Generated by kicad-footprint-generator · KiCad file format 20260206
ISL3155EIBZ-T7A
RENESAS · RS-485/RS-422 ICs · SOIC-8
ISL3155EIBZ-T7A from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high if A-B ≥ -50mV and low if A-B ≤ -200mV, and is fail-safe high if A and B are unconnected (open) or shorted. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled by bringing DE high and are high impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces output Y high and output Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output; the pin is an input if DE = 0 and an output if DE = 1. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output; the pin is an input if DE = 0 and an output if DE = 1. |
| 8 | VCC | power_in | System power supply input, 4.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC to Ground | VCC | 7 | V | 6 | |||
| Input voltages at DI, DE, RE | -0.3 | V | Max printed as VCC + 0.3 V | 6 | |||
| Bus I/O voltages at A/Y, B/Z, A, B, Y, Z | -9 | 13 | V | 6 | |||
| Transient pulse voltages through 100Ω at A/Y, B/Z, A, B, Y, Z | -100 | 100 | V | Through 100Ω; ±100V for 15µs at 1% duty (Note 5) | 6 | ||
| RO output voltage | -0.3 | V | Max printed as VCC + 0.3 V | 6 | |||
| Maximum junction temperature (plastic package) | 150 | °C | 6 | ||||
| Maximum storage temperature range | -65 | 150 | °C | 6 | |||
| Supply voltage | VCC | 4.5 | 5.5 | V | 6 | ||
| Temperature range | TA | -40 | 85 | °C | 6 | ||
| Bus pin common-mode voltage range | VCM | -7 | 12 | V | 6 | ||
| Driver differential output voltage (loaded, RS-422) | VOD2 | 2.8 | 3.6 | V | RL = 100Ω (RS-422) (Figure 3), Full temp range | 7 | |
| Driver differential output voltage (loaded, RS-485) | VOD2 | 2.4 | 3.1 | V | RL = 54Ω (RS-485) (Figure 3), Full temp range; max printed as VCC | 7 | |
| Driver differential output voltage (common-mode load) | VOD2 | 2.4 | 3 | V | RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4), Full temp range | 7 | |
| Change in magnitude of driver differential output voltage | ΔVOD | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 3), Full temp range | 7 | |
| Driver common-mode output voltage | VOC | 3.15 | V | RL = 54Ω or 100Ω (Figure 3), Full temp range | 7 | ||
| Change in magnitude of driver common-mode output voltage | ΔVOC | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 3), Full temp range | 7 | |
| Logic input high voltage | VIH | 2 | V | DE, DI, RE, Full temp range | 7 | ||
| Logic input low voltage | VIL | 0.8 | V | DE, DI, RE, Full temp range | 7 | ||
| Logic input current | IIN1 | -2 | 2 | µA | DE, DI, RE, Full temp range | 7 | |
| Input current (A, B, A/Y, B/Z) at VIN = 12V | IIN2 | 70 | 125 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = 12V, Full temp range | 7 | |
| Input current (A, B, A/Y, B/Z) at VIN = -7V | IIN2 | -75 | 55 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = -7V, Full temp range | 7 | |
| Driver short-circuit current, VO = high or low | IOSD1 | -250 | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V (Note 9), Full temp range | 7 | |
| Receiver differential threshold voltage | VTH | -200 | -90 | -50 | mV | -7V ≤ VCM ≤ 12V, Full temp range | 7 |
| Receiver output low voltage | VOL | 0.25 | 0.4 | V | IO = -8mA, VID = -200mV, Full temp range | 7 | |
| Receiver output low current | IOL | 20 | 28 | mA | VO = 1V, VID = -200mV, Full temp range | 7 | |
| Three-state (high impedance) receiver output current | IOZR | -1 | 0.03 | 1 | µA | 0.4V ≤ VO ≤ 2.4V, Full temp range | 7 |
| Receiver input resistance | RIN | 96 | 160 | kΩ | -7V ≤ VCM ≤ 12V, Full temp range | 7 | |
| Receiver short-circuit current | IOSR | -7 | 65 | 85 | mA | 0V ≤ VO ≤ VCC, Full temp range | 7 |
| No-load supply current (half duplex) | ICC | 650 | 800 | µA | Half duplex versions, DE = VCC, RE = X, DI = 0V or VCC, Full temp range | 8 | |
| No-load supply current (all versions, driver disabled) | ICC | 550 | 700 | µA | All versions, DE = 0V, RE = 0V, DI = 0V or VCC, Full temp range | 8 | |
| Shutdown supply current | ISHDN | 0.07 | 3 | µA | DE = 0V, RE = VCC, DI = 0V or VCC, Full temp range | 8 | |
| ESD IEC61000-4-2 air-gap discharge, RS-485 pins (half duplex) | -16.5 | 16.5 | kV | IEC61000-4-2 air-gap discharge method, half duplex, +25°C | 8 | ||
| ESD Human Body Model, bus pins to GND | -16.5 | 16.5 | kV | Human body model, from bus pins to GND, +25°C | 8 | ||
| Driver differential output skew (1Mbps) | tSKEW | 3 | 10 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5), Full temp range | 9 | |
| Driver differential rise or fall time (1Mbps) | tR, tF | 150 | 325 | 450 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5), Full temp range | 9 |
| Maximum data rate (driver, 1Mbps) | fMAX | 1 | 8 | Mbps | CD = 820pF (Figure 7, Note 17), Full temp range | 9 | |
| Driver enable to output high (1Mbps) | tZH | 110 | 200 | ns | RL = 500Ω, CL = 100pF, SW = GND (Figure 6, Note 10), Full temp range | 9 | |
| Driver enable to output low (1Mbps) | tZL | 60 | 200 | ns | RL = 500Ω, CL = 100pF, SW = VCC (Figure 6, Note 10), Full temp range | 9 | |
| Driver disable from output low (1Mbps) | tLZ | 50 | 65 | ns | RL = 500Ω, CL = 15pF, SW = VCC (Figure 6), Full temp range | 9 | |
| Driver disable from output high (1Mbps) | tHZ | 35 | 60 | ns | RL = 500Ω, CL = 15pF, SW = GND (Figure 6), Full temp range | 9 | |
| Time to shutdown (driver, 1Mbps) | tSHDN | 60 | 160 | 600 | ns | Note 12, Full temp range | 9 |
| Driver enable from shutdown to output high (1Mbps) | tZH(SHDN) | 250 | ns | RL = 500Ω, CL = 100pF, SW = GND (Figure 6, Notes 12, 13), Full temp range | 9 | ||
| Driver enable from shutdown to output low (1Mbps) | tZL(SHDN) | 250 | ns | RL = 500Ω, CL = 100pF, SW = VCC (Figure 6, Notes 12, 13), Full temp range | 9 | ||
| Maximum data rate (receiver, 115kbps and 1Mbps versions) | fMAX | 1 | 12 | Mbps | Figure 8, Note 17, Full temp range | 10 | |
| Receiver skew /tPLH - tPHL/ | tSKD | 4 | 10 | ns | Figure 8, Full temp range | 10 | |
| Receiver enable to output low | tZL | 9 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9, Note 11), Full temp range | 10 | |
| Receiver enable to output high | tZH | 7 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9, Note 11), Full temp range | 10 | |
| Receiver disable from output low | tLZ | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9), Full temp range | 10 | |
| Receiver disable from output high | tHZ | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9), Full temp range | 10 | |
| Time to shutdown (receiver) | tSHDN | 60 | 160 | 600 | ns | Note 12, Full temp range | 10 |
| Receiver enable from shutdown to output high | tZH(SHDN) | 200 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9, Notes 12, 14), Full temp range | 10 | ||
| Receiver enable from shutdown to output low | tZL(SHDN) | 200 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9, Notes 12, 14), Full temp range | 10 | ||
| Driver differential output voltage (15Ω, eight 120Ω terminations) | VOD2 | 1.65 | V | RL = 15Ω (Eight 120Ω terminations) (Note 16), +25°C | 7 | ||
| DI input hysteresis voltage | VHYS | 100 | mV | +25°C | 7 | ||
| Receiver input hysteresis | ΔVTH | 20 | mV | VCM = 0V, +25°C | 7 | ||
| Receiver output high voltage | VOH | 4.3 | V | IO = -8mA, VID = -50mV, Full temp range; min printed as VCC - 1.2 V | 7 |
CAD (KiCad official)
- Symbol:
ISL3155EIBZ-T7A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl3155eibz-t7a-etched.step/isl3155eibz-t7a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl3155eibz-t7a.step/isl3155eibz-t7a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (34 pp, sha256
fd6ffd89d55abbbc, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).