# ISL28413FVZ-T7

**RENESAS** · Operational Amplifier · TSSOP-14

ISL28413FVZ-T7 from RENESAS, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT_A | output | Output of amplifier A. |
| 2 | IN-_A | input | Negative (inverting) input of amplifier A. |
| 3 | IN+_A | input | Positive (non-inverting) input of amplifier A. |
| 4 | VS+ | power_in | Positive supply voltage, 1.8V to 5.5V supply range (6.5V absolute maximum). |
| 5 | IN+_B | input | Positive (non-inverting) input of amplifier B. |
| 6 | IN-_B | input | Negative (inverting) input of amplifier B. |
| 7 | OUT_B | output | Output of amplifier B. |
| 8 | OUT_C | output | Output of amplifier C. |
| 9 | IN-_C | input | Negative (inverting) input of amplifier C. |
| 10 | IN+_C | input | Positive (non-inverting) input of amplifier C. |
| 11 | VS- | power_in | Negative supply voltage (ground in single-supply operation). |
| 12 | IN+_D | input | Positive (non-inverting) input of amplifier D. |
| 13 | IN-_D | input | Negative (inverting) input of amplifier D. |
| 14 | OUT_D | output | Output of amplifier D. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-14 |
| Category | Operational Amplifier/Comparator |
| Pins | 14 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -4 | 0.5 | 4 | mV | TA=+25°C | 4 |
| Input Offset Voltage (over temperature) | VOS | -5 |  | 5 | mV | -40°C to +125°C | 4 |
| Input Offset Current | IOS |  | 1 | 30 | pA |  | 4 |
| Input Bias Current | IB | -20 | 3 | 20 | pA | ISL28213, ISL28413, TA=+25°C | 4 |
| Input Bias Current (over temperature) | IB | -50 |  | 50 | pA | ISL28213, ISL28413, -40°C to +125°C | 4 |
| Common Mode Rejection Ratio | CMRR | 72 |  |  | dB | VCM = -0.1V to 5.1V | 4 |
| Common Mode Rejection Ratio (over temperature) | CMRR | 70 |  |  | dB | -40°C to +125°C | 4 |
| Power Supply Rejection Ratio | PSRR | 71 |  |  | dB | VS = 1.8V to 5.5V | 4 |
| Power Supply Rejection Ratio (over temperature) | PSRR | 70 |  |  | dB | -40°C to +125°C | 4 |
| Output Voltage Swing, High | VOH | 4.985 | 4.993 |  | V | RL = 10kΩ | 4 |
| Output Voltage Swing, High (over temperature) | VOH | 4.98 |  |  | V | RL = 10kΩ, -40°C to +125°C | 4 |
| Output Voltage Swing, Low | VOL |  | 13 | 15 | mV | RL = 10kΩ | 4 |
| Output Voltage Swing, Low (over temperature) | VOL |  |  | 20 | mV | RL = 10kΩ, -40°C to +125°C | 4 |
| Supply Voltage | V+ | 1.8 |  | 5.5 | V |  | 4 |
| Supply Current per Amplifier | IS |  | 90 | 130 | µA | RL = OPEN | 4 |
| Supply Current per Amplifier (over temperature) | IS |  |  | 170 | µA | RL = OPEN, -40°C to +125°C | 4 |
| Supply Turn-on Voltage Slew Rate |  |  |  | 1 | V/µs | TA=+25°C | 4 |
| Differential Input Current |  |  |  | 20 | mA | TA=+25°C | 4 |
| ESD Human Body Model |  |  |  | 4000 | V |  | 4 |
| ESD Machine Model |  |  |  | 400 | V | ISL28413 | 4 |
| ESD Charged Device Model |  |  |  | 2000 | V |  | 4 |
| Ambient Operating Temperature Range |  | -40 |  | 125 | °C |  | 4 |
| Storage Temperature Range |  | -65 |  | 150 | °C |  | 4 |
| Operating Junction Temperature |  |  |  | 125 | °C |  | 4 |
| Thermal Resistance Junction-Ambient | θJA |  | 120 |  | °C/W | 14 Ld TSSOP | 4 |
| Thermal Resistance Junction-Case | θJC |  | 40 |  | °C/W | 14 Ld TSSOP | 4 |
| Input Offset Voltage Temperature Coefficient | TCVOS |  | 5 |  | µV/°C | -40°C to +125°C | 4 |
| Common Mode Input Voltage Range low |  | -0.1 |  |  | V |  | 4 |
| Common Mode Input Voltage Range high |  |  |  | 5.1 | V |  | 4 |
| Input Capacitance | CIN |  | 1 |  | pF |  | 4 |
| Output Source Short Circuit Current | ISC+ |  | -22 |  | mA | RL = 10Ω to V- | 5 |
| Output Sink Short Circuit Current | ISC- |  | 16 |  | mA | RL = 10Ω to V+ | 5 |
| Gain Bandwidth Product | GBWP |  | 2 |  | MHz | VS = ±2.5V, AV = 100, RF = 100kΩ, RG = 1kΩ, RL = 10kΩ to VCM | 5 |
| Slew Rate | SR |  | 1 |  | V/µs | 20% to 80% VOUT, VOUT = 0.5V to 4.5V | 5 |

## CAD (KiCad official)

- Symbol: `ISL28413FVZ-T7`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `isl28413fvz-t7-etched.step` / `isl28413fvz-t7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl28413fvz-t7.step` / `isl28413fvz-t7.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [RENESAS datasheet](docs/isl28413fvz-t7-datasheet.pdf) (23 pp, sha256 `324db1dc6c15db08`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/isl28413fvz-t7-datasheet.pdf)