ISL80102IRAJZ-T

{
  "slug": "isl80102irajz-t",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-10(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "isl80102irajz-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "isl80102irajz-t.kicad_sym",
    "isl80102irajz-t.kicad_mod",
    "isl80102irajz-t.glb",
    "isl80102irajz-t.step",
    "isl80102irajz-t.lbr",
    "docs/hero.png",
    "docs/isl80102irajz-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "isl80102irajz-t-hero.glb",
    "isl80102irajz-t-hero.overlay.json",
    "isl80102irajz-t-etched.glb"
  ],
  "component": {
    "mpn": "ISL80102IRAJZ-T",
    "manufacturer": "RENESAS",
    "package": "DFN-10(3x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600525727909490688",
    "parts": {
      "symbol": "isl80102irajz-t.kicad_sym",
      "footprint": "isl80102irajz-t.kicad_mod",
      "model_3d": "isl80102irajz-t-hero.glb",
      "model_3d_plain": "isl80102irajz-t-etched.glb",
      "model_3d_step": "isl80102irajz-t-etched.step",
      "model_3d_step_plain": "isl80102irajz-t.step",
      "lbr": "isl80102irajz-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C6211252",
      "digikey": "ISL80102IRAJZ-T-ND",
      "mouser": "968-ISL80102IRAJZ-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T01:43:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ISL80102IRAJZ-T-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "968-ISL80102IRAJZ-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output voltage pin; VOUT must be bypassed with at least 10µF X5R/X7R ceramic capacitance for stability, routed with traces no longer than 0.5cm."
      },
      {
        "number": "2",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output voltage pin; VOUT must be bypassed with at least 10µF X5R/X7R ceramic capacitance for stability, routed with traces no longer than 0.5cm."
      },
      {
        "number": "3",
        "name": "ADJ",
        "type": "input",
        "description": "Feedback pin for externally set VOUT, with a 500mV reference (491mV to 509mV) that sets the output through an external resistor divider."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good flag that goes logic low when VOUT is not in regulation, sinks up to 10mA, must not be pulled up above VIN, and must be grounded if not used."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the LDO."
      },
      {
        "number": "6",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin where an external capacitor adjusts inrush current; leave open if not used."
      },
      {
        "number": "7",
        "name": "ENABLE",
        "type": "input",
        "description": "VIN-independent chip enable, TTL and CMOS compatible, which must not be left floating and must be tied to VIN if unused."
      },
      {
        "number": "8",
        "name": "DNC",
        "type": "unconnected",
        "description": "Do not connect this pin to ground or supply; leave floating."
      },
      {
        "number": "9",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin; operating range is 2.2V to 6V, with a minimum 10µF ceramic input capacitor connected to VIN and ground with traces no longer than 0.5cm."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin; operating range is 2.2V to 6V, with a minimum 10µF ceramic input capacitor connected to VIN and ground with traces no longer than 0.5cm."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The EPAD is not a numbered pin. It is listed as 'EPAD' in the datasheet, and its type is set to powe; The datasheet covers both ISL80102 and ISL80103 with the same 10 Ld 3x3 DFN pinout. The pinout appli",
          "exposed pad 11 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 17,
        "cost_usd": 0.095,
        "at": "2026-10-21T01:39:43"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600525727909490688",
        "pages": 17,
        "sha256": "66fe8917f8939333",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "isl80102irajz-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "isl80102irajz-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e5a4875f8d8d7d6965f90351c5da846cd2b1d906d0a6f38f116a41cbb6301d4b",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}