component
ISL81487IBZ-T
Public Made by Adomby adom
RENESAS RS-485 / RS-422 ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISL81487IBZ-T
RENESAS · RS-485 / RS-422 ICs · SOIC-8
ISL81487IBZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high when A exceeds B by at least 0.2V, low when A is 0.2V or more below B, and high when A and B are unconnected (floating). |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high-impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled when DE is high and are high-impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces Y low and Z high, and a high on DI forces Y high and Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | RS-485/422 noninverting receiver input (A) when DE is low and noninverting driver output (Y) when DE is high; the A/Y pin is rated from -8V to +12.5V. |
| 7 | B/Z | bidirectional | RS-485/422 inverting receiver input (B) when DE is low and inverting driver output (Z) when DE is high; the B/Z pin is rated from -8V to +12.5V. |
| 8 | VCC | power_in | System power supply input, 4.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver Differential VOUT (with load), RS-422 | VOD2 | 2 | 3 | V | R = 50 (RS-422), (Figure 1), Full | 4 | |
| Driver Differential VOUT (with load), RS-485 | VOD2 | 1.5 | 2.3 | 5 | V | R = 27 (RS-485), (Figure 1), Full | 4 |
| Change in Magnitude of Driver Differential VOUT for Complementary Output States | VOD | 0.01 | 0.2 | V | R = 27 or 50, (Figure 1) | 4 | |
| Driver Common-Mode VOUT | VOC | 3 | V | R = 27 or 50, (Figure 1) | 4 | ||
| Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States | VOC | 0.01 | 0.2 | V | R = 27 or 50, (Figure 1) | 4 | |
| Logic Input High Voltage | VIH | 2 | V | DE, DI, RE | 4 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 4 | ||
| Logic Input Current | IIN1 | -2 | 2 | µA | DE, DI, RE | 4 | |
| Input Current (A/Y, B/Z), VIN = 12V, VCC = 4.5 to 5.5V | IIN2 | 140 | µA | DE = 0V, VCC = 4.5 to 5.5V, VIN = 12V (ISL81483, ISL81487) | 4 | ||
| Input Current (A/Y, B/Z), VIN = -7V, VCC = 4.5 to 5.5V | IIN2 | -120 | µA | DE = 0V, VCC = 4.5 to 5.5V, VIN = -7V (ISL81483, ISL81487) | 4 | ||
| Input Current (A/Y, B/Z), VIN = 12V, VCC = 0V | IIN2 | 180 | µA | DE = 0V, VCC = 0V, VIN = 12V (ISL81483, ISL81487) | 4 | ||
| Input Current (A/Y, B/Z), VIN = -7V, VCC = 0V | IIN2 | -100 | µA | DE = 0V, VCC = 0V, VIN = -7V (ISL81483, ISL81487) | 4 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V, Full | 4 | |
| Receiver Output High Voltage | VOH | 3.5 | V | IO = -4mA, VID = 200mV, Full | 4 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = -4mA, VID = 200mV, Full | 4 | ||
| Three-State (high impedance) Receiver Output Current | IOZR | 1 | µA | 0.4V ≤ VO ≤ 2.4V, Full | 4 | ||
| Receiver Input Resistance (ISL81483, ISL81487) | RIN | 96 | k | -7V ≤ VCM ≤ 12V, Full | 5 | ||
| No-Load Supply Current, DE = VCC | ICC | 400 | 500 | µA | ISL81487, DI, RE = 0V or VCC; DE = VCC, Full | 5 | |
| No-Load Supply Current, DE = 0V | ICC | 350 | 420 | µA | ISL81487, DI, RE = 0V or VCC; DE = 0V, Full | 5 | |
| Driver Short-Circuit Current, VO = High or Low | IOSD1 | 35 | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V, (Note 4), Full | 5 | |
| Receiver Short-Circuit Current | IOSR | 7 | 85 | mA | 0V ≤ VO ≤ VCC, Full | 5 | |
| Driver Input to Output Delay (ISL81487) | tPLH, tPHL | 15 | 24 | 50 | ns | RDIFF = 54, CL = 100pF, (Figure 2), Full | 5 |
| Driver Output Skew (ISL81487) | tSKEW | 2 | 10 | ns | RDIFF = 54, CL = 100pF, (Figure 2), Full | 5 | |
| Driver Differential Rise or Fall Time (ISL81487) | tR, tF | 3 | 12 | 25 | ns | RDIFF = 54, CL = 100pF, (Figure 2), Full | 5 |
| Driver Enable to Output High (ISL81487) | tZH | 14 | 70 | ns | CL = 100pF, SW = GND, (Figure 3), Full | 5 | |
| Driver Enable to Output Low (ISL81487) | tZL | 14 | 70 | ns | CL = 100pF, SW = VCC, (Figure 3), Full | 5 | |
| Driver Disable from Output High (ISL81487) | tHZ | 44 | 70 | ns | CL = 15pF, SW = GND, (Figure 3), Full | 5 | |
| Driver Disable from Output Low (ISL81487) | tLZ | 21 | 70 | ns | CL = 15pF, SW = VCC, (Figure 3), Full | 5 | |
| Receiver Input to Output Delay (ISL81487) | tPLH, tPHL | 30 | 90 | 150 | ns | (Figure 4), Full | 5 |
| Receiver Enable to Output High (ISL81487) | tZH | 9 | 50 | ns | CL = 15pF, SW = GND, (Figure 5), Full | 5 | |
| Receiver Enable to Output Low (ISL81487) | tZL | 9 | 50 | ns | CL = 15pF, SW = VCC, (Figure 5), Full | 5 | |
| Receiver Disable from Output High (ISL81487) | tHZ | 9 | 50 | ns | CL = 15pF, SW = GND, (Figure 5), Full | 5 | |
| Receiver Disable from Output Low (ISL81487) | tLZ | 9 | 50 | ns | CL = 15pF, SW = VCC, (Figure 5), Full | 5 | |
| Maximum Data Rate (ISL81487) | fMAX | 5 | Mbps | Full | 5 | ||
| VCC to Ground | VCC | 7 | V | 4 | |||
| Input Voltages DI, DE, RE | -0.5 | V | 4 | ||||
| Input/Output Voltages A/Y, B/Z | -8 | 12.5 | V | 4 | |||
| Output Voltage RO | -0.5 | V | 4 | ||||
| ESD Rating HBM | 7 | kV | HBM per MIL-STD-883, Method 3015.7 (printed as >7kV) | 4 | |||
| Maximum Junction Temperature (Plastic Package) | TJ | 150 | °C | 4 | |||
| Maximum Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Maximum Lead Temperature (Soldering 10s) | 300 | °C | Soldering 10s (SOIC - lead tips only) | 4 | |||
| Supply Voltage VCC | VCC | 4.5 | 5.5 | V | Electrical specification test conditions | 4 | |
| Operating Temperature Range | -40 | 85 | °C | ISL8XXXIX (industrial grade, applies to ISL81487IBZ) | 4 | ||
| Thermal Resistance, Junction to Ambient, 8 Ld SOIC | JA | 170 | °C/W | Typical, Note 1: mounted on low effective thermal conductivity test board in free air | 4 |
CAD (KiCad official)
- Symbol:
ISL81487IBZ-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl81487ibz-t-etched.step/isl81487ibz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl81487ibz-t.step/isl81487ibz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (14 pp, sha256
0c06224e3295a277, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).