main
Ray Publish 0.1.0 e8c1f69
{
  "slug": "isl29501irz-t7",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Position Sensor, QFN-24(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "isl29501irz-t7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "isl29501irz-t7.kicad_sym",
    "isl29501irz-t7.kicad_mod",
    "isl29501irz-t7.glb",
    "isl29501irz-t7.step",
    "isl29501irz-t7.lbr",
    "docs/hero.png",
    "docs/isl29501irz-t7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "isl29501irz-t7-hero.glb",
    "isl29501irz-t7-hero.overlay.json",
    "isl29501irz-t7-etched.glb"
  ],
  "component": {
    "mpn": "ISL29501IRZ-T7",
    "manufacturer": "RENESAS",
    "package": "QFN-24(4x5)",
    "pin_count": 25,
    "category": "Sensors",
    "subcategory": "Position Sensor",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c172042571ca55fe3e750e446757b9b5.pdf",
    "parts": {
      "symbol": "isl29501irz-t7.kicad_sym",
      "footprint": "isl29501irz-t7.kicad_mod",
      "model_3d": "isl29501irz-t7-hero.glb",
      "model_3d_plain": "isl29501irz-t7-etched.glb",
      "model_3d_step": "isl29501irz-t7-etched.step",
      "model_3d_step_plain": "isl29501irz-t7.step",
      "lbr": "isl29501irz-t7.lbr"
    },
    "distributor_links": {
      "lcsc": "C695458",
      "digikey": "20-ISL29501IRZ-T7TR-ND",
      "mouser": "968-ISL29501IRZ-T7"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:57:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "20-ISL29501IRZ-T7TR-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "968-ISL29501IRZ-T7",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground; the datasheet says to tie this pin to AVSS."
      },
      {
        "number": "2",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground; the datasheet says to tie this pin to AVSS."
      },
      {
        "number": "3",
        "name": "CEn",
        "type": "input",
        "description": "Chip enable, active low."
      },
      {
        "number": "4",
        "name": "A2",
        "type": "input",
        "description": "I2C address bit; pull to DVCC or DVSS."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data bus."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C clock bus."
      },
      {
        "number": "7",
        "name": "A1",
        "type": "input",
        "description": "I2C ID address bit; pull to DVCC or DVSS."
      },
      {
        "number": "8",
        "name": "IRQ",
        "type": "output",
        "description": "Interrupt, active low, open-drain output to the host; a 2.7kΩ pull-up to supply is required."
      },
      {
        "number": "9",
        "name": "SS",
        "type": "input",
        "description": "Sample start input, active on a HIGH to LOW edge."
      },
      {
        "number": "10",
        "name": "EVSS",
        "type": "power_in",
        "description": "Emitter driver ground; connects to the cathode of the emitter."
      },
      {
        "number": "11",
        "name": "EIR",
        "type": "output",
        "description": "Emitter driver output; connects to the anode of the emitter."
      },
      {
        "number": "12",
        "name": "EVCC",
        "type": "power_in",
        "description": "Emitter driver supply, 2.7V to 3.3V range per the supply spec; decouple with 2.2µF or larger capacitor along with 0.1µF for high frequency."
      },
      {
        "number": "13",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground; the datasheet says to tie this pin to AVSS."
      },
      {
        "number": "14",
        "name": "DVCC",
        "type": "power_in",
        "description": "Digital power supply, 2.7V to 3.3V."
      },
      {
        "number": "15",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital power ground."
      },
      {
        "number": "16",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog power ground."
      },
      {
        "number": "17",
        "name": "AVCC",
        "type": "power_in",
        "description": "Analog power supply, 2.7V to 3.3V."
      },
      {
        "number": "18",
        "name": "VOUT",
        "type": "power_out",
        "description": "AFE LDO output, tied to AVDD; decouple with a 1µF and 0.01µF capacitor pair."
      },
      {
        "number": "19",
        "name": "AVDD",
        "type": "power_in",
        "description": "AFE analog supply; tied to VOUT."
      },
      {
        "number": "20",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground shield."
      },
      {
        "number": "21",
        "name": "PDp",
        "type": "input",
        "description": "Photodiode cathode input."
      },
      {
        "number": "22",
        "name": "PDn",
        "type": "input",
        "description": "Photodiode anode input."
      },
      {
        "number": "23",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground shield."
      },
      {
        "number": "24",
        "name": "RSET",
        "type": "passive",
        "description": "Sets chip bias current; tie to a 10kΩ 1% resistor to AVSS."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed center pad (EPAD) is not a numbered pin and is omitted from pins; the datasheet states i; The pin configuration diagram text is scrambled in the extracted text, so pin numbers were taken fro; Types for AVSS/DVSS/EVSS/supply pins are power_in per the GND/power convention; VOUT is classed powe",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 10,
        "cost_usd": 0.073,
        "at": "2026-10-29T01:56:50"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/c172042571ca55fe3e750e446757b9b5.pdf",
        "pages": 23,
        "sha256": "9b7bcfa0ed5c56be",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "isl29501irz-t7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd34955bd2f41c7d5d4f45257df2b8077e42f694598de69e58ad55ad191eecae",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "isl29501irz-t7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e03753d284648775f37c6213e82a87c617d97ad770a3d728d9033e01edf5797f",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "L24.4x5F",
      "source_page": 22,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 4.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.9,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "isl29501irz-t7.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}