3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS31FL3726A-QFLS4-TR
ISSI(Integrated Silicon Solution) · LED Drivers · QFN-24(4x4)
IS31FL3726A-QFLS4-TR from ISSI(Integrated Silicon Solution), in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SERIAL-OUT | output | Output pin for the serial data input on the SERIAL-IN terminal, shifted out on the rising clock edge. |
| 2 | R-EXT | input | Connect an external resistor (to GND) to regulate the output current; IOUT = 15 × 1.26V / REXT. |
| 3 | VCC | power_in | Supply voltage pin, 3.0V to 5.5V. |
| 4 | GND | power_in | Ground pin for control logic. |
| 5 | SERIAL-IN | input | Serial data input for the data shift register. |
| 6 | CLOCK | input | Clock input for data shift on the rising edge, up to 30MHz. |
| 7 | LATCH | input | Data strobe input; data is not latched when low and is latched when pulled high (level triggered). |
| 8 | OUT0 | passive | Constant-current open-drain sink output 0, 5mA to 60mA set by REXT. |
| 9 | OUT1 | passive | Constant-current open-drain sink output 1, 5mA to 60mA set by REXT. |
| 10 | OUT2 | passive | Constant-current open-drain sink output 2, 5mA to 60mA set by REXT. |
| 11 | OUT3 | passive | Constant-current open-drain sink output 3, 5mA to 60mA set by REXT. |
| 12 | OUT4 | passive | Constant-current open-drain sink output 4, 5mA to 60mA set by REXT. |
| 13 | OUT5 | passive | Constant-current open-drain sink output 5, 5mA to 60mA set by REXT. |
| 14 | OUT6 | passive | Constant-current open-drain sink output 6, 5mA to 60mA set by REXT. |
| 15 | OUT7 | passive | Constant-current open-drain sink output 7, 5mA to 60mA set by REXT. |
| 16 | OUT8 | passive | Constant-current open-drain sink output 8, 5mA to 60mA set by REXT. |
| 17 | OUT9 | passive | Constant-current open-drain sink output 9, 5mA to 60mA set by REXT. |
| 18 | OUT10 | passive | Constant-current open-drain sink output 10, 5mA to 60mA set by REXT. |
| 19 | OUT11 | passive | Constant-current open-drain sink output 11, 5mA to 60mA set by REXT. |
| 20 | OUT12 | passive | Constant-current open-drain sink output 12, 5mA to 60mA set by REXT. |
| 21 | OUT13 | passive | Constant-current open-drain sink output 13, 5mA to 60mA set by REXT. |
| 22 | OUT14 | passive | Constant-current open-drain sink output 14, 5mA to 60mA set by REXT. |
| 23 | OUT15 | passive | Constant-current open-drain sink output 15, 5mA to 60mA set by REXT. |
| 24 | ENABLE | input | Output enable input; all sinks OUT0 to OUT15 are off when driven High and on when driven Low (internal pull-up 250k to 750kΩ). |
| 25 | Thermal Pad | power_in | Thermal pad; connect to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | QFN-24(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 5.5 | V | Normal operation | 8 | |
| Output current | IOUT | 23.9 | 25.2 | 26.5 | mA | VOUT=1V, VCC=3.3V, REXT=750Ω | 8 |
| Output current error between bits | △IMAT | -4 | 4 | % | VOUT=1V, VCC=3.3V, REXT=750Ω, IOUT=25.2mA | 8 | |
| Output current error between ICs | △IOUT | -2 | 2 | % | VOUT=1V, VCC=3.3V, REXT=750Ω, IOUT=25.2mA | 8 | |
| Headroom voltage | VHR | 0.4 | 0.5 | V | REXT=750Ω, IOUT=25.2mA | 8 | |
| Output leakage current | IOZ | 1 | µA | VOUT=5.5V | 8 | ||
| SERIAL-OUT low voltage | VOL | 0.4 | V | IOL=1.0mA, VCC=3.3V | 8 | ||
| SERIAL-OUT high voltage | VOH | 2.9 | V | IOH=-1.0mA, VCC=3.3V | 8 | ||
| SERIAL-OUT high voltage | VOH | 4.6 | V | IOH=-1.0mA, VCC=5V | 8 | ||
| Output current supply voltage regulation | %/VCC | 1 | % | VCC changed 3.3V to 5.5V, IOUT=25.2mA | 8 | ||
| Pull-up resistor ENABLE pin | R(UP) | 250 | 500 | 750 | kΩ | 8 | |
| Supply current, outputs off | IDD(OFF)1 | 0.3 | 0.6 | mA | VOUT=5V, REXT=OPEN | 8 | |
| Supply current, outputs off | IDD(OFF)2 | 2.1 | 2.5 | mA | VOUT=5V, all outputs off, REXT=0.75kΩ | 8 | |
| Supply current, outputs off | IDD(OFF)2 | 1 | 1.2 | mA | VOUT=5V, all outputs off, REXT=1.8kΩ | 8 | |
| Supply current, outputs on | IDD(ON)1 | 8.6 | 10 | mA | VOUT=0.7V, all outputs on, REXT=0.75kΩ | 8 | |
| Supply current, outputs on | IDD(ON)1 | 4.5 | 6 | mA | VOUT=0.7V, all outputs on, REXT=1.8kΩ | 8 | |
| Supply voltage | VCC | -0.3 | 6 | V | 7 | ||
| Voltage at any input pin | -0.3 | V | upper limit VCC+0.2V | 7 | |||
| Maximum junction temperature | TJMAX | 150 | °C | 7 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 7 | ||
| Operating temperature range | TA=TJ | -40 | 125 | °C | 7 | ||
| Maximum power dissipation | PDMAX | 3.44 | W | QFN | 7 | ||
| ESD (HBM) | -8 | 8 | kV | 7 | |||
| ESD (CDM) | -750 | 750 | V | 7 | |||
| Thermal resistance, junction to ambient | θJA | 29.1 | °C/W | QFN, 4-layer standard test PCB based on JESD 51-2A | 7 | ||
| Output (headroom) voltage | VOUT | 0.7 | 5 | V | 7 | ||
| Clock frequency | fCLK | 30 | MHz | Cascade connected | 7 | ||
| LATCH pulse width | twLAT | 20 | ns | 7 | |||
| CLOCK pulse width | twCLK | 20 | ns | 7 | |||
| ENABLE pulse width | twENA | 70 | ns | 7 | |||
| SERIAL-IN set-up time for CLOCK pin | tSETUP1 | 8 | ns | 7 | |||
| SERIAL-IN hold time for CLOCK pin | tHOLD1 | 8 | ns | 7 | |||
| Set-up time for LATCH pin | tSETUP2 | 8 | ns | 7 | |||
| Hold time for LATCH pin | tHOLD2 | 8 | ns | 7 | |||
| Propagation delay CLOCK - OUTn | tpLH1 | 30 | 50 | ns | LATCH=H, ENABLE=L | 9 | |
| Propagation delay LATCH - OUTn | tpLH2 | 30 | 50 | ns | ENABLE=L | 9 | |
| Propagation delay ENABLE - OUTn | tpLH3 | 50 | 70 | ns | LATCH=H | 9 | |
| Propagation delay CLOCK - SERIAL-OUT | tpLH | 20 | 40 | ns | 9 | ||
| Propagation delay CLOCK - OUTn | tpHL1 | 60 | 100 | ns | LATCH=H, ENABLE=L | 9 | |
| Propagation delay LATCH - OUTn | tpHL2 | 60 | 100 | ns | ENABLE=L | 9 | |
| Propagation delay ENABLE - OUTn | tpHL3 | 70 | 100 | ns | LATCH=H | 9 | |
| Output rise time | tor | 30 | 50 | ns | 10%~90% of voltage waveform | 9 | |
| Output fall time | tof | 52 | 80 | ns | 90%~10% of voltage waveform | 9 | |
| Maximum CLOCK rise time | tr | 500 | ns | When not on PCB | 9 | ||
| Maximum CLOCK fall time | tf | 500 | ns | When not on PCB | 9 |
CAD (KiCad official)
- Symbol:
IS31FL3726A-QFLS4-TR - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
is31fl3726a-qfls4-tr-etched.step/is31fl3726a-qfls4-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is31fl3726a-qfls4-tr.step/is31fl3726a-qfls4-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (20 pp, sha256
a8ccad6da9119c45, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).