main
Ray
Publish 0.1.0
ec7d016
IS801QBSOT235
analogysemi · Battery Management · SOT-23-5
IS801QBSOT235 from analogysemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Open-drain output 1, connected to one end of the transformer primary side; the datasheet gives the D1/D2 switch voltage as 0 to 11 V at VCC = 5 V ±10% and 0 to 7.2 V at VCC = 3.3 V ±10%, with switch current up to 500 mA. |
| 2 | VCC | power_in | Supply voltage input, rated 2.5 V to 5.5 V recommended operating and -0.3 V to 6 V absolute maximum, connected to the transformer primary center-tap and buffered with a 1 µF to 10 µF ceramic capacitor. |
| 3 | D2 | output | Open-drain output 2, connected to the other end of the transformer primary side; the datasheet gives the D1/D2 switch voltage as 0 to 11 V at VCC = 5 V ±10% and 0 to 7.2 V at VCC = 3.3 V ±10%, with switch current up to 500 mA. |
| 4 | GND | power_in | Device ground, to be connected to board ground (two vias to the PCB ground plane are recommended for minimum inductance). |
| 5 | GND | power_in | Device ground, to be connected to board ground (two vias to the PCB ground plane are recommended for minimum inductance). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | analogysemi |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Output switch voltage | VD1, VD2 | 14 | V | 4 | |||
| Peak output switch current | ID1P, ID2P | 500 | mA | 4 | |||
| Continuous power dissipation | PTOT | 250 | mW | 4 | |||
| Junction temperature | TJ | -40 | 180 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2.5 | 3.3 | 5.5 | V | 5 | |
| Output switch voltage | VD1, VD2 | 0 | 11 | V | VCC = 5V ± 10%, transformer with primary winding center-tapped | 5 | |
| Output switch voltage | VD1, VD2 | 0 | 7.2 | V | VCC = 3.3V ± 10% | 5 | |
| D1 and D2 output switch current (primary-side) | ID1, ID2 | 500 | mA | VCC = 5V ± 10%, VD1, VD2 swing ≥ 3.8V | 5 | ||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Switch-on resistance | RON | 0.36 | 0.6 | Ω | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 | |
| Switch-on resistance | RON | 0.34 | 0.54 | Ω | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 | |
| Average supply current | ICC | 202 | 265 | µA | VCC = 3.3V ± 10%, no load | 6 | |
| Average supply current | ICC | 385 | 460 | µA | VCC = 5V ± 10%, no load | 6 | |
| D1, D2 switching frequency | fSW | 275 | 370 | 550 | kHz | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| D1, D2 switching frequency | fSW | 280 | 370 | 550 | kHz | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| Internal frequency dither range | FREQ_DITH | -4.5 | 4.5 | % | MODE = VDD, CLK_RS unconnected | 6 | |
| Max peak current of internal powerFET during soft-start | ISS | 220 | mA | VDD = 3.3V | 6 | ||
| VCC under voltage lock out rising threshold | VCC_UVLO | 2.2 | 2.55 | V | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 195 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 78 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 61 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 80 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC (top) | 131 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
IS801QBSOT235 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
is801qbsot235-etched.step/is801qbsot235-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is801qbsot235.step/is801qbsot235.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: analogysemi datasheet (20 pp, sha256
a64c8a245cddb33d, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# IS801QBSOT235
**analogysemi** · Battery Management · SOT-23-5
IS801QBSOT235 from analogysemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Open-drain output 1, connected to one end of the transformer primary side; the datasheet gives the D1/D2 switch voltage as 0 to 11 V at VCC = 5 V ±10% and 0 to 7.2 V at VCC = 3.3 V ±10%, with switch current up to 500 mA. |
| 2 | VCC | power_in | Supply voltage input, rated 2.5 V to 5.5 V recommended operating and -0.3 V to 6 V absolute maximum, connected to the transformer primary center-tap and buffered with a 1 µF to 10 µF ceramic capacitor. |
| 3 | D2 | output | Open-drain output 2, connected to the other end of the transformer primary side; the datasheet gives the D1/D2 switch voltage as 0 to 11 V at VCC = 5 V ±10% and 0 to 7.2 V at VCC = 3.3 V ±10%, with switch current up to 500 mA. |
| 4 | GND | power_in | Device ground, to be connected to board ground (two vias to the PCB ground plane are recommended for minimum inductance). |
| 5 | GND | power_in | Device ground, to be connected to board ground (two vias to the PCB ground plane are recommended for minimum inductance). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | analogysemi |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 6 | V | | 4 |
| Output switch voltage | VD1, VD2 | | | 14 | V | | 4 |
| Peak output switch current | ID1P, ID2P | | | 500 | mA | | 4 |
| Continuous power dissipation | PTOT | | | 250 | mW | | 4 |
| Junction temperature | TJ | -40 | | 180 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VCC | 2.5 | 3.3 | 5.5 | V | | 5 |
| Output switch voltage | VD1, VD2 | 0 | | 11 | V | VCC = 5V ± 10%, transformer with primary winding center-tapped | 5 |
| Output switch voltage | VD1, VD2 | 0 | | 7.2 | V | VCC = 3.3V ± 10% | 5 |
| D1 and D2 output switch current (primary-side) | ID1, ID2 | | | 500 | mA | VCC = 5V ± 10%, VD1, VD2 swing ≥ 3.8V | 5 |
| Ambient temperature | TA | -40 | | 125 | °C | | 5 |
| Switch-on resistance | RON | | 0.36 | 0.6 | Ω | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| Switch-on resistance | RON | | 0.34 | 0.54 | Ω | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| Average supply current | ICC | | 202 | 265 | µA | VCC = 3.3V ± 10%, no load | 6 |
| Average supply current | ICC | | 385 | 460 | µA | VCC = 5V ± 10%, no load | 6 |
| D1, D2 switching frequency | fSW | 275 | 370 | 550 | kHz | VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| D1, D2 switching frequency | fSW | 280 | 370 | 550 | kHz | VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND | 6 |
| Internal frequency dither range | FREQ_DITH | -4.5 | | 4.5 | % | MODE = VDD, CLK_RS unconnected | 6 |
| Max peak current of internal powerFET during soft-start | ISS | | | 220 | mA | VDD = 3.3V | 6 |
| VCC under voltage lock out rising threshold | VCC_UVLO | | 2.2 | 2.55 | V | | 6 |
| Junction-to-ambient thermal resistance | RθJA | | 195 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 78 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 61 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 80 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC (top) | | 131 | | °C/W | | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `IS801QBSOT235`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `is801qbsot235-etched.step` / `is801qbsot235-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `is801qbsot235.step` / `is801qbsot235.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [analogysemi datasheet](docs/is801qbsot235-datasheet.pdf) (20 pp, sha256 `a64c8a245cddb33d`, retrieved 2026-11-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/is801qbsot235-datasheet.pdf)