main
Ray
Publish 0.1.0
823081c
ISL3295EIHZ-T
Intersil(Renesas Electronics) · RS-485/RS-422 ICs · SOT-23-6
ISL3295EIHZ-T from Intersil(Renesas Electronics), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DI | input | Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces Y high and Z low. |
| 2 | VCC | power_in | System power supply input, 3.0V to 5.5V; power up VCC first on devices whose VL pin is powered from a separate supply. |
| 3 | DE | input | Driver output enable: Y and Z are enabled when DE is high and are high impedance when DE is low; if the enable function is not needed, connect DE to VCC through a 1kΩ to 3kΩ resistor. |
| 4 | Z | output | Inverting RS-485/422 transmitter output, ESD protected to ±15kV HBM and ±7kV IEC61000 (contact method). |
| 5 | GND | power_in | Ground connection; this is the device ground reference. |
| 6 | Y | output | Noninverting RS-485/422 transmitter output, ESD protected to ±15kV HBM and ±7kV IEC61000 (contact method). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC | VCC | 3 | 5.5 | V | System power supply input (pin description) | 2 | |
| Operating temperature range, I suffix | -40 | 85 | °C | I suffix | 5 | ||
| VCC to GND | VCC | -0.3 | 7 | V | 5 | ||
| Input voltages DI, DE | -0.3 | 7 | V | DI, DE | 5 | ||
| Output voltages Y, Z | -8 | 13 | V | VCC ≤ 3.6V | 5 | ||
| Output voltages Y, Z | -0.5 | V | VCC > 3.6V; upper limit printed as VCC +0.5V | 5 | |||
| Maximum junction temperature (plastic package) | 150 | °C | 5 | ||||
| Maximum storage temperature range | -65 | 150 | °C | 5 | |||
| Driver differential VOUT, RS-422 load | VOD | 2 | 2.3 | V | RL = 100Ω (RS-422), Figure 4A; VCC ≥ 3.15V | 5 | |
| Driver differential VOUT, RS-422 load | VOD | 3 | 3.8 | V | RL = 100Ω (RS-422), Figure 4A; VCC ≥ 4.5V | 5 | |
| Driver differential VOUT, RS-485 load | VOD | 1.5 | 2 | V | RL = 54Ω (RS-485), Figure 4A; VCC ≥ 3.0V; max printed as VCC | 5 | |
| Driver differential VOUT, RS-485 load | VOD | 2.5 | 3.4 | V | RL = 54Ω (RS-485), Figure 4A; VCC ≥ 4.5V; max printed as VCC | 5 | |
| Driver differential VOUT with common-mode load | VOD | 1.5 | V | RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4B); typ printed as 2, 3.4 | 5 | ||
| Change in magnitude of driver differential VOUT for complementary output states | VOD | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 4A) | 5 | |
| Driver common-mode VOUT | VOC | 2 | 3 | V | RL = 54Ω or 100Ω (Figure 4A); VCC ≤ 3.6V | 5 | |
| Driver common-mode VOUT | VOC | 3.2 | V | RL = 54Ω or 100Ω (Figure 4A); VCC ≤ 5.5V | 5 | ||
| Change in magnitude of driver common-mode VOUT for complementary output states | VOC | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 4A) | 5 | |
| Input high voltage (DI, DE) | VIH1 | 2.2 | V | VL = VCC; VCC ≤ 3.6V | 5 | ||
| Input high voltage (DI, DE) | VIH2 | 3 | V | VCC ≤ 5.5V | 5 | ||
| Input low voltage (DI, DE) | VIL1 | 0.8 | V | VL = VCC (printed for ISL3296E/97E/98E) | 6 | ||
| Logic input current | IIN | -2 | 2 | µA | DI = DE = 0V or VCC (Note 11) | 6 | |
| Output leakage current (Y, Z) | IOZ | 0.1 | 40 | µA | DE = 0V, VCC = 0V, 3.6V or 5.5V; VIN = 12V | 6 | |
| Output leakage current (Y, Z) | IOZ | -40 | -10 | µA | DE = 0V, VCC = 0V, 3.6V or 5.5V; VIN = -7V | 6 | |
| Driver short-circuit current, VO = high or low | IOSD1 | -250 | 250 | mA | DE = VCC, -7V ≤ VO ≤ 12V, VCC ≤ 3.6V (Note 9) | 6 | |
| Driver short-circuit current, VO = high or low | IOSD1 | -450 | 450 | mA | DE = VCC, 0V ≤ VO ≤ VCC, VCC > 3.6V (Note 13) | 6 | |
| No-load supply current | ICC | 120 | 150 | µA | DI = 0V or VCC, DE = VCC | 6 | |
| Shutdown supply current | ISHDN | 0.01 | 1 | µA | DE = 0V, DI = 0V or VCC | 6 | |
| ESD, RS-485 pins (Y, Z) Human Body Model | -16.5 | 16.5 | kV | From bus pins to GND, 25°C | 6 | ||
| ESD, RS-485 pins (Y, Z) IEC61000 contact | -7 | 7 | kV | From bus pins to GND (contact method), 25°C | 6 | ||
| ESD, all pins HBM | -8 | 8 | kV | Per MIL-STD-883 Method 3015, 25°C | 6 | ||
| ESD, machine model | -400 | 400 | V | 25°C | 6 | ||
| Maximum data rate (20Mbps version) | fMAX | 20 | Mbps | VOD = ±1.5V, CD = 360pF (Figure 7) | 7 | ||
| Driver single-ended output delay | tSD | 15 | 42 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC; typ printed as 29, 23 | 7 | |
| Part-to-part output delay skew | tSKPP | 25 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5, Note 10) | 7 | ||
| Driver single-ended output skew | tSSK | 3 | 7 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC | 7 | |
| Driver differential output delay | tDD | 42 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC; typ printed as 29, 22 | 7 | ||
| Driver differential output skew | tDSK | 0.5 | 3 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC ≤ 3.6V | 7 | |
| Driver differential rise or fall time | tR, tF | 9 | 15 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC | 7 | |
| Driver enable to output high | tZH | 250 | ns | RL = 500Ω, CL = 50pF, SW = GND (Figure 6) | 7 | ||
| Driver enable to output low | tZL | 250 | ns | RL = 500Ω, CL = 50pF, SW = VCC (Figure 6) | 7 | ||
| Driver disable from output high | tHZ | 60 | ns | RL = 500Ω, CL = 50pF, SW = GND (Figure 6) | 7 | ||
| Driver disable from output low | tLZ | 60 | ns | RL = 500Ω, CL = 50pF, SW = VCC (Figure 6) | 7 | ||
| Thermal resistance, junction to ambient, 6 Ld SOT-23 | θJA | 177 | °C/W | Typical; Note 5 test board, free air | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ISL3295EIHZ-T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
isl3295eihz-t-etched.step/isl3295eihz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl3295eihz-t.step/isl3295eihz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (17 pp, sha256
6293e8594b781ae5, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# ISL3295EIHZ-T
**Intersil(Renesas Electronics)** · RS-485/RS-422 ICs · SOT-23-6
ISL3295EIHZ-T from Intersil(Renesas Electronics), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DI | input | Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces Y high and Z low. |
| 2 | VCC | power_in | System power supply input, 3.0V to 5.5V; power up VCC first on devices whose VL pin is powered from a separate supply. |
| 3 | DE | input | Driver output enable: Y and Z are enabled when DE is high and are high impedance when DE is low; if the enable function is not needed, connect DE to VCC through a 1kΩ to 3kΩ resistor. |
| 4 | Z | output | Inverting RS-485/422 transmitter output, ESD protected to ±15kV HBM and ±7kV IEC61000 (contact method). |
| 5 | GND | power_in | Ground connection; this is the device ground reference. |
| 6 | Y | output | Noninverting RS-485/422 transmitter output, ESD protected to ±15kV HBM and ±7kV IEC61000 (contact method). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC | VCC | 3 | | 5.5 | V | System power supply input (pin description) | 2 |
| Operating temperature range, I suffix | | -40 | | 85 | °C | I suffix | 5 |
| VCC to GND | VCC | -0.3 | | 7 | V | | 5 |
| Input voltages DI, DE | | -0.3 | | 7 | V | DI, DE | 5 |
| Output voltages Y, Z | | -8 | | 13 | V | VCC ≤ 3.6V | 5 |
| Output voltages Y, Z | | -0.5 | | | V | VCC > 3.6V; upper limit printed as VCC +0.5V | 5 |
| Maximum junction temperature (plastic package) | | | | 150 | °C | | 5 |
| Maximum storage temperature range | | -65 | | 150 | °C | | 5 |
| Driver differential VOUT, RS-422 load | VOD | 2 | 2.3 | | V | RL = 100Ω (RS-422), Figure 4A; VCC ≥ 3.15V | 5 |
| Driver differential VOUT, RS-422 load | VOD | 3 | 3.8 | | V | RL = 100Ω (RS-422), Figure 4A; VCC ≥ 4.5V | 5 |
| Driver differential VOUT, RS-485 load | VOD | 1.5 | 2 | | V | RL = 54Ω (RS-485), Figure 4A; VCC ≥ 3.0V; max printed as VCC | 5 |
| Driver differential VOUT, RS-485 load | VOD | 2.5 | 3.4 | | V | RL = 54Ω (RS-485), Figure 4A; VCC ≥ 4.5V; max printed as VCC | 5 |
| Driver differential VOUT with common-mode load | VOD | 1.5 | | | V | RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4B); typ printed as 2, 3.4 | 5 |
| Change in magnitude of driver differential VOUT for complementary output states | VOD | | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 4A) | 5 |
| Driver common-mode VOUT | VOC | | 2 | 3 | V | RL = 54Ω or 100Ω (Figure 4A); VCC ≤ 3.6V | 5 |
| Driver common-mode VOUT | VOC | | | 3.2 | V | RL = 54Ω or 100Ω (Figure 4A); VCC ≤ 5.5V | 5 |
| Change in magnitude of driver common-mode VOUT for complementary output states | VOC | | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 4A) | 5 |
| Input high voltage (DI, DE) | VIH1 | 2.2 | | | V | VL = VCC; VCC ≤ 3.6V | 5 |
| Input high voltage (DI, DE) | VIH2 | 3 | | | V | VCC ≤ 5.5V | 5 |
| Input low voltage (DI, DE) | VIL1 | | | 0.8 | V | VL = VCC (printed for ISL3296E/97E/98E) | 6 |
| Logic input current | IIN | -2 | | 2 | µA | DI = DE = 0V or VCC (Note 11) | 6 |
| Output leakage current (Y, Z) | IOZ | | 0.1 | 40 | µA | DE = 0V, VCC = 0V, 3.6V or 5.5V; VIN = 12V | 6 |
| Output leakage current (Y, Z) | IOZ | -40 | -10 | | µA | DE = 0V, VCC = 0V, 3.6V or 5.5V; VIN = -7V | 6 |
| Driver short-circuit current, VO = high or low | IOSD1 | -250 | | 250 | mA | DE = VCC, -7V ≤ VO ≤ 12V, VCC ≤ 3.6V (Note 9) | 6 |
| Driver short-circuit current, VO = high or low | IOSD1 | -450 | | 450 | mA | DE = VCC, 0V ≤ VO ≤ VCC, VCC > 3.6V (Note 13) | 6 |
| No-load supply current | ICC | | 120 | 150 | µA | DI = 0V or VCC, DE = VCC | 6 |
| Shutdown supply current | ISHDN | | 0.01 | 1 | µA | DE = 0V, DI = 0V or VCC | 6 |
| ESD, RS-485 pins (Y, Z) Human Body Model | | -16.5 | | 16.5 | kV | From bus pins to GND, 25°C | 6 |
| ESD, RS-485 pins (Y, Z) IEC61000 contact | | -7 | | 7 | kV | From bus pins to GND (contact method), 25°C | 6 |
| ESD, all pins HBM | | -8 | | 8 | kV | Per MIL-STD-883 Method 3015, 25°C | 6 |
| ESD, machine model | | -400 | | 400 | V | 25°C | 6 |
| Maximum data rate (20Mbps version) | fMAX | 20 | | | Mbps | VOD = ±1.5V, CD = 360pF (Figure 7) | 7 |
| Driver single-ended output delay | tSD | 15 | | 42 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC; typ printed as 29, 23 | 7 |
| Part-to-part output delay skew | tSKPP | | | 25 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5, Note 10) | 7 |
| Driver single-ended output skew | tSSK | | 3 | 7 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC | 7 |
| Driver differential output delay | tDD | | | 42 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC; typ printed as 29, 22 | 7 |
| Driver differential output skew | tDSK | | 0.5 | 3 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC ≤ 3.6V | 7 |
| Driver differential rise or fall time | tR, tF | | 9 | 15 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC | 7 |
| Driver enable to output high | tZH | | | 250 | ns | RL = 500Ω, CL = 50pF, SW = GND (Figure 6) | 7 |
| Driver enable to output low | tZL | | | 250 | ns | RL = 500Ω, CL = 50pF, SW = VCC (Figure 6) | 7 |
| Driver disable from output high | tHZ | | | 60 | ns | RL = 500Ω, CL = 50pF, SW = GND (Figure 6) | 7 |
| Driver disable from output low | tLZ | | | 60 | ns | RL = 500Ω, CL = 50pF, SW = VCC (Figure 6) | 7 |
| Thermal resistance, junction to ambient, 6 Ld SOT-23 | θJA | | 177 | | °C/W | Typical; Note 5 test board, free air | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `ISL3295EIHZ-T`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `isl3295eihz-t-etched.step` / `isl3295eihz-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl3295eihz-t.step` / `isl3295eihz-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Intersil(Renesas Electronics) datasheet](docs/isl3295eihz-t-datasheet.pdf) (17 pp, sha256 `6293e8594b781ae5`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/isl3295eihz-t-datasheet.pdf)