3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISL3171EIBZ
RENESAS · Pre-ordered Chips · SOIC-8
ISL3171EIBZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | System power supply input, 3.0V to 3.6V. |
| 2 | RO | output | Receiver output: high if A-B ≥ -50mV, low if A-B ≤ -200mV, and high if A and B are floating or shorted. |
| 3 | DI | input | Driver input: a low forces Y low and Z high, a high forces Y high and Z low. |
| 4 | GND | power_in | Ground connection. |
| 5 | Y | output | ±15kV IEC61000 ESD protected RS-485/422 level, noninverting driver output. |
| 6 | Z | output | ±15kV IEC61000 ESD protected RS-485/422 level, inverting driver output. |
| 7 | B | input | ±15kV IEC61000 ESD protected RS-485/422 level, inverting receiver input. |
| 8 | A | input | ±15kV IEC61000 ESD protected RS-485/422 level, noninverting receiver input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver Differential Output Voltage (RS-422) | VOD | 2 | 2.3 | V | RL = 100Ω (RS-422) (Figure 4A, Note 16) | 7 | |
| Driver Differential Output Voltage (RS-485) | VOD | 1.5 | 2 | V | RL = 54Ω (RS-485) (Figure 4A) | 7 | |
| Driver Differential Output Voltage, -7V≤VCM≤12V | VOD | 1.5 | 2.2 | V | RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4B) | 7 | |
| Change in Magnitude of Driver Differential VOUT for Complementary Output States | VOD | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 4A) | 7 | |
| Driver Common-Mode VOUT | VOC | 2 | 3 | V | RL = 54Ω or 100Ω (Figure 4A) | 7 | |
| Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States | VOC | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 4A) | 7 | |
| Logic Input High Voltage | VIH | 2 | V | DI, DE, RE | 7 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | DI, DE, RE | 7 | ||
| Logic Input Current | IIN1 | -2 | 2 | µA | DI = DE = RE = 0V or VCC (Note 18) | 7 | |
| Input Current (A, B, A/Y, B/Z) | IIN2 | 80 | 125 | µA | DE = 0V, VCC = 0V or 3.6V; VIN = 12V | 7 | |
| Input Current (A, B, A/Y, B/Z) | IIN2 | -100 | -50 | µA | DE = 0V, VCC = 0V or 3.6V; VIN = -7V | 7 | |
| Driver Short-Circuit Current, VO = High or Low | IOSD1 | -250 | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V (Note 7) | 7 | |
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V ≤ VCM ≤ 12V | 7 |
| Receiver Output Low Voltage | VOL | 0.17 | 0.4 | V | IO = -4mA, VID = -200mV | 8 | |
| Receiver Input Resistance | RIN | 96 | 150 | kΩ | -7V ≤ VCM ≤ 12V | 8 | |
| Receiver Short-Circuit Current | IOSR | -7 | 30 | 60 | mA | 0V ≤ VO ≤ VCC | 8 |
| No-Load Supply Current | ICC | 510 | 800 | µA | DI = 0V or VCC; DE = VCC, RE = 0V or VCC | 8 | |
| No-Load Supply Current | ICC | 480 | 700 | µA | DE = 0V, RE = 0V | 8 | |
| Maximum Data Rate (250kbps block) | fMAX | 250 | 800 | kbps | VOD = ±1.5V, CD = 820pF (Figure 7, Note 17) | 8 | |
| Driver Differential Output Delay (250kbps block) | tDD | 250 | 1100 | 1500 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5) | 8 |
| Driver Differential Output Skew (250kbps block) | tSKEW | 6 | 100 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5) | 8 | |
| Driver Differential Rise or Fall Time (250kbps block) | tR, tF | 350 | 960 | 1600 | ns | RDIFF = 54Ω, CD = 50pF (Figure 5) | 8 |
| Maximum Data Rate (receiver, ISL3170E-75E) | fMAX | 12 | 20 | Mbps | VID = ±1.5V (Note 17) | 9 | |
| Receiver Input to Output Delay (ISL3170E-75E) | tPLH, tPHL | 25 | 70 | 120 | ns | (Figure 8) | 9 |
| Receiver Skew /tPLH - tPHL/ (ISL3170E-75E) | tSKD | 1.5 | 4 | ns | (Figure 8) | 9 | |
| VCC to GND | 7 | V | 7 | ||||
| Input Voltage DI | -0.3 | 7 | V | 7 | |||
| Input Voltage DE, RE | -0.3 | 7 | V | Note 20 | 7 | ||
| Input/Output Voltage A, B, Y, Z | -8 | 13 | V | 7 | |||
| Input/Output Voltage RO | -0.3 | V | upper limit printed as VCC +0.3V | 7 | |||
| Operating Temperature Range | -40 | 85 | °C | 7 | |||
| Supply Voltage VCC | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.0V to 3.6V; unless otherwise specified | 7 |
| Maximum Storage Temperature Range | -65 | 150 | °C | 7 | |||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 7 | ||||
| Thermal Resistance, Junction to Ambient, 8 Ld SOIC | θJA | 105 | °C/W | Typical, Note 4 | 7 |
CAD (KiCad official)
- Symbol:
ISL3171EIBZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl3171eibz-etched.step/isl3171eibz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl3171eibz.step/isl3171eibz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (24 pp, sha256
a078fda83c895dae, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).