main
Ray
Publish 0.1.0
f929fe1
IS802BSOT236
analogysemi · Battery Management ICs · SOT23-6
IS802BSOT236 from analogysemi, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Open drain output 1 that connects to one end of the transformer primary side (absolute maximum 14 V, peak switch current 500 mA). |
| 2 | VCC | power_in | Supply voltage input (2.5 V to 5.5 V) that connects to the transformer primary center-tap and is buffered with a 1 µF to 10 µF ceramic capacitor. |
| 3 | D2 | output | Open drain output 2 that connects to the other end of the transformer primary side (absolute maximum 14 V, peak switch current 500 mA). |
| 4 | GND | power_in | Device ground, connected to board ground. |
| 5 | EN | input | Turns the device on or off; pulled up to VCC by default and can be left floating or tied to VCC if unused (logic high 1.4 V, logic low 0.4 V thresholds). |
| 6 | CLK | input | External clock input (200 kHz to 2000 kHz), internally pulled down to GND, and the device switches automatically to the internal clock if no valid clock is detected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | analogysemi |
| Package | SOT23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Output switch voltage | VD1, VD2 | 14 | V | 4 | |||
| Peak output switch current | ID1P, ID2P | 500 | mA | 4 | |||
| Continuous power dissipation | PTOT | 250 | mW | 4 | |||
| Junction temperature | TJ | -40 | 180 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -5000 | 5000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -2000 | 2000 | V | Charged-device model, JESD22-C101 | 4 | |
| Supply voltage | VCC | 2.5 | 3.3 | 5.5 | V | 5 | |
| Output switch voltage | VD1, VD2 | 0 | 11 | V | VCC = 5V ± 10%, transformer with center-tapped primary | 5 | |
| Output switch voltage | VD1, VD2 | 0 | 7.2 | V | VCC = 3.3V ± 10% | 5 | |
| D1 and D2 output switch current | ID1, ID2 | 500 | mA | VCC = 5V ± 10%, VD1, VD2 swing ≥ 3.8V | 5 | ||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 174 | °C/W | SOT23-6 | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 107 | °C/W | SOT23-6 | 5 | ||
| Junction-to-board thermal resistance | RθJB | 72 | °C/W | SOT23-6 | 5 | ||
| Junction-to-top characterization parameter | ψJT | 50 | °C/W | SOT23-6 | 5 | ||
| Junction-to-board characterization parameter | ψJB | 69 | °C/W | SOT23-6 | 5 | ||
| Switch-on resistance | RON | 0.36 | 0.6 | Ω | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 | |
| Switch-on resistance | RON | 0.34 | 0.52 | Ω | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 | |
| Average supply current | ICC | 200 | 265 | µA | VCC = 3.3V ± 10%, no load | 6 | |
| Average supply current | ICC | 375 | 450 | µA | VCC = 5V ± 10%, no load | 6 | |
| Shutdown current | ISD | 7 | 12 | µA | 6 | ||
| D1, D2 switching frequency | fSW | 300 | 370 | 550 | kHz | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| D1, D2 switching frequency | fSW | 300 | 380 | 550 | kHz | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| External clock frequency on CLK pin | fEXT | 200 | 2000 | kHz | 6 | ||
| VCC UVLO rising threshold | VCC_UVLO | 2.2 | 2.55 | V | 6 | ||
| VCC UVLO falling threshold | VCC_UVLO | 2 | V | 6 | |||
| Internal frequency dither range | FREQ_DITH | -4.5 | 4.5 | % | MODE = VDD, CLK_RS unconnected | 6 | |
| Duration after switch from external to internal clock | TCLKTIMER | 35 | µs | When External Clock is Invalid | 6 | ||
| Internal frequency dither step | FREQ_DITH_STEP | 0.6 | % | MODE = VDD, CLK_RS unconnected | 6 | ||
| Max peak current of internal powerfet during soft-start | ISS | 200 | mA | VDD = 3.3V | 6 | ||
| Soft-start time | T_SS | 1.2 | ms | MODE = VDD, CLK_RS unconnected | 6 | ||
| EN, CLK logic high threshold | VIN(ON) | 1.4 | V | 6 | |||
| EN, CLK logic low threshold | VIN(OFF) | 0.4 | V | 6 | |||
| Thermal shutdown temperature | TSD | 165 | °C | 6 | |||
| Hysteresis of TSD | TSD_HYS | 15 | °C | 6 | |||
| Thermal shutdown hiccup time | T_TSD_HICP | 64 | ms | 6 | |||
| D1, D2 output rise time | tr-D | 96 | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 | ||
| D1, D2 output rise time | tr-D | 99 | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 | ||
| D1, D2 output fall time | tf-D | 126 | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 | ||
| D1, D2 output fall time | tf-D | 71.8 | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 | ||
| Break-before-make time | tBBM | 165 | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 | ||
| Break-before-make time | tBBM | 110 | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
CAD (KiCad official)
- Symbol:
IS802BSOT236 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files:
is802bsot236-etched.step/is802bsot236-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is802bsot236.step/is802bsot236.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: analogysemi datasheet (21 pp, sha256
a2ea1fbe1940456b, retrieved 2026-10-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# IS802BSOT236
**analogysemi** · Battery Management ICs · SOT23-6
IS802BSOT236 from analogysemi, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Open drain output 1 that connects to one end of the transformer primary side (absolute maximum 14 V, peak switch current 500 mA). |
| 2 | VCC | power_in | Supply voltage input (2.5 V to 5.5 V) that connects to the transformer primary center-tap and is buffered with a 1 µF to 10 µF ceramic capacitor. |
| 3 | D2 | output | Open drain output 2 that connects to the other end of the transformer primary side (absolute maximum 14 V, peak switch current 500 mA). |
| 4 | GND | power_in | Device ground, connected to board ground. |
| 5 | EN | input | Turns the device on or off; pulled up to VCC by default and can be left floating or tied to VCC if unused (logic high 1.4 V, logic low 0.4 V thresholds). |
| 6 | CLK | input | External clock input (200 kHz to 2000 kHz), internally pulled down to GND, and the device switches automatically to the internal clock if no valid clock is detected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | analogysemi |
| Package | SOT23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 6 | V | | 4 |
| Output switch voltage | VD1, VD2 | | | 14 | V | | 4 |
| Peak output switch current | ID1P, ID2P | | | 500 | mA | | 4 |
| Continuous power dissipation | PTOT | | | 250 | mW | | 4 |
| Junction temperature | TJ | -40 | | 180 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD HBM | V(ESD) | -5000 | | 5000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD CDM | V(ESD) | -2000 | | 2000 | V | Charged-device model, JESD22-C101 | 4 |
| Supply voltage | VCC | 2.5 | 3.3 | 5.5 | V | | 5 |
| Output switch voltage | VD1, VD2 | 0 | | 11 | V | VCC = 5V ± 10%, transformer with center-tapped primary | 5 |
| Output switch voltage | VD1, VD2 | 0 | | 7.2 | V | VCC = 3.3V ± 10% | 5 |
| D1 and D2 output switch current | ID1, ID2 | | | 500 | mA | VCC = 5V ± 10%, VD1, VD2 swing ≥ 3.8V | 5 |
| Ambient temperature | TA | -40 | | 125 | °C | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 174 | | °C/W | SOT23-6 | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 107 | | °C/W | SOT23-6 | 5 |
| Junction-to-board thermal resistance | RθJB | | 72 | | °C/W | SOT23-6 | 5 |
| Junction-to-top characterization parameter | ψJT | | 50 | | °C/W | SOT23-6 | 5 |
| Junction-to-board characterization parameter | ψJB | | 69 | | °C/W | SOT23-6 | 5 |
| Switch-on resistance | RON | | 0.36 | 0.6 | Ω | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| Switch-on resistance | RON | | 0.34 | 0.52 | Ω | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| Average supply current | ICC | | 200 | 265 | µA | VCC = 3.3V ± 10%, no load | 6 |
| Average supply current | ICC | | 375 | 450 | µA | VCC = 5V ± 10%, no load | 6 |
| Shutdown current | ISD | | 7 | 12 | µA | | 6 |
| D1, D2 switching frequency | fSW | 300 | 370 | 550 | kHz | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| D1, D2 switching frequency | fSW | 300 | 380 | 550 | kHz | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| External clock frequency on CLK pin | fEXT | 200 | | 2000 | kHz | | 6 |
| VCC UVLO rising threshold | VCC_UVLO | | 2.2 | 2.55 | V | | 6 |
| VCC UVLO falling threshold | VCC_UVLO | | 2 | | V | | 6 |
| Internal frequency dither range | FREQ_DITH | -4.5 | | 4.5 | % | MODE = VDD, CLK_RS unconnected | 6 |
| Duration after switch from external to internal clock | TCLKTIMER | | 35 | | µs | When External Clock is Invalid | 6 |
| Internal frequency dither step | FREQ_DITH_STEP | | 0.6 | | % | MODE = VDD, CLK_RS unconnected | 6 |
| Max peak current of internal powerfet during soft-start | ISS | | 200 | | mA | VDD = 3.3V | 6 |
| Soft-start time | T_SS | | 1.2 | | ms | MODE = VDD, CLK_RS unconnected | 6 |
| EN, CLK logic high threshold | VIN(ON) | | 1.4 | | V | | 6 |
| EN, CLK logic low threshold | VIN(OFF) | | 0.4 | | V | | 6 |
| Thermal shutdown temperature | TSD | | 165 | | °C | | 6 |
| Hysteresis of TSD | TSD_HYS | | 15 | | °C | | 6 |
| Thermal shutdown hiccup time | T_TSD_HICP | | 64 | | ms | | 6 |
| D1, D2 output rise time | tr-D | | 96 | | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
| D1, D2 output rise time | tr-D | | 99 | | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
| D1, D2 output fall time | tf-D | | 126 | | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
| D1, D2 output fall time | tf-D | | 71.8 | | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
| Break-before-make time | tBBM | | 165 | | ns | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
| Break-before-make time | tBBM | | 110 | | ns | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 7 |
## CAD (KiCad official)
- Symbol: `IS802BSOT236`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT23-6 (KiCad packages3D, STEP)
- 3D model files: `is802bsot236-etched.step` / `is802bsot236-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `is802bsot236.step` / `is802bsot236.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [analogysemi datasheet](docs/is802bsot236-datasheet.pdf) (21 pp, sha256 `a2ea1fbe1940456b`, retrieved 2026-10-26, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/is802bsot236-datasheet.pdf)