main
Ray
Publish 0.1.0
ec7d016
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233
{
"slug": "is801qbsot235",
"version": "0.1.0",
"type": "component",
"description": "analogysemi Battery Management, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"is801qbsot235",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"is801qbsot235.kicad_sym",
"is801qbsot235.kicad_mod",
"is801qbsot235.glb",
"is801qbsot235.step",
"is801qbsot235.lbr",
"docs/hero.png",
"docs/is801qbsot235-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"is801qbsot235-hero.glb",
"is801qbsot235-hero.overlay.json"
],
"component": {
"mpn": "IS801QBSOT235",
"manufacturer": "analogysemi",
"package": "SOT-23-5",
"pin_count": 5,
"category": "Power Management (PMIC)",
"subcategory": "Battery Management",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/dd439d705615cb8da640ebce6e7feddf.pdf",
"parts": {
"symbol": "is801qbsot235.kicad_sym",
"footprint": "is801qbsot235.kicad_mod",
"model_3d": "is801qbsot235-hero.glb",
"model_3d_plain": "is801qbsot235.glb",
"model_3d_step": "is801qbsot235-etched.step",
"model_3d_step_plain": "is801qbsot235.step",
"lbr": "is801qbsot235.lbr"
},
"distributor_links": {
"lcsc": "C6807619"
},
"distributor_check": {
"checked_at": "2026-11-12T20:49:18Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "D1",
"type": "output",
"description": "Open-drain output 1, connected to one end of the transformer primary side; the datasheet gives the D1/D2 switch voltage as 0 to 11 V at VCC = 5 V ±10% and 0 to 7.2 V at VCC = 3.3 V ±10%, with switch current up to 500 mA."
},
{
"number": "2",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input, rated 2.5 V to 5.5 V recommended operating and -0.3 V to 6 V absolute maximum, connected to the transformer primary center-tap and buffered with a 1 µF to 10 µF ceramic capacitor."
},
{
"number": "3",
"name": "D2",
"type": "output",
"description": "Open-drain output 2, connected to the other end of the transformer primary side; the datasheet gives the D1/D2 switch voltage as 0 to 11 V at VCC = 5 V ±10% and 0 to 7.2 V at VCC = 3.3 V ±10%, with switch current up to 500 mA."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Device ground, to be connected to board ground (two vias to the PCB ground plane are recommended for minimum inductance)."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Device ground, to be connected to board ground (two vias to the PCB ground plane are recommended for minimum inductance)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 2 lists GND once for positions '4, 5'; it is split here into two pin entries with the same fun; Datasheet type is 'OD' (open drain), mapped to KiCad 'output' since no open-drain class is in the sc; Switch-voltage and VCC limits in descriptions are taken from Table 3 and Table 5 (not from the pin t"
],
"pages_sent": 20,
"cost_usd": 0.0036,
"at": "2026-11-12T20:49:06"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/dd439d705615cb8da640ebce6e7feddf.pdf",
"pages": 20,
"sha256": "a64c8a245cddb33d",
"source_tier": "lcsc"
},
"cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "SOT",
"height_mm": 1.15,
"height_basis": "datasheet A, midpoint of min and max",
"standoff_mm": 0.05,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.36,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.95 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.172,
"lead_thickness_basis": "default for pitch 0.95 mm, height 1.15 mm (no datasheet c read)"
},
"pins": {
"total": 5,
"described": 5,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "is801qbsot235.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.92,
1.15
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "913b6434dcbdbae226483c137abf8fa8f19099bb1754f5fb8fa7d3afd605c848",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "is801qbsot235-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.92,
1.15
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "dcf7cc5c163790d925fd6ba668d1e104419fea2e0e6758120d88291df6ff9b31",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOT23-5",
"source_page": 18,
"D": {
"nom_mm": 2.92,
"range_mm": [
2.82,
3.02
]
},
"E1": {
"nom_mm": 1.6,
"range_mm": [
1.5,
1.7
]
},
"E": {
"nom_mm": 2.8,
"range_mm": [
2.65,
2.95
]
},
"e": {
"nom_mm": 0.95,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.15,
"range_mm": [
1.05,
1.25
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "is801qbsot235.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}