Generated by kicad-footprint-generator · KiCad file format 20260206
IS31FL3736-QFLS4-TR
Lumissil Microsystems · LED Drivers · QFN-40-EP(5x5)
IS31FL3736-QFLS4-TR from Lumissil Microsystems, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW1 | passive | Switch pin for LED matrix scanning. |
| 2 | SW2 | passive | Switch pin for LED matrix scanning. |
| 3 | SW3 | passive | Switch pin for LED matrix scanning. |
| 4 | PGND | power_in | Power ground. |
| 5 | SW4 | passive | Switch pin for LED matrix scanning. |
| 6 | SW5 | passive | Switch pin for LED matrix scanning. |
| 7 | SW6 | passive | Switch pin for LED matrix scanning. |
| 8 | SW7 | passive | Switch pin for LED matrix scanning. |
| 9 | SW8 | passive | Switch pin for LED matrix scanning. |
| 10 | SW9 | passive | Switch pin for LED matrix scanning. |
| 11 | PGND | power_in | Power ground. |
| 12 | SW10 | passive | Switch pin for LED matrix scanning. |
| 13 | SW11 | passive | Switch pin for LED matrix scanning. |
| 14 | SW12 | passive | Switch pin for LED matrix scanning. |
| 15 | CS1 | output | Current source output for LED row 1. |
| 16 | CS2 | output | Current source output for LED row 2. |
| 17 | PVCC | power_in | Power supply for the current sources. |
| 18 | CS3 | output | Current source output for LED row 3. |
| 19 | CS4 | output | Current source output for LED row 4. |
| 20 | NC | unconnected | Not connected. |
| 21 | CS5 | output | Current source output for LED row 5. |
| 22 | CS6 | output | Current source output for LED row 6. |
| 23 | PVCC | power_in | Power supply for the current sources. |
| 24 | CS7 | output | Current source output for LED row 7. |
| 25 | CS8 | output | Current source output for LED row 8. |
| 26 | AGND | power_in | Analog ground. |
| 27 | DVCC | power_in | Power supply for the digital circuits. |
| 28 | AVCC | power_in | Power supply for the analog circuits. |
| 29 | NC | unconnected | Not connected. |
| 30 | RSET | passive | Input terminal for an external resistor that regulates the current source DC current value. |
| 31 | VIO | power_in | Input logic reference voltage. |
| 32 | SYNC | bidirectional | Synchronize pin used to synchronize more than one part, and it should be left floating if not used. |
| 33 | SDA | bidirectional | I2C compatible serial data. |
| 34 | SCL | input | I2C compatible serial clock. |
| 35 | ADDR1 | input | I2C address setting. |
| 36 | ADDR2 | input | I2C address setting. |
| 37 | INTB | output | Active-low interrupt output whose function is set by register F0h, and it can be left floating if the interrupt function is not used. |
| 38 | SDB | input | Shuts down the chip when pulled low. |
| 39 | IICRST | input | Resets the I2C interface when pulled high, and must be pulled down during normal operation. |
| 40 | GND | power_in | Connect to GND. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lumissil Microsystems |
| Package | QFN-40-EP(5x5) |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 5.5 | V | 7 | ||
| Supply voltage, VCC | VCC | -0.3 | 6 | V | 7 | ||
| Voltage at any input pin | -0.3 | V | upper limit VCC+0.3V | 7 | |||
| Maximum constant current of CS1~CS8 | IOUT | 39 | 42 | 45 | mA | RSET=20kΩ | 7 |
| Average current on each LED | ILED | 3.06 | 3.3 | 3.53 | mA | RSET=20kΩ, GCC=255, PWM=255 | 7 |
| Quiescent power supply current | ICC/IQ | 1.3 | 2 | mA | VSDB=VCC, all LEDs off | 7 | |
| Shutdown current | ISD | 2 | 5 | µA | VSDB=0V | 7 | |
| Current sink headroom voltage | VHR | 170 | 250 | mV | ISINK=336mA (Note 1, 2) | 7 | |
| Current source headroom voltage | 150 | 250 | mV | ISOURCE=42mA (Note 1) | 7 | ||
| Period of scanning | tSCAN | 128 | µs | 7 | |||
| Non-overlap blanking time during scan | tNOL | 8 | µs | SWy and CSx are all off during this time | 7 | ||
| Logic 0 input voltage | VHYS | 0.2 | V | VIO=3.6V | 7 | ||
| Logic 0 output voltage for SYNC | VOL | 0.4 | V | IOL = 8mA | 7 | ||
| Logic 0 input current | IIL | 5 | nA | VINPUT = 0V (Note 3) | 7 | ||
| Logic 1 input current | IIH | 5 | nA | VINPUT = VIO (Note 3) | 7 | ||
| Serial-clock frequency | fSCL | 400 | kHz | Fast Mode | 8 | ||
| Serial-clock frequency | fSCL | 1000 | kHz | Fast Mode Plus | 8 | ||
| Bus free time between a STOP and a START condition | tBUF | 1.3 | μs | Fast Mode | 8 | ||
| Bus free time between a STOP and a START condition | tBUF | 0.5 | μs | Fast Mode Plus | 8 | ||
| Hold time (repeated) START condition | tHD, STA | 0.6 | μs | Fast Mode | 8 | ||
| Hold time (repeated) START condition | tHD, STA | 0.26 | μs | Fast Mode Plus | 8 | ||
| Repeated START condition setup time | tSU, STA | 0.6 | μs | Fast Mode | 8 | ||
| Repeated START condition setup time | tSU, STA | 0.26 | μs | Fast Mode Plus | 8 | ||
| STOP condition setup time | tSU, STO | 0.6 | μs | Fast Mode | 8 | ||
| STOP condition setup time | tSU, STO | 0.26 | μs | Fast Mode Plus | 8 | ||
| Data setup time | tSU, DAT | 100 | ns | Fast Mode | 8 | ||
| Data setup time | tSU, DAT | 50 | ns | Fast Mode Plus | 8 | ||
| SCL clock low period | tLOW | 1.3 | μs | Fast Mode | 8 | ||
| SCL clock low period | tLOW | 0.5 | μs | Fast Mode Plus | 8 | ||
| SCL clock high period | tHIGH | 0.7 | μs | Fast Mode | 8 | ||
| SCL clock high period | tHIGH | 0.26 | μs | Fast Mode Plus | 8 | ||
| Rise time of both SDA and SCL signals | tR | 300 | ns | receiving, Fast Mode | 8 | ||
| Rise time of both SDA and SCL signals | tR | 120 | ns | receiving, Fast Mode Plus | 8 | ||
| Fall time of both SDA and SCL signals | tF | 300 | ns | receiving, Fast Mode | 8 | ||
| Fall time of both SDA and SCL signals | tF | 120 | ns | receiving, Fast Mode Plus | 8 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 7 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 7 | ||
| Operating temperature range | TA | -40 | 125 | °C | 7 | ||
| Thermal resistance, junction to ambient | θJA | 24.96 | °C/W | 7 | |||
| ESD (HBM) | -8 | 8 | kV | 7 | |||
| ESD (CDM) | -1 | 1 | kV | 7 |
CAD (KiCad official)
- Symbol:
IS31FL3736-QFLS4-TR - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
is31fl3736-qfls4-tr-etched.step/is31fl3736-qfls4-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is31fl3736-qfls4-tr.step/is31fl3736-qfls4-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lumissil Microsystems datasheet (30 pp, sha256
688275e2a2d3862c, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).