF = 54Ω, CL = 100pF, (Figure 2 on page 7); Full | 5 |
| Driver Output Skew (ISL8485E) | tSKEW | | 2 | 10 | ns | RDIFF = 54Ω, CL = 100pF, (Figure 2 on page 7); Full | 5 |
| Driver Differential Rise or Fall Time (ISL8485E) | tR, tF | 3 | 11 | 25 | ns | RDIFF = 54Ω, CL = 100pF, (Figure 2 on page 7); Full | 5 |
| Driver Enable to Output High (ISL8485E) | tZH | | 17 | 70 | ns | CL = 100pF, SW = GND, (Figure 3 on page 7); Full | 5 |
| Driver Enable to Output Low (ISL8485E) | tZL | | 14 | 70 | ns | CL = 100pF, SW = VCC, (Figure 3 on page 7); Full | 5 |
| Driver Disable from Output High (ISL8485E) | tHZ | | 19 | 70 | ns | CL = 15pF, SW = GND, (Figure 3 on page 7); Full | 5 |
| Driver Disable from Output Low (ISL8485E) | tLZ | | 13 | 70 | ns | CL = 15pF, SW = VCC, (Figure 3 on page 7); Full | 5 |
| Receiver Input to Output Delay (ISL8485E) | tPLH, tPHL | 30 | 40 | 150 | ns | (Figure 4 on page 7); Full | 5 |
| Receiver Enable to Output High (ISL8485E) | tZH | | 9 | 50 | ns | CL = 15pF, SW = GND, (Figure 5 on page 8); Full | 5 |
| Receiver Enable to Output Low (ISL8485E) | tZL | | 9 | 50 | ns | CL = 15pF, SW = VCC, (Figure 5 on page 8); Full | 5 |
| Receiver Disable from Output High (ISL8485E) | tHZ | | 9 | 50 | ns | CL = 15pF, SW = GND, (Figure 5 on page 8); Full | 5 |
| Receiver Disable from Output Low (ISL8485E) | tLZ | | 9 | 50 | ns | CL = 15pF, SW = VCC, (Figure 5 on page 8); Full | 5 |
| Maximum Data Rate (ISL8485E) | fMAX | 10 | | | Mbps | (Note 15); Full | 5 |
| VCC to Ground | VCC | | | 7 | V | | 4 |
| Input Voltages DI, DE, RE | VIN | -0.5 | | | V | Upper limit printed as (VCC +0.5V) | 4 |
| Input/Output Voltages A/Y, B/Z | VI/O | -8 | | 12.5 | V | | 4 |
| Output Voltage RO | VO | -0.5 | | | V | Upper limit printed as (VCC +0.5V) | 4 |
| Maximum Junction Temperature (Plastic Package) | TJ | | | 150 | °C | | 4 |
| Maximum Storage Temperature Range | TSTG | -65 | | 150 | °C | | 4 |
| Supply voltage VCC (ISL8485E, 10% tolerance) | VCC | 4.5 | 5 | 5.5 | V | Test conditions VCC = 4.5V to 5.5V; typical at VCC = 5V | 3 |
| Operating Temperature Range, ISL848xEIx (ISL8485EIBZ-T) | TA | -40 | | 85 | °C | | 4 |
| Thermal Resistance, 8 Ld SOIC, junction to ambient | θJA | | 170 | | °C/W | Typical, component mounted on low-effective thermal conductivity test board in free air (Note 5) | 4 |
## CAD (KiCad official)
- Symbol: `ISL8485EIBZ-T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `isl8485eibz-t-etched.step` / `isl8485eibz-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl8485eibz-t.step` / `isl8485eibz-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883851268018176) (15 pp, sha256 `9c16faeefb495d9a`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl8485eibz-t-datasheet.pdf)