main
Ray Publish 0.1.0 94e88a1
{
  "slug": "isl6341crz-t",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS DC-DC Controllers, TDFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "isl6341crz-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "isl6341crz-t.kicad_sym",
    "isl6341crz-t.kicad_mod",
    "isl6341crz-t.glb",
    "isl6341crz-t.step",
    "isl6341crz-t.lbr",
    "docs/hero.png",
    "docs/isl6341crz-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "isl6341crz-t-hero.glb",
    "isl6341crz-t-hero.overlay.json",
    "isl6341crz-t-etched.glb"
  ],
  "component": {
    "mpn": "ISL6341CRZ-T",
    "manufacturer": "RENESAS",
    "package": "TDFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b4a3c36ea2d8072d62c081774e7cbf53.pdf",
    "parts": {
      "symbol": "isl6341crz-t.kicad_sym",
      "footprint": "isl6341crz-t.kicad_mod",
      "model_3d": "isl6341crz-t-hero.glb",
      "model_3d_plain": "isl6341crz-t-etched.glb",
      "model_3d_step": "isl6341crz-t-etched.step",
      "model_3d_step_plain": "isl6341crz-t.step",
      "lbr": "isl6341crz-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2658524",
      "digikey": "ISL6341CRZ-T-ND",
      "mouser": "968-ISL6341CRZ-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T18:43:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ISL6341CRZ-T-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-ISL6341CRZ-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "power_out",
        "description": "Provides a ground-referenced bias to the upper MOSFET driver through a bootstrap circuit, developing a voltage equal to VGD minus the boot diode drop with respect to PHASE."
      },
      {
        "number": "2",
        "name": "PHASE",
        "type": "passive",
        "description": "Connects to the upper MOSFET source and lower MOSFET drain, acting as the UGATE driver sink and sensing the lower MOSFET voltage drop for overcurrent protection."
      },
      {
        "number": "3",
        "name": "UGATE",
        "type": "output",
        "description": "Drives the gate of the upper MOSFET with PWM-controlled gate drive and is monitored by the adaptive shoot-through protection circuitry."
      },
      {
        "number": "4",
        "name": "LGATE/OCSET",
        "type": "output",
        "description": "Drives the gate of the lower MOSFET from VCC with PWM-controlled gate drive and sets the overcurrent threshold through a resistor to GND during POR or shutdown release."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Signal and power ground for the IC, to be tied to the ground island or plane through the lowest impedance connection available."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Provides the bias supply for the controller and the lower MOSFET gate, to be connected to a well-decoupled 5V to 12V supply."
      },
      {
        "number": "7",
        "name": "COMP/EN",
        "type": "bidirectional",
        "description": "Multiplexed pin that is the error amplifier output during soft-start and normal operation, and pulling it low to the 0.7V nominal enable threshold disables the controller."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the internal error amplifier, fed from a resistor divider from VOUT to set the regulation voltage."
      },
      {
        "number": "9",
        "name": "VOS",
        "type": "input",
        "description": "Monitors the regulator output for OV and UV protection and PGOOD using a divider from VOUT with the same ratio as the FB divider, and has a small pull-up bias current."
      },
      {
        "number": "10",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain pull-down output reflecting the PGOOD comparator state, requiring an external pull-up to a 6V supply and held low through the soft-start ramp."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives a 10-lead TDFN (L10.3x3B) pinout that matches TDFN-10-EP(3x3). The exposed metal"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0217,
        "at": "2026-10-31T18:43:13"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/b4a3c36ea2d8072d62c081774e7cbf53.pdf",
        "pages": 18,
        "sha256": "27f68b4d5075c3ec",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "isl6341crz-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "isl6341crz-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c92b722518c0669525b184330ff260c179388e7fe3b1ed98b0f95c9b624837d3",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}