3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISL28025FI12Z-T7A
RENESAS · Monitors & Reset Circuits · WLCSP-16(2.2x2.2)
ISL28025FI12Z-T7A from RENESAS, in a WLCSP-16(2.2x2.2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | VREG_OUT | power_out | Voltage regulator output, which sources the regulated 3.3V; connect a proper decoupling capacitor to this pin. |
| A2 | VINM | input | Current sense minus input; the voltage range is 0V to 60V or 0V to 16V depending on the version, and the maximum measurable differential between VINP and VINM is 80mV. |
| A3 | VINP | input | Current sense plus input connected to the most positive side of the shunt; the voltage range is 0V to 60V or 0V to 16V depending on the version, and the maximum measurable differential between VINP and VINM is 80mV. |
| A4 | VBUS | power_in | Bus voltage sense input connected to the power bus to be monitored; the voltage range is 0V to 60V or 0V to 16V depending on the version. |
| B1 | I2CVCC | power_in | I2C level shifter supply for the digital communication circuitry, allowable range 1.2V to 5.5V; connect to VCC if level shifters are not used. |
| B2 | VCC | power_in | Chip positive supply for the analog circuitry, allowable range 3V to 5.5V. |
| B3 | VREG_IN | power_in | Voltage regulator input with an operable range of 4.5V to 60V; connect to ground if the voltage regulator is not used. |
| B4 | AUXV | input | Auxiliary port single-ended input with a voltage range of 0V to VCC. |
| C1 | A0 | input | I2C/SMBus slave address select input, one of four selectable levels (I2CVCC, GND, SCL/SMBCLK, SDA/SMBDAT) used to set the device address. |
| C2 | A1 | input | I2C/SMBus slave address select input, one of four selectable levels (I2CVCC, GND, SCL/SMBCLK, SDA/SMBDAT) used to set the device address. |
| C3 | A2 | input | I2C/SMBus slave address select input, one of four selectable levels (I2CVCC, GND, SCL/SMBCLK, SDA/SMBDAT) used to set the device address. |
| C4 | SMBCLK | input | SMBus/I2C serial clock input that clocks all data to and from the device; the input buffer is always active and the pin requires a pull-up resistor to I2CVCC. |
| D1 | GND | power_in | Device ground; for single supply systems it connects to system ground, and for dual supply systems it connects to the negative supply. |
| D2 | SMBALERT2/ECLK | bidirectional | External ADC clock input or CPU interrupt signal; it is used as a CPU interrupt signal only when this pin is not configured as the external clock input. |
| D3 | SMBALERT1 | output | SMBus Alert1 open-collector output that requires a pull-up resistor to a power supply of up to 24V. |
| D4 | SMBDAT | bidirectional | SMBus/I2C serial data input/output, open-drain, which requires a pull-up resistor connected to I2CVCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | WLCSP-16(2.2x2.2) |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage (absolute maximum) | VCC | 6 | V | 7 | |||
| I2C_VCC Voltage (absolute maximum) | I2C_VCC | 6 | V | 7 | |||
| VBUS (REG_IN rating) | REG_IN | 63 | V | 7 | |||
| VBUS (ISL28025FI12, ISL28025FR12) | VBUS | 16.684 | V | ISL28025FI12, ISL28025FR12 | 7 | ||
| Common-Mode Input Voltage (VINP, VINM) | VINP, VINM | 63 | V | 7 | |||
| Differential Input Voltage (VINP, VINM) | VINP, VINM | -63 | 63 | V | 7 | ||
| Output Current (VREG_OUT, DAC_OUT (20 Pin QFN)) | 10 | mA | 7 | ||||
| Open Drain Output Current | 10 | mA | 7 | ||||
| Open Drain Voltage (SMBALERT1) | SMBALERT1 | 24 | V | 7 | |||
| ESD Human Body Model | 6 | kV | 7 | ||||
| ESD Machine Model | 300 | V | 7 | ||||
| ESD Charged Device Model | 2 | kV | 7 | ||||
| Latch-Up | -100 | 100 | mA | at +125°C | 7 | ||
| Maximum Storage Temperature Range | -65 | 150 | °C | 7 | |||
| Maximum Junction Temperature (TJMAX) | TJMAX | 150 | °C | 7 | |||
| Ambient Temperature Range (TA) | TA | -40 | 125 | °C | 7 | ||
| Thermal Resistance, 16 Ball WLCSP (junction-to-ambient) | JA | 80 | °C/W | Notes 5, 6 | 7 | ||
| Thermal Resistance, 16 Ball WLCSP (junction-to-case) | JC | 1 | °C/W | Notes 5, 6 | 7 | ||
| VSHUNT Measurement Range (VINP to VINM) | VSHUNT | -81.91 | 0 | 81.91 | mV | 7 | |
| VSHUNT Offset Voltage | Vshunt_vos | -50 | 2.5 | 50 | µV | 7 | |
| VSHUNT Offset Voltage vs Temperature | Vshunt_TC | -0.3 | 0.04 | 0.3 | µV/°C | T = -40°C to +125°C | 7 |
| VSHUNT Vos vs Common-Mode (ISL28025FI12Z, ISL28025FR12Z) | Vshunt_CMRR | -2 | 0.2 | 2 | µV/V | ISL28025FI12Z, ISL28025FR12Z, VBUS = 0V to 16.384V | 7 |
| VSHUNT Vos vs Power Supply | Vshunt_PSRR | -0.45 | 0.45 | µV/V | VCC = ±10% of VCC nominal | 7 | |
| VIN Input Leakage Current (VSHUNT input path selected, OC detector disabled) | Ivin | 15 | 20 | µA | VIN = VSHUNT input path selected, OC detector disabled | 7 | |
| VIN Input Leakage Current (VSHUNT input path selected, OC detector enabled) | Ivin | 30 | 40 | µA | VIN = VSHUNT input path selected, OC detector enabled | 7 | |
| VIN Input Leakage Current (VSHUNT input path disabled, OC detector disabled) | Ivin | 0.05 | 0.1 | µA | VIN = VSHUNT input path disabled, OC detector disabled | 7 | |
| Usable Bus Voltage Measurement Range (ISL28025FI12Z, ISL28025FR12Z) | VBUS | 0 | 16.384 | V | ISL28025FI12Z, ISL28025FR12Z | 7 | |
| VBUS Offset Voltage (ISL28025FI12Z, ISL28025FR12Z) | Vbus_vos | -5 | 0.25 | 5 | mV | ISL28025FI12Z, ISL28025FR12Z | 8 |
| VBUS Offset Voltage vs Temperature (ISL28025FI12Z, ISL28025FR12Z) | Vbus_TC | -100 | 1 | 100 | µV/°C | ISL28025FI12Z, ISL28025FR12Z; T = -40°C to +125°C | 8 |
| VBUS Vos vs Power Supply (ISL28025FI12Z, ISL28025FR12Z) | Vbus_PSRR | -125 | 125 | µV/V | ISL28025FI12Z, ISL28025FR12Z; VCC = ±10% of VCC nominal | 8 | |
| Usable AUXV Voltage Measurement Range | Vauxv | 0 | V | 8 | |||
| VAUXV Offset Voltage | Vauxv_vos | -4 | 0.3 | 4 | mV | 8 | |
| VAUXV Offset Voltage vs Temperature | Vauxv_TC | -22 | 0.2 | 22 | µV/°C | T = -40°C to +125°C | 8 |
| VAUXV Vos vs Power Supply | Vauxv_PSRR | -1 | 1 | mV/V | VCC = ±10% of VCC nominal | 8 | |
| Primary Shunt Voltage Gain Error | -0.25 | 0.05 | 0.25 | % | 8 | ||
| Primary Shunt Voltage Gain Error vs Temperature | -60 | 0 | 60 | ppm/°C | T = -40°C to +125°C | 8 | |
| Primary Bus Voltage Gain Error | -0.25 | 0.05 | 0.25 | % | 8 | ||
| Primary Bus Voltage Gain Error vs Temperature | -70 | 10 | 70 | ppm/°C | T = -40°C to +125°C | 8 | |
| Aux Bus Voltage Gain Error | -0.25 | 0.05 | 0.25 | % | 8 | ||
| Aux Bus Voltage Gain Error vs Temperature | -65 | 10 | 65 | ppm/°C | T = -40°C to +125°C | 8 | |
| Differential Nonlinearity | -1 | 1 | LSB | 8 |
CAD (KiCad official)
- Symbol:
ISL28025FI12Z-T7A - Footprint:
Package_CSP:WLCSP-16_2.225x2.17mm_Layout4x4_P0.5mm - 3D model: WLCSP-16(2.2x2.2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.35 mm nominal DSBGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
isl28025fi12z-t7a-etched.step/isl28025fi12z-t7a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl28025fi12z-t7a.step/isl28025fi12z-t7a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (53 pp, sha256
f9bb6d810fc48c6d, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).