main
Ray
Publish 0.1.0
c5f435a
ISL1208IU8Z-TK
Intersil(Renesas Electronics) · Real-time Clocks (RTC) · MSOP-8
ISL1208IU8Z-TK from Intersil(Renesas Electronics), in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | X1 is the input of an inverting amplifier intended for one pin of an external 32.768kHz quartz crystal, and can also be driven directly from a 32.768kHz source. |
| 2 | X2 | output | X2 is the output of an inverting amplifier intended to connect to the other pin of an external 32.768kHz quartz crystal. |
| 3 | VBAT | power_in | VBAT provides a backup supply voltage that powers the device when VDD fails, with VBAT specified from 1.8V to 5.5V; it should be tied to ground if not used. |
| 4 | GND | power_in | GND is the ground reference for the device. |
| 5 | SDA | bidirectional | SDA is the bidirectional serial data pin, an open drain output that may be wire-OR'ed and requires a pull-up resistor. |
| 6 | SCL | input | SCL is the serial clock input used to clock all serial data into and out of the device. |
| 7 | IRQ/FOUT | output | IRQ/FOUT is a multifunction open drain active low pin used as an interrupt output or frequency output, with the function set via the configuration register. |
| 8 | VDD | power_in | VDD is the main power supply pin, specified from 2.7V to 5.5V for the main supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | MSOP-8 |
| Category | Clock and Timing |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ISL1208IU8Z-TK - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
isl1208iu8z-tk-etched.step/isl1208iu8z-tk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl1208iu8z-tk.step/isl1208iu8z-tk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (24 pp, sha256
ce7c089b10df0689, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISL1208IU8Z-TK
**Intersil(Renesas Electronics)** · Real-time Clocks (RTC) · MSOP-8
ISL1208IU8Z-TK from Intersil(Renesas Electronics), in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | X1 is the input of an inverting amplifier intended for one pin of an external 32.768kHz quartz crystal, and can also be driven directly from a 32.768kHz source. |
| 2 | X2 | output | X2 is the output of an inverting amplifier intended to connect to the other pin of an external 32.768kHz quartz crystal. |
| 3 | VBAT | power_in | VBAT provides a backup supply voltage that powers the device when VDD fails, with VBAT specified from 1.8V to 5.5V; it should be tied to ground if not used. |
| 4 | GND | power_in | GND is the ground reference for the device. |
| 5 | SDA | bidirectional | SDA is the bidirectional serial data pin, an open drain output that may be wire-OR'ed and requires a pull-up resistor. |
| 6 | SCL | input | SCL is the serial clock input used to clock all serial data into and out of the device. |
| 7 | IRQ/FOUT | output | IRQ/FOUT is a multifunction open drain active low pin used as an interrupt output or frequency output, with the function set via the configuration register. |
| 8 | VDD | power_in | VDD is the main power supply pin, specified from 2.7V to 5.5V for the main supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | MSOP-8 |
| Category | Clock and Timing |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `ISL1208IU8Z-TK`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `isl1208iu8z-tk-etched.step` / `isl1208iu8z-tk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `isl1208iu8z-tk.step` / `isl1208iu8z-tk.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Intersil(Renesas Electronics) datasheet](docs/isl1208iu8z-tk-datasheet.pdf) (24 pp, sha256 `ce7c089b10df0689`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/isl1208iu8z-tk-datasheet.pdf)