Generated by kicad-footprint-generator · KiCad file format 20260206
ISL60002DIH310Z-T7A
RENESAS · Voltage References · SOT-23-3
ISL60002DIH310Z-T7A from RENESAS, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the ISL60002-10 variant (this MPN's VOUT = 1.024V) is specified for a supply range of 2.7V to 5.5V, with absolute maximum VIN to GND of -0.5V to +6.5V. |
| 2 | VOUT | power_out | Voltage reference output, specified for ISOURCE and ISINK of 7mA, with absolute maximum VOUT to GND (10s) of -0.5V to +VOUT + 1V. |
| 3 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOT-23-3 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VOUT Accuracy (ISL60002D10, ±5.0mV grade) | VOA | -5 | 5 | mV | TA = +25°C | 5 | |
| Input Voltage Range | VIN | 2.7 | 5.5 | V | 5 | ||
| Supply Current | IIN | 350 | 900 | nA | 9 | ||
| Line Regulation | ΔVOUT/ΔVIN | 80 | 250 | µV/V | +2.7V ≤ VIN ≤ +5.5V | 9 | |
| Load Regulation (sourcing) | ΔVOUT/ΔIOUT | 25 | 100 | µV/mA | 0mA ≤ ISOURCE ≤ 7mA | 9 | |
| Load Regulation (sinking) | ΔVOUT/ΔIOUT | 50 | 150 | µV/mA | -7mA ≤ ISINK ≤ 0mA | 9 | |
| Output Voltage Temperature Coefficient | TC VOUT | 20 | ppm/°C | Box method, -40°C to +85°C | 9 | ||
| Thermal Hysteresis | ΔVOUT/ΔTA | 100 | ppm | ΔTA = +125°C | 9 | ||
| Long Term Stability | ΔVOUT/Δt | 50 | ppm | TA = +25°C; first 1khrs | 9 | ||
| Short-Circuit Current (to GND) | ISC | 50 | mA | TA = +25°C | 9 | ||
| Recommended Operating Temperature Range (Industrial) | -40 | 85 | °C | 5 | |||
| Maximum Voltage VIN to GND | VIN | -0.5 | 6.5 | V | to GND | 5 | |
| Maximum Voltage VOUT to GND (10s) | VOUT | -0.5 | V | 10s; upper limit printed as +VOUT + 1V | 5 | ||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Maximum Junction Temperature (Plastic Package) | 107 | °C | 5 | ||||
| ESD Rating, Human Body Model | 5.5 | kV | Human Body Model | 5 | |||
| Output Voltage Noise | VN | 30 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 9 | ||
| Thermal Resistance, Junction-to-Ambient (3 Ld SOT-23) | θJA | 275 | °C/W | Typical; Notes 7, 8 (high-effective thermal conductivity test board) | 5 | ||
| Thermal Resistance, Junction-to-Case (3 Ld SOT-23) | θJC | 110 | °C/W | Typical; case temp at package top center (Note 8) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Jan 14, 2019 23.00 Page 1 Features - corrected ESD rating listed as 5.5V (Human Body Model) to 5.5kV. Changed the ESD HBM in Abs Max section on page 5 from 5500V to 5.5kV. | 38 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ISL60002DIH310Z-T7A - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
isl60002dih310z-t7a-etched.step/isl60002dih310z-t7a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl60002dih310z-t7a.step/isl60002dih310z-t7a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (40 pp, sha256
7624b5f1613c5f4d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).