component

ISL55001IBZ

Public Made by Adom

by adom

RENESAS Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterface icsisl55001ibzfactory-2.0.0extractor-text

Verified ISL55001IBZ

by Ray · last 30 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 1 record

30 Oct 2026RayPublished by the parts factory: tier mfr, 8 pinsfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: ISL55001IBZ · SOIC-8 · 8 pins
  • ✓copper: 8 copper pads, none touching another net
  • ✓datasheet: all 8 pin names found in the 12-page datasheet
  • ✓distributor: lcsc C1347031, digikey ISL55001IBZ-ND, mouser 968-ISL55001IBZ
  • ✓family: SOIC-8_3.9x4.9mm_P1.27mm
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-6jcaw5oq/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • ✓package_fit: height and body within the datasheet's package drawing (datasheet p.12)
  • ✓pads: 8 pins = 8 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 8 pins agree
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ isl55001ibz.kicad_sym✓ isl55001ibz.kicad_mod✓ isl55001ibz.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
isl55001ibz / README.md
History Download
Ray Publish 0.1.0 f668501 11d ago

ISL55001IBZ

RENESAS · Pre-ordered Chips · SOIC-8

ISL55001IBZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No-connect pin with no function stated in the datasheet.
2 IN- input Inverting input; for a gain of +1 the output is shorted directly to this pin, and the feedback resistor should be placed very close to it to keep parasitic capacitance low.
3 IN+ input Non-inverting input whose common-mode range runs from 1.5V above VS- to 1.5V below VS+, and signals outside that range distort the output.
4 VS- power_in Negative supply pin, with a dual-supply range of ±2.25V to ±15V or single-supply range of 4.5V to 30V per the PSOR specification, and should be bypassed with a 4.7µF tantalum plus 0.1µF ceramic capacitor.
5 NC unconnected No-connect pin with no function stated in the datasheet.
6 OUT output Amplifier output with no internal short-circuit protection; the output current should never exceed ±60mA for maximum reliability.
7 VS+ power_in Positive supply pin, with the device rated for supplies up to ±15V dual or 30V single, and should be bypassed with a 4.7µF tantalum plus 0.1µF ceramic capacitor to ground.
8 NC unconnected No-connect pin with no function stated in the datasheet.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Interface ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 0.06 3 mV VS = ±15V, RL = 1k, TA = +25°C (DC table default) 2
Input Bias Current IB 1.72 3.5 µA VS = ±15V, RL = 1k, TA = +25°C (DC table default) 2
Input Offset Current IOS 0.27 1.5 µA VS = ±15V, RL = 1k, TA = +25°C (DC table default) 2
Open-loop Gain AVOL 10 17 kV/V VOUT = ±10V, RL = 1k 2
Power Supply Rejection Ratio PSRR 75 90 dB VS = ±5V to ±15V 2
Common-mode Rejection Ratio CMRR 70 90 dB VCM = ±10V, VOUT = 0V 2
Output Voltage Swing (positive, RL = 1k) VOUT 13.25 13.5 V VO+, RL = 1k 2
Output Voltage Swing (negative, RL = 1k) VOUT -12.6 -12.8 V VO-, RL = 1k 2
Output Voltage Swing (positive, RL = 150) VOUT 10.7 11.5 V VO+, RL = 150 2
Output Voltage Swing (negative, RL = 150) VOUT -8.8 -9.9 V VO-, RL = 150 2
Output Short Circuit Current ISC 120 145 mA 2
Supply Current IS 8.3 9.25 mA No load (VS = ±15V, DC table default) 2
Input Resistance RIN 2 2.75 M 2
Power Supply Operating Range (dual supply) PSOR 2.25 15 V Dual supply (printed ±2.25 and ±15) 2
Power Supply Operating Range (single supply) PSOR 4.5 30 V Single supply 2
Slew Rate SR 250 280 V/µs VS = ±15V, AV = +1, RL = 100 (rising edge) 2
Supply Voltage VS 16.5 V TA = +25°C; printed as ±16.5V (dual supply) 2
Supply Voltage (single supply) VS 33 V TA = +25°C; printed as 33V 2
Differential Input Voltage dVIN -10 10 V TA = +25°C; printed as ±10V 2
ESD Rating Human Body Model 3 kV TA = +25°C 2
ESD Rating Machine Model 250 V TA = +25°C 2
Continuous Output Current 60 mA TA = +25°C 2
Operating Junction Temperature TJ 150 °C 2
Storage Temperature TST -65 150 °C 2
Operating Temperature Range TA -40 85 °C 2
Thermal Resistance, Junction-to-Ambient (SO8) θJA 120 °C/W SO8, JEDEC JESD51-7 high effective thermal conductivity test board (from power dissipation curve note) 7

CAD (KiCad official)

  • Symbol: ISL55001IBZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: isl55001ibz-etched.step / isl55001ibz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl55001ibz.step / isl55001ibz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (12 pp, sha256 8e02c1c37ea133e7, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF