main
Ray Publish 0.1.0 4f2164d

ISL28213FBZ-HXY

HXY MOSFET · Operational Amplifier · SOP-8

ISL28213FBZ-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUTA output Channel A output, which provides rail-to-rail output swing into heavy loads.
2 -INA input Inverting input of channel A, with input common-mode voltage range of VS- - 0.1 V to VS+ + 0.1 V.
3 +INA input Noninverting input of channel A, with input common-mode voltage range of VS- - 0.1 V to VS+ + 0.1 V.
4 V- power_in Negative (lowest) power supply; the total supply Vs = (V+) - (V-) must stay between 1.5 V and 5.5 V.
5 +INB input Noninverting input of channel B, with input common-mode voltage range of VS- - 0.1 V to VS+ + 0.1 V.
6 -INB input Inverting input of channel B, with input common-mode voltage range of VS- - 0.1 V to VS+ + 0.1 V.
7 OUTB output Channel B output, which provides rail-to-rail output swing into heavy loads.
8 V+ power_in Positive (highest) power supply; the absolute maximum supply voltage is 6 V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage 6 V 3
Signal Input Terminals Current -10 10 mA Note (2) 3
Signal output Terminals Current -200 200 mA Note (3) 3
Operating Temperature Range -55 125 °C 3
Storage Temperature Range -65 150 °C 3
Junction Temperature -40 150 °C 3
Electrostatic discharge Human-Body Model (HBM) V(ESD) -2000 2000 V 3
Electrostatic discharge Charged-Device Model (CDM) V(ESD) -500 500 V 3
Electrostatic discharge Machine Model V(ESD) 100 V 3
Supply voltage, single-supply Vs 1.5 5.5 V Single-supply, Vs=(V+)-(V-) 3
Supply voltage, dual-supply Vs 0.75 2.75 V Dual-supply, printed as ±0.75 to ±2.75 3
Input Offset Voltage VOS -3 1 3 mV 4
Common-Mode Rejection Ratio CMRR 70 80 dB VCM=0.1V to 4V 4
Open-Loop Voltage Gain AV 80 100 dB VOUT=0.1V to 4.9V, RL=100kΩ 4
Power-Supply Rejection Ratio PSRR 80 90 dB VS=1.5V to 5.5V 5
Operating Voltage Range VS 1.5 5.5 V 5
Quiescent Current/Amplifier IQ 28 40 uA IO=0A 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ISL28213FBZ-HXY
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8, generated on the KiCad land (body 3.9 x 4.9 mm, terminals on the pads, 1.4500000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: isl28213fbz-hxy-etched.step / isl28213fbz-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl28213fbz-hxy.step / isl28213fbz-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (11 pp, sha256 b98a855171a24c5d, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF