main
Ray is32lt3961-zla3-tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 439b6eb
{
  "slug": "is32lt3961-zla3-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "ISSI Integrated Silicon Solution LED Drivers, TSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led-drv",
    "is32lt3961-zla3-tr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "is32lt3961-zla3-tr.kicad_sym",
    "is32lt3961-zla3-tr.kicad_mod",
    "is32lt3961-zla3-tr.glb",
    "is32lt3961-zla3-tr.step",
    "is32lt3961-zla3-tr.lbr",
    "docs/hero.png",
    "docs/is32lt3961-zla3-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "is32lt3961-zla3-tr-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "IS32LT3961-ZLA3-TR",
    "manufacturer": "ISSI Integrated Silicon Solution",
    "package": "TSSOP-16-EP",
    "pin_count": 17,
    "category": "LED Drivers",
    "parts": {
      "symbol": "is32lt3961-zla3-tr.kicad_sym",
      "footprint": "is32lt3961-zla3-tr.kicad_mod",
      "model_3d": "is32lt3961-zla3-tr-etched.glb",
      "model_3d_plain": "is32lt3961-zla3-tr.glb",
      "model_3d_step": "is32lt3961-zla3-tr-etched.step",
      "model_3d_step_plain": "is32lt3961-zla3-tr.step",
      "lbr": "is32lt3961-zla3-tr.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input, 5V to 60V (absolute max 66V). Connect a bypass capacitor CVCC (4.7µF typ.) to ground; route from CVCC to GND and VCC as short as possible."
      },
      {
        "number": "2",
        "name": "TON",
        "type": "input",
        "description": "On-time setting pin. Connect a resistor RTON from this pin to VCC to set the constant on-time (switching frequency) for the COT buck controller."
      },
      {
        "number": "3",
        "name": "EN/PWM",
        "type": "input",
        "description": "Logic input for enable and PWM dimming. Pull above VIH (2V typ., 1.4V min) to enable, below VIL (0.8V typ., 0.4V) to disable. Accepts a 100Hz-20kHz PWM signal to dim LED brightness. High-voltage tolerant; internal 200kΩ pull-down."
      },
      {
        "number": "4",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference for the internal control circuitry and small-signal setting components."
      },
      {
        "number": "5",
        "name": "FAULTB",
        "type": "output",
        "description": "Open-drain diagnostic output. Active low to indicate fault conditions (LED open/short, single LED short, RIS/BOOT/RTON faults, thermal shutdown, etc.). Requires external pull-up (typ. 10kΩ). VOL ≤ 0.2V at IOL = 5mA; leakage ≤ 1µA with 6V pull-up."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_out",
        "description": "Internal 6V (typ., 5.8-6.2V) LDO output that powers internal control circuits. Connect a 1µF X7R ceramic cap to GND placed as close to VDD as possible. May supply reference to ADIM or pull-up for FAULTB; current limit 22-37mA."
      },
      {
        "number": "7",
        "name": "ADIM",
        "type": "input",
        "description": "Analog dimming input. Voltage 0.4V-2V linearly scales the current-sense regulation threshold (VIS); >2.1V disables analog dimming (100% output); <0.28V forces output off. Never leave floating. Input current: 0nA (VADIM<2V), −25nA (VADIM>2V)."
      },
      {
        "number": "8",
        "name": "IMON",
        "type": "output",
        "description": "Output current monitor. Analog buffered voltage representing the LED current: VIMON = (VISP − VISN) × 8 + 0.4V. Up to ~VDD (6V). Can drive host ADC through a resistor divider if needed."
      },
      {
        "number": "9",
        "name": "SCD",
        "type": "input",
        "description": "LED short-circuit detection threshold input. Connect a resistor divider (RSCD1/RSCD2) from LED+ to GND. FAULTB asserts when VSCD falls below VSCD_TH (1.15V typ., 50mV hysteresis). Never leave floating; if unused, tie to ISN via 10kΩ."
      },
      {
        "number": "10",
        "name": "ISN",
        "type": "input",
        "description": "Current-sense negative input for the high-side LED current sense resistor RIS. Together with ISP forms the average LED current sense (VIS = 200mV typ. for 100% load)."
      },
      {
        "number": "11",
        "name": "ISP",
        "type": "input",
        "description": "Current-sense positive input. Sense element RIS is connected between ISP and ISN across the high-side path. ISP bias current: 176µA (VISN=12V) or −50µA (VISN=0V)."
      },
      {
        "number": "12",
        "name": "VOUT",
        "type": "input",
        "description": "Output voltage sense pin. Feeds the COT timer and control loop with the buck output voltage information."
      },
      {
        "number": "13",
        "name": "SGND",
        "type": "power_in",
        "description": "Power/signal ground for the low-side current sense. The CS sense resistor RCS MUST be connected to this ground pin for precise sensing."
      },
      {
        "number": "14",
        "name": "CS",
        "type": "input",
        "description": "Current ripple sense input. Senses the inductor current ripple during the high-side MOSFET off-time via low-side resistor RCS for loop control, valley current limit (VCS_TH1 = 50mV typ.), and inductor peak current limit (VCS_TH2 = 100mV typ.)."
      },
      {
        "number": "15",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap capacitor node for the internal high-side MOSFET gate driver. Connect a 0.1µF X7R ceramic capacitor from BOOT to LX. Internal 5.5V LDO charges CBOOT during off-time; UVLO at 2.85V rising / 2.5V falling."
      },
      {
        "number": "16",
        "name": "LX",
        "type": "output",
        "description": "Internal high-side MOSFET switch node output. Connect to the buck inductor and Schottky recirculating diode. Steady-state −0.6V to VCC+0.3V; transient (<10ns) tolerant down to −3V. RDS_ON ≈ 0.2Ω."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed thermal pad on the underside of the eTSSOP-16 package. Connect to GND and solder to a copper ground plane with thermal vias for heat dissipation (θJP = 1.617°C/W)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C3190902",
      "digikey": "2521-IS32LT3961-ZLA3-TR-ND",
      "mouser": "870-IS32LT3961ZLA3TR"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:01:54Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "2521-IS32LT3961-ZLA3-TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "870-IS32LT3961ZLA3TR",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "is32lt3961-zla3-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "is32lt3961-zla3-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3b791025f7713a012c57dd00e460f2f3813d074ce80ce13ecbd4cac79e17e27c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}