main
Ray isl6752aaza-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 406642f
{
  "slug": "isl6752aaza-t",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS DC-DC Converters, QSOP-16-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "isl6752aaza-t"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "isl6752aaza-t.kicad_sym",
    "isl6752aaza-t.kicad_mod",
    "isl6752aaza-t.glb",
    "isl6752aaza-t.step",
    "isl6752aaza-t.lbr",
    "docs/hero.png",
    "docs/isl6752aaza-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "isl6752aaza-t-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "ISL6752AAZA-T",
    "manufacturer": "RENESAS",
    "package": "QSOP-16-150mil",
    "pin_count": 16,
    "category": "DC-DC Converters",
    "parts": {
      "symbol": "isl6752aaza-t.kicad_sym",
      "footprint": "isl6752aaza-t.kicad_mod",
      "model_3d": "isl6752aaza-t-etched.glb",
      "model_3d_plain": "isl6752aaza-t.glb",
      "model_3d_step": "isl6752aaza-t-etched.step",
      "model_3d_step_plain": "isl6752aaza-t.step",
      "lbr": "isl6752aaza-t.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VADJ",
        "type": "input",
        "description": "0 V to 5.0 V control input that sets the phase relationship between the SR outputs (OUTLLN/OUTLRN) and the lower PWM outputs (OUTLL/OUTLR). VADJ < 2.425 V advances the SR outputs; VADJ > 2.575 V delays them; 2.50 V ±75 mV gives zero phase difference. A weak internal 50% divider from VREF holds the pin at ~2.5 V when left open."
      },
      {
        "number": "2",
        "name": "VREF",
        "type": "power_out",
        "description": "5.0 V ±3% precision reference output over line, load and temperature. Sources up to 10 mA and sinks at least 5 mA; short-circuit current limited to -15 mA to -100 mA. Bypass to GND with a 0.1 µF to 2.2 µF low-ESR capacitor."
      },
      {
        "number": "3",
        "name": "VERR",
        "type": "input",
        "description": "Inverting input of the PWM comparator; accepts the external error-amplifier signal directly or via an opto-coupler for closed-loop regulation. Internally pulled up by a nominal 1 mA current source; VOH is at least 4.20 V open circuit. Zero-duty-cycle occurs when VERR < ~0.85-1.20 V."
      },
      {
        "number": "4",
        "name": "CTBUF",
        "type": "output",
        "description": "Buffered replica of the CT sawtooth oscillator waveform, capable of sourcing 2 mA. Nominal valley-to-peak gain of 2 V/V with a 0.40 V offset above GND. Suitable for slope compensation."
      },
      {
        "number": "5",
        "name": "RTD",
        "type": "input",
        "description": "Oscillator timing-capacitor discharge current programming pin; nominal 2.0 V. The current in a resistor from RTD to GND sets the CT discharge current (nominally 20× the resistor current), which determines the PWM dead time. Maximum recommended RTD current is 1 mA (20 mA CT discharge)."
      },
      {
        "number": "6",
        "name": "RESDEL",
        "type": "input",
        "description": "Sets the resonant delay between the toggle of the upper FETs and the turn-on of a lower FET. Applied voltage 0 V to 2 V scales resonant delay from 0 % to 100 % of the dead time (V/2 = fraction of dead time); operate below 2 V so the lower FETs are OFF before the uppers switch."
      },
      {
        "number": "7",
        "name": "CS",
        "type": "input",
        "description": "Overcurrent-comparator input; nominal 1.00 V threshold with 70 ns leading-edge blanking and ~35 ns CS-to-OUT delay (excluding LEB). Internally shorted to GND (≤20 Ω) at the termination of each PWM output. Input bias current is -2 µA to -6 µA at VCS = 0.3 V; a series input resistor may be required with high-impedance sense sources."
      },
      {
        "number": "8",
        "name": "CT",
        "type": "passive",
        "description": "Oscillator timing capacitor node. CT is charged from GND by an internal 200 µA source (valley 0.80 V, peak 2.80 V, 2.0 Vp-p) and discharged by a user-adjustable current set through RTD."
      },
      {
        "number": "9",
        "name": "OUTLL",
        "type": "output",
        "description": "Lower-left bridge FET gate drive. Pulse-width-modulated, operates in alternate sequence with OUTLR. Peak gate current 0.1 A (per absolute max), rise/fall ~110/90 ns into 220 pF at VDD = 15 V; clamped to ≤1.25 V during UVLO."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Signal and power ground return for the device. A low-impedance layout with ground planes and short traces is required because of high peak gate currents and high-frequency operation."
      },
      {
        "number": "11",
        "name": "OUTLRN",
        "type": "output",
        "description": "Complement of the lower-right PWM output OUTLR, suitable for driving synchronous rectifiers. Phase relative to OUTLR is controlled by VADJ (advance for VADJ < 2.425 V, delay for VADJ > 2.575 V, up to ±40 ns to ±300 ns)."
      },
      {
        "number": "12",
        "name": "OUTLLN",
        "type": "output",
        "description": "Complement of the lower-left PWM output OUTLL, suitable for driving synchronous rectifiers. Phase relative to OUTLL is controlled by VADJ (see VADJ description)."
      },
      {
        "number": "13",
        "name": "OUTUR",
        "type": "output",
        "description": "Upper-right bridge FET gate drive. Operates at fixed 50% duty cycle in alternate sequence with OUTUL. Peak gate current 0.1 A; UVLO output clamp ≤1.25 V."
      },
      {
        "number": "14",
        "name": "OUTUL",
        "type": "output",
        "description": "Upper-left bridge FET gate drive. Operates at fixed 50% duty cycle in alternate sequence with OUTUR. Peak gate current 0.1 A; UVLO output clamp ≤1.25 V."
      },
      {
        "number": "15",
        "name": "OUTLR",
        "type": "output",
        "description": "Lower-right bridge FET gate drive. Pulse-width-modulated, operates in alternate sequence with OUTLL. Peak gate current 0.1 A, rise/fall ~110/90 ns into 220 pF at VDD = 15 V; clamped to ≤1.25 V during UVLO."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply, recommended 9 V to 16 V (absolute max 20 V). Monitored by UVLO (typ 8.75 V start / 7.00 V stop, 1.75 V hysteresis). Start-up current 175 µA typ, operating current 11 mA typ. Bypass to GND with a ceramic capacitor as close to VDD/GND as possible."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2841890",
      "digikey": "20-ISL6752AAZA-TTR-ND",
      "mouser": "968-ISL6752AAZA-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:01:56Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "20-ISL6752AAZA-TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-ISL6752AAZA-T",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "isl6752aaza-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.42
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "14e9adcd9b6d1d5b282a866123ac59b68abf20b62a41cc9cecabd5c819d8f17d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "isl6752aaza-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.42
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "938e9a8b9ec872cfceda4094fe14506d88ee065120ab8697ab2b271da6b4b931",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}