component
ISL28113FEZ-T7A-HXY
Public Made by Adomby adom
HXY MOSFET Operational Amplifier, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ISL28113FEZ-T7A-HXY
HXY MOSFET · Operational Amplifier · SOT-353
ISL28113FEZ-T7A-HXY from HXY MOSFET, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input; the common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V at VS = 5 V. |
| 2 | V- | power_in | Negative (lowest) power supply; single-supply operation spans 1.5 V to 5.5 V with Vs = (V+) - (V-), and dual supplies span ±0.75 V to ±2.75 V. |
| 3 | -IN | input | Negative (inverting) input; the same common-mode voltage range of (V-) - 0.1 V to (V+) + 0.1 V applies. |
| 4 | OUT | output | Output with rail-to-rail swing into heavy loads; short-circuit current is 45 mA source and 70 mA sink, and the output must stay within the supply rails to avoid diode clamping above 0.5 V beyond the rails. |
| 5 | V+ | power_in | Positive (highest) power supply; absolute maximum supply voltage is 6 V and a 0.1 µF capacitor should be placed closely across the supply pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-353 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | 4 | |
| Common-Mode Rejection Ratio | CMRR | 70 | 80 | dB | VCM=0.1V to 4V | 4 | |
| Open-Loop Voltage Gain | AV | 80 | 100 | dB | VOUT=0.1V to 4.9V, RL=100kΩ | 4 | |
| Power-Supply Rejection Ratio | PSRR | 80 | 90 | dB | VS=1.5V to 5.5V | 5 | |
| Operating Voltage Range | VS | 1.5 | 5.5 | V | 5 | ||
| Quiescent Current per Amplifier | IQ | 28 | 40 | uA | IO=0A | 5 | |
| Supply Voltage (single-supply) | Vs | 1.5 | 5.5 | V | Single-supply, Vs=(V+)-(V-) | 3 | |
| Supply Voltage (dual-supply) | Vs | -0.75 | 2.75 | V | Dual-supply, Vs=(V+)-(V-), printed as ±0.75 to ±2.75 | 3 | |
| Supply Voltage | 6 | V | 3 | ||||
| Signal Input Terminals Current | -10 | 10 | mA | 3 | |||
| Signal Output Terminals Current | -200 | 200 | mA | 3 | |||
| Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | -40 | 150 | °C | 3 | |||
| Electrostatic Discharge, Human-Body Model | V(ESD) | -2000 | 2000 | V | HBM | 3 | |
| Electrostatic Discharge, Charged-Device Model | V(ESD) | -500 | 500 | V | CDM | 3 | |
| Electrostatic Discharge, Machine Model | V(ESD) | 100 | V | Machine Model | 3 | ||
| Input Bias Current | IB | 5 | pA | 4 | |||
| Input Offset Current | IOS | 1 | pA | 4 | |||
| Input Offset Voltage Average Drift | dVOS/dT | 1.8 | µV/°C | TA = -55°C to 125°C | 4 | ||
| Input Voltage Noise (0.1 Hz to 10 Hz) | VN | 20 | µV PP | f=0.1Hz to 10Hz | 4 | ||
| Input Voltage Noise Density | en | 65 | nV/√Hz | f=1kHz | 4 | ||
| Gain-Bandwidth Product | GBW | 1 | MHz | Vs=5V | 4 | ||
| Slew Rate | SR | 1 | V/µs | G = +1, VIN=2V Step | 4 | ||
| Settling Time to 0.1% | tS | 2.5 | µs | G = +1, VIN=2V Step | 4 | ||
| Output Swing from Rail | VOUT-SWING | 5 | mV | RL=100kΩ | 4 | ||
| Output Short-Circuit Current (source) | ISC | 45 | mA | Source current | 4 | ||
| Output Short-Circuit Current (sink) | ISC | 70 | mA | Sink current | 4 | ||
| Capacitive Load Drive | CL | 1000 | pF | G = +1, VIN=0.2V Step | 4 |
CAD (KiCad official)
- Symbol:
ISL28113FEZ-T7A-HXY - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
isl28113fez-t7a-hxy-etched.step/isl28113fez-t7a-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl28113fez-t7a-hxy.step/isl28113fez-t7a-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (11 pp, sha256
0dc8ba60f263ea27, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL28113FEZ-T7A-HXY
**HXY MOSFET** · Operational Amplifier · SOT-353
ISL28113FEZ-T7A-HXY from HXY MOSFET, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input; the common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V at VS = 5 V. |
| 2 | V- | power_in | Negative (lowest) power supply; single-supply operation spans 1.5 V to 5.5 V with Vs = (V+) - (V-), and dual supplies span ±0.75 V to ±2.75 V. |
| 3 | -IN | input | Negative (inverting) input; the same common-mode voltage range of (V-) - 0.1 V to (V+) + 0.1 V applies. |
| 4 | OUT | output | Output with rail-to-rail swing into heavy loads; short-circuit current is 45 mA source and 70 mA sink, and the output must stay within the supply rails to avoid diode clamping above 0.5 V beyond the rails. |
| 5 | V+ | power_in | Positive (highest) power supply; absolute maximum supply voltage is 6 V and a 0.1 µF capacitor should be placed closely across the supply pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-353 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | | 4 |
| Common-Mode Rejection Ratio | CMRR | 70 | 80 | | dB | VCM=0.1V to 4V | 4 |
| Open-Loop Voltage Gain | AV | 80 | 100 | | dB | VOUT=0.1V to 4.9V, RL=100kΩ | 4 |
| Power-Supply Rejection Ratio | PSRR | 80 | 90 | | dB | VS=1.5V to 5.5V | 5 |
| Operating Voltage Range | VS | 1.5 | | 5.5 | V | | 5 |
| Quiescent Current per Amplifier | IQ | | 28 | 40 | uA | IO=0A | 5 |
| Supply Voltage (single-supply) | Vs | 1.5 | | 5.5 | V | Single-supply, Vs=(V+)-(V-) | 3 |
| Supply Voltage (dual-supply) | Vs | -0.75 | | 2.75 | V | Dual-supply, Vs=(V+)-(V-), printed as ±0.75 to ±2.75 | 3 |
| Supply Voltage | | | | 6 | V | | 3 |
| Signal Input Terminals Current | | -10 | | 10 | mA | | 3 |
| Signal Output Terminals Current | | -200 | | 200 | mA | | 3 |
| Operating Temperature Range | | -55 | | 125 | °C | | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Junction Temperature | | -40 | | 150 | °C | | 3 |
| Electrostatic Discharge, Human-Body Model | V(ESD) | -2000 | | 2000 | V | HBM | 3 |
| Electrostatic Discharge, Charged-Device Model | V(ESD) | -500 | | 500 | V | CDM | 3 |
| Electrostatic Discharge, Machine Model | V(ESD) | | | 100 | V | Machine Model | 3 |
| Input Bias Current | IB | | 5 | | pA | | 4 |
| Input Offset Current | IOS | | 1 | | pA | | 4 |
| Input Offset Voltage Average Drift | dVOS/dT | | 1.8 | | µV/°C | TA = -55°C to 125°C | 4 |
| Input Voltage Noise (0.1 Hz to 10 Hz) | VN | | 20 | | µV PP | f=0.1Hz to 10Hz | 4 |
| Input Voltage Noise Density | en | | 65 | | nV/√Hz | f=1kHz | 4 |
| Gain-Bandwidth Product | GBW | | 1 | | MHz | Vs=5V | 4 |
| Slew Rate | SR | | 1 | | V/µs | G = +1, VIN=2V Step | 4 |
| Settling Time to 0.1% | tS | | 2.5 | | µs | G = +1, VIN=2V Step | 4 |
| Output Swing from Rail | VOUT-SWING | | 5 | | mV | RL=100kΩ | 4 |
| Output Short-Circuit Current (source) | ISC | | 45 | | mA | Source current | 4 |
| Output Short-Circuit Current (sink) | ISC | | 70 | | mA | Sink current | 4 |
| Capacitive Load Drive | CL | | 1000 | | pF | G = +1, VIN=0.2V Step | 4 |
## CAD (KiCad official)
- Symbol: `ISL28113FEZ-T7A-HXY`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files: `isl28113fez-t7a-hxy-etched.step` / `isl28113fez-t7a-hxy-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl28113fez-t7a-hxy.step` / `isl28113fez-t7a-hxy.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604441276120899584) (11 pp, sha256 `0dc8ba60f263ea27`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl28113fez-t7a-hxy-datasheet.pdf)