component
ISL28213FUZ
Public Made by Adomby adom
RENESAS Pre-ordered Chips, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ISL28213FUZ
RENESAS · Pre-ordered Chips · MSOP-8
ISL28213FUZ from RENESAS, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT_A | output | Output of amplifier A, a rail-to-rail output stage that the datasheet describes as Output, Circuit 1. |
| 2 | IN-_A | input | Inverting input of amplifier A (Negative Input, Circuit 3); the input ESD diodes limit the input voltage to one diode beyond the supply rails. |
| 3 | IN+_A | input | Non-inverting input of amplifier A (Positive Input, Circuit 3); the common mode input range extends 100mV beyond each supply rail. |
| 4 | VS- | power_in | Negative supply voltage; the part runs from a single supply of 1.8V to 5.5V or a dual supply of ±0.9V to ±2.75V. |
| 5 | IN+_B | input | Non-inverting input of amplifier B (Positive Input, Circuit 3); the common mode input range extends 100mV beyond each supply rail. |
| 6 | IN-_B | input | Inverting input of amplifier B (Negative Input, Circuit 3); the input ESD diodes limit the input voltage to one diode beyond the supply rails. |
| 7 | OUT_B | output | Output of amplifier B, a rail-to-rail output stage that the datasheet describes as Output, Circuit 1. |
| 8 | VS+ | power_in | Positive supply voltage, 1.8V minimum to 5.5V maximum in single-supply operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | MSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -4 | 0.5 | 4 | mV | 4 | |
| Input Offset Voltage (over temperature) | VOS | -5 | 5 | mV | Boldface limit, -40°C to +125°C | 4 | |
| Input Offset Current | IOS | 1 | 30 | pA | 4 | ||
| Input Bias Current | IB | -20 | 3 | 20 | pA | ISL28213, ISL28413 | 4 |
| Input Bias Current (over temperature) | IB | -50 | 50 | pA | ISL28213, ISL28413 | 4 | |
| Common Mode Input Voltage Range | VCM | -0.1 | 5.1 | V | 4 | ||
| Common Mode Rejection Ratio | CMRR | 72 | dB | VCM = -0.1V to 5.1V | 4 | ||
| Common Mode Rejection Ratio (over temperature) | CMRR | 70 | dB | -40°C to +125°C | 4 | ||
| Power Supply Rejection Ratio | PSRR | 71 | dB | VS = 1.8V to 5.5V | 4 | ||
| Power Supply Rejection Ratio (over temperature) | PSRR | 70 | dB | -40°C to +125°C | 4 | ||
| Output Voltage Swing, High | VOH | 4.985 | 4.993 | V | RL = 10kΩ | 4 | |
| Output Voltage Swing, High (second limit) | VOH | 4.98 | V | 4 | |||
| Output Voltage Swing, Low | VOL | 13 | 15 | mV | RL = 10kΩ | 4 | |
| Output Voltage Swing, Low (over temperature) | VOL | 20 | mV | 4 | |||
| Supply Voltage | V+ | 1.8 | 5.5 | V | 4 | ||
| Supply Current per Amplifier | IS | 90 | 130 | µA | RL = OPEN | 4 | |
| Supply Current per Amplifier (over temperature) | IS | 170 | µA | 4 | |||
| Output Source Short Circuit Current | ISC+ | -22 | mA | RL = 10Ω to V- | 5 | ||
| Output Sink Short Circuit Current | ISC- | 16 | mA | RL = 10Ω to V+ | 5 | ||
| Supply Turn-on Voltage Slew Rate | 1 | V/µs | 4 | ||||
| Differential Input Current | 20 | mA | 4 | ||||
| Ambient Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Operating Junction Temperature | TJ | 125 | °C | 4 | |||
| Thermal Resistance Junction-to-Ambient, 8 Ld MSOP (typical) | θJA | 180 | °C/W | 8 Ld MSOP, Notes 6, 7 | 4 | ||
| Thermal Resistance Junction-to-Case, 8 Ld MSOP (typical) | θJC | 100 | °C/W | 8 Ld MSOP, Notes 6, 7 | 4 |
CAD (KiCad official)
- Symbol:
ISL28213FUZ - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
isl28213fuz-etched.step/isl28213fuz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl28213fuz.step/isl28213fuz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (23 pp, sha256
983a5d0e56da1d2d, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL28213FUZ
**RENESAS** · Pre-ordered Chips · MSOP-8
ISL28213FUZ from RENESAS, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT_A | output | Output of amplifier A, a rail-to-rail output stage that the datasheet describes as Output, Circuit 1. |
| 2 | IN-_A | input | Inverting input of amplifier A (Negative Input, Circuit 3); the input ESD diodes limit the input voltage to one diode beyond the supply rails. |
| 3 | IN+_A | input | Non-inverting input of amplifier A (Positive Input, Circuit 3); the common mode input range extends 100mV beyond each supply rail. |
| 4 | VS- | power_in | Negative supply voltage; the part runs from a single supply of 1.8V to 5.5V or a dual supply of ±0.9V to ±2.75V. |
| 5 | IN+_B | input | Non-inverting input of amplifier B (Positive Input, Circuit 3); the common mode input range extends 100mV beyond each supply rail. |
| 6 | IN-_B | input | Inverting input of amplifier B (Negative Input, Circuit 3); the input ESD diodes limit the input voltage to one diode beyond the supply rails. |
| 7 | OUT_B | output | Output of amplifier B, a rail-to-rail output stage that the datasheet describes as Output, Circuit 1. |
| 8 | VS+ | power_in | Positive supply voltage, 1.8V minimum to 5.5V maximum in single-supply operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | MSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -4 | 0.5 | 4 | mV | | 4 |
| Input Offset Voltage (over temperature) | VOS | -5 | | 5 | mV | Boldface limit, -40°C to +125°C | 4 |
| Input Offset Current | IOS | | 1 | 30 | pA | | 4 |
| Input Bias Current | IB | -20 | 3 | 20 | pA | ISL28213, ISL28413 | 4 |
| Input Bias Current (over temperature) | IB | -50 | | 50 | pA | ISL28213, ISL28413 | 4 |
| Common Mode Input Voltage Range | VCM | -0.1 | | 5.1 | V | | 4 |
| Common Mode Rejection Ratio | CMRR | 72 | | | dB | VCM = -0.1V to 5.1V | 4 |
| Common Mode Rejection Ratio (over temperature) | CMRR | 70 | | | dB | -40°C to +125°C | 4 |
| Power Supply Rejection Ratio | PSRR | 71 | | | dB | VS = 1.8V to 5.5V | 4 |
| Power Supply Rejection Ratio (over temperature) | PSRR | 70 | | | dB | -40°C to +125°C | 4 |
| Output Voltage Swing, High | VOH | 4.985 | 4.993 | | V | RL = 10kΩ | 4 |
| Output Voltage Swing, High (second limit) | VOH | 4.98 | | | V | | 4 |
| Output Voltage Swing, Low | VOL | | 13 | 15 | mV | RL = 10kΩ | 4 |
| Output Voltage Swing, Low (over temperature) | VOL | | | 20 | mV | | 4 |
| Supply Voltage | V+ | 1.8 | | 5.5 | V | | 4 |
| Supply Current per Amplifier | IS | | 90 | 130 | µA | RL = OPEN | 4 |
| Supply Current per Amplifier (over temperature) | IS | | | 170 | µA | | 4 |
| Output Source Short Circuit Current | ISC+ | -22 | | | mA | RL = 10Ω to V- | 5 |
| Output Sink Short Circuit Current | ISC- | | | 16 | mA | RL = 10Ω to V+ | 5 |
| Supply Turn-on Voltage Slew Rate | | | | 1 | V/µs | | 4 |
| Differential Input Current | | | | 20 | mA | | 4 |
| Ambient Operating Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Storage Temperature Range | | -65 | | 150 | °C | | 4 |
| Operating Junction Temperature | TJ | | | 125 | °C | | 4 |
| Thermal Resistance Junction-to-Ambient, 8 Ld MSOP (typical) | θJA | | 180 | | °C/W | 8 Ld MSOP, Notes 6, 7 | 4 |
| Thermal Resistance Junction-to-Case, 8 Ld MSOP (typical) | θJC | | 100 | | °C/W | 8 Ld MSOP, Notes 6, 7 | 4 |
## CAD (KiCad official)
- Symbol: `ISL28213FUZ`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `isl28213fuz-etched.step` / `isl28213fuz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl28213fuz.step` / `isl28213fuz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/isl28213fuz-datasheet.pdf) (23 pp, sha256 `983a5d0e56da1d2d`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl28213fuz-datasheet.pdf)