main
Ray
Publish 0.1.0
d115adc
ISL80111IRAJZ
RENESAS · Linear Voltage Regulators (LDO) · DFN-10(3x3)
ISL80111IRAJZ from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Output voltage pin with a range of 0.5V to 3.3V. |
| 2 | VOUT | output | Output voltage pin with a range of 0.5V to 3.3V. |
| 3 | ADJ | input | ADJ pin for externally setting VOUT through the resistor divider, rated 0V to 5.5V relative to GND. |
| 4 | VBIAS | power_in | Bias voltage pin for internal control circuits with a range of 2.9V to 5.5V. |
| 5 | GND | power_in | Ground pin. |
| 6 | PG | output | Open-drain power-good flag where logic low means VOUT is not in regulation, range 0V to VBIAS, and it can sink up to 10mA. |
| 7 | ENABLE | input | VIN-independent TTL and CMOS compatible chip enable, range 0V to VBIAS, which must be tied to VBIAS when unused. |
| 8 | NC | unconnected | No connect. |
| 9 | VIN | power_in | Input supply pin with a range of 0.7V to 3.6V. |
| 10 | VIN | power_in | Input supply pin with a range of 0.7V to 3.6V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 8. For θJB, the board temperature is taken on the board near the edge of the package, on a copper trace at either lead #3 or lead #5, as applicable. See | 4 |
CAD (KiCad official)
- Symbol:
ISL80111IRAJZ - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
isl80111irajz-etched.step/isl80111irajz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl80111irajz.step/isl80111irajz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (17 pp, sha256
d613b152e8e1b270, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL80111IRAJZ
**RENESAS** · Linear Voltage Regulators (LDO) · DFN-10(3x3)
ISL80111IRAJZ from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Output voltage pin with a range of 0.5V to 3.3V. |
| 2 | VOUT | output | Output voltage pin with a range of 0.5V to 3.3V. |
| 3 | ADJ | input | ADJ pin for externally setting VOUT through the resistor divider, rated 0V to 5.5V relative to GND. |
| 4 | VBIAS | power_in | Bias voltage pin for internal control circuits with a range of 2.9V to 5.5V. |
| 5 | GND | power_in | Ground pin. |
| 6 | PG | output | Open-drain power-good flag where logic low means VOUT is not in regulation, range 0V to VBIAS, and it can sink up to 10mA. |
| 7 | ENABLE | input | VIN-independent TTL and CMOS compatible chip enable, range 0V to VBIAS, which must be tied to VBIAS when unused. |
| 8 | NC | unconnected | No connect. |
| 9 | VIN | power_in | Input supply pin with a range of 0.7V to 3.6V. |
| 10 | VIN | power_in | Input supply pin with a range of 0.7V to 3.6V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 8. For θJB, the board temperature is taken on the board near the edge of the package, on a copper trace at either lead #3 or lead #5, as applicable. See | 4 |
## CAD (KiCad official)
- Symbol: `ISL80111IRAJZ`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files: `isl80111irajz-etched.step` / `isl80111irajz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl80111irajz.step` / `isl80111irajz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/isl80111irajz-datasheet.pdf) (17 pp, sha256 `d613b152e8e1b270`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl80111irajz-datasheet.pdf)