main
History Download
Ray Publish 0.1.0 0ac12a4

ISL12057IBZ-T

RENESAS · Real-time Clocks (RTC) · SOIC-8

ISL12057IBZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Input of an inverting amplifier for an external 32.768kHz quartz crystal with 6pF load capacitance, or driven by an external 32.768kHz oscillator with X2 floating.
2 X2 output Output of an inverting amplifier for an external 32.768kHz quartz crystal with 6pF required load capacitance.
3 IRQ2 output Open-drain Interrupt Output 2 for alarm interrupts, requires an external pull-up resistor and is high impedance at power-up.
4 GND power_in Ground.
5 SDA bidirectional Open-drain I2C serial data pin for transferring data into and out of the device, may be wire-OR'ed, pull-up up to 5.5V.
6 SCL input I2C serial clock input used to clock all serial data into and out of the device, accepts logic high up to 5.5V.
7 IRQ1/FOUT output Open-drain alarm interrupt or frequency output selected via the configuration register, requires an external pull-up and defaults to 32.768kHz output at power-up.
8 VDD power_in Power supply, full operation from 1.8V to 3.6V and timekeeping from 1.4V to 1.8V, with a 0.1µF decoupling capacitor recommended.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category RTC/Clock Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Full Operation Power Supply VDD 1.8 3.6 V 4
Timekeeping Power Supply VDDT 1.4 1.8 V 4
Standby Supply Current IDD1 600 950 nA VDD = 3.6V; IRQ1/FOUT inactive; specified at +25°C 4
Standby Supply Current IDD1 500 nA VDD = 3.3V; IRQ1/FOUT inactive; specified at +25°C 4
Timekeeping Current IDD2 400 650 nA VDD = 1.8V; IRQ1/FOUT inactive; specified at +25°C 4
Timekeeping Current IDD2 350 nA VDD = 1.6V; IRQ1/FOUT inactive; specified at +25°C 4
Supply Current With I2C Active at 400kHz IDD3 15 40 µA VDD = 3.6V; IRQ1/FOUT inactive 4
Input Leakage Current on SCL ILI -100 100 nA 4
I/O Leakage Current on SDA ILO -100 100 nA 4
IRQ1/FOUT and IRQ2 Output Low Voltage VOL 0.4 V VDD = 1.8V, IOL = 3mA 4
SDA and SCL Input Buffer LOW Voltage VIL -0.3 0.3 V max is 0.3 x VDD 4
SDA and SCL Input Buffer HIGH Voltage VIH 0.7 5.5 V min is 0.7 x VDD 4
SDA and SCL Input Buffer Hysteresis Hysteresis 0.04 V 0.04 x VDD 4
Maximum Pull-up voltage on SDA during I2C communication VPULLUP 2 V VDD + 2 4
SDA Output Buffer LOW Voltage, Sinking 3mA VOL 0 0.4 V VDD > 1.8V, VPULLUP = 5.0V 4
SDA and SCL Pin Capacitance Cpin 10 pF TA = +25°C, f = 1MHz, VDD = 5V, VIN = 0V, VOUT = 0V 4
SCL Frequency fSCL 400 kHz 4
Pulse width Suppression Time at SDA and SCL Inputs tIN 50 ns Any pulse narrower than the max spec is suppressed. 4
SCL Falling Edge to SDA Output Data Valid tAA 900 ns SCL falling edge crossing 30% of VDD, until SDA exits the 30% to 70% of VDD window 5
Bus Free Time Before New Transmission tBUF 1300 ns SDA crossing 70% of VDD during a STOP condition, to SDA crossing 70% of VDD during the following START condition 5
Clock LOW Time tLOW 1300 ns Measured at the 30% of VDD crossing 5
Clock HIGH Time tHIGH 600 ns Measured at the 70% of VDD crossing 5
START Condition Setup Time tSU:STA 600 ns SCL rising edge to SDA falling edge. Both crossing 70% of VDD 5
START Condition Hold Time tHD:STA 600 ns From SDA falling edge crossing 30% of VDD to SCL falling edge crossing 70% of VDD 5
Input Data Setup Time tSU:DAT 100 ns From SDA exiting the 30% to 70% of VDD window, to SCL rising edge crossing 30% of VDD 5
Input Data Hold Time tHD:DAT 0 900 ns From SCL falling edge crossing 30% of VDD to SDA entering the 30% to 70% of VDD window 5
STOP Condition Setup Time tSU:STO 600 ns From SCL rising edge crossing 70% of VDD, to SDA rising edge crossing 30% of VDD 5
STOP Condition Hold Time tHD:STO 600 ns From SDA rising edge to SCL falling edge. Both crossing 70% of VDD 5
Output Data Hold Time tDH 0 ns From SCL falling edge crossing 30% of VDD, until SDA enters the 30% to 70% of VDD window 5
SDA and SCL Rise Time tR 300 ns From 30% to 70% of VDD; min is 20 + 0.1 x Cb 5
SDA and SCL Fall Time tF 300 ns From 70% to 30% of VDD; min is 20 + 0.1 x Cb 5
Capacitive Loading of SDA or SCL Cb 10 400 pF Total on-chip and off-chip 5
SDA and SCL Bus Pull-Up Resistor Off-Chip Rpu 1 kΩ Maximum is determined by tR and tF 5
Voltage on VDD (Respect to GND) VDD -0.2 4 V 4
Voltage on IRQ1/FOUT, IRQ2, SCL and SDA -0.2 6 V Respect to GND 4
Voltage on X1 and X2 Pins -0.2 4 V Respect to GND 4
Storage Temperature -65 150 °C 4
ESD Rating Human Body Model 4 kV Per MIL-STD-883 Method 3014; printed >4kV 4
ESD Rating Machine Model 350 V printed >350V 4
Thermal Resistance, 8 Lead SOIC θJA 120 °C/W Typical; mounted on high effective thermal conductivity test board in free air 4
Operating Temperature Range -40 85 °C ISL12057IBZ 2
VDD Range VDD 1.4 3.6 V Ordering information VDD range 2

CAD (KiCad official)

  • Symbol: ISL12057IBZ-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: isl12057ibz-t-etched.step / isl12057ibz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl12057ibz-t.step / isl12057ibz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (18 pp, sha256 e944beb36d14867b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF