Generated by kicad-footprint-generator · KiCad file format 20260206
IS25WP080D-JULA3-TR
ISSI(Integrated Silicon Solution) · NOR FLASH · USON-8-EP(2x3)
IS25WP080D-JULA3-TR from ISSI(Integrated Silicon Solution), in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: when high the device is deselected, outputs are high impedance and it enters low-power standby; when low the device is selected, and CE# must transition high to low after power-up before an instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI (data read on the falling edge of SCK), and bidirectional IO1 in Dual and Quad SPI and QPI modes. |
| 3 | WP# (IO2) | bidirectional | Write Protect protects the Status Register bits (SRWD, QE, BP3-BP0) when SRWD=1 and WP# is low; becomes IO2 and the WP# function is unavailable when QE=1. |
| 4 | GND | power_in | Ground reference for the device supply. |
| 5 | SI (IO0) | bidirectional | Serial Data Input for instructions, addresses and data on the rising edge of SCK in standard SPI, and bidirectional IO0 in Dual and Quad SPI and QPI modes. |
| 6 | SCK | input | Serial Data Clock providing synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# (P7=0, default) or RESET# (P7=1) when QE=0, both active low, and becomes IO3 when QE=1 so the HOLD#/RESET# function is unavailable. |
| 8 | Vcc | power_in | Device core power supply; 1.65V to 1.95V for IS25WP080D. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | USON-8-EP(2x3) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 96 | |||
| Input Voltage on All Pins | -0.5 | V | with respect to ground; upper limit VCC + 0.5V | 96 | |||
| Supply Voltage (absolute max) | VCC | -0.5 | 2.5 | V | IS25WP | 96 | |
| ESD Voltage (HBM) | -2000 | 2000 | V | Human Body Model, ANSI/ESDA/JEDEC JS-001 | 96 | ||
| Operating Temperature, Automotive Grade A3 | -40 | 125 | °C | Automotive Grade A3 | 96 | ||
| VCC Power Supply | VCC | 1.65 | 1.8 | 1.95 | V | IS25WP | 96 |
| VCC Active Read current | ICC1 | 4 | 12 | mA | NORD at 50MHz | 97 | |
| VCC Active Read current | ICC1 | 6 | 14 | mA | FRD Single at 133MHz | 97 | |
| VCC Active Read current | ICC1 | 8 | 15 | mA | FRD Dual at 133MHz | 97 | |
| VCC Active Read current | ICC1 | 10 | 17 | mA | FRD Quad at 133MHz | 97 | |
| VCC Active Read current | ICC1 | 9 | 16 | mA | FRD Quad at 104MHz | 97 | |
| VCC Program Current | ICC2 | 22 | 25 | mA | CE# = VCC, 85°C | 97 | |
| VCC Program Current | ICC2 | 25 | mA | CE# = VCC, 125°C | 97 | ||
| VCC WRSR Current | ICC3 | 22 | 25 | mA | CE# = VCC, 85°C | 97 | |
| VCC Erase Current (SER/BER32/BER64) | ICC4 | 22 | 25 | mA | CE# = VCC, 85°C | 97 | |
| VCC Erase Current (CE) | ICC5 | 22 | 25 | mA | CE# = VCC, 85°C | 97 | |
| VCC Standby Current CMOS | ISB1 | 8 | 15 | µA | CE# = VCC, VIN = GND or VCC, 85°C | 97 | |
| VCC Standby Current CMOS | ISB1 | 20 | µA | CE# = VCC, VIN = GND or VCC, 105°C | 97 | ||
| VCC Standby Current CMOS | ISB1 | 30 | µA | CE# = VCC, VIN = GND or VCC, 125°C | 97 | ||
| Deep power down current | ISB2 | 1 | 5 | µA | IS25WP, CE# = VCC, VIN = GND or VCC, 85°C | 97 | |
| Deep power down current | ISB2 | 10 | µA | IS25WP, CE# = VCC, VIN = GND or VCC, 105°C | 97 | ||
| Deep power down current | ISB2 | 15 | µA | IS25WP, CE# = VCC, VIN = GND or VCC, 125°C | 97 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = 0V to VCC | 97 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VIN = 0V to VCC | 97 | |
| Input Low Voltage (min) | VIL | -0.5 | V | max is 0.3VCC | 97 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100 µA | 97 | ||
| Input Capacitance (CE#, SCK) | CIN | 6 | pF | VIN = 0V, TA = 25°C, VCC=1.8V, 1MHz | 98 | ||
| Input/Output Capacitance (other pins) | CIN/OUT | 8 | pF | VIN/OUT = 0V, TA = 25°C, VCC=1.8V, 1MHz | 98 | ||
| Clock Frequency for fast read | fCT | 0 | 133 | MHz | SPI, Dual, Dual I/O, Quad I/O, and QPI | 99 | |
| Clock Frequency for fast read DTR | fCT | 0 | 66 | MHz | SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, and QPI DTR | 99 | |
| Clock Frequency for read (03h) | fC | 0 | 50 | MHz | 99 | ||
| CE# High Time | tCEH | 7 | ns | 99 | |||
| CE# Setup Time | tCS | 5 | ns | 99 | |||
| CE# Hold Time | tCH | 5 | ns | 99 | |||
| Data In Setup Time | tDS | 2 | ns | STR | 99 | ||
| Data In Hold Time | tDH | 2 | ns | STR | 99 | ||
| Output Valid | tV | 7 | ns | @ 133MHz (CL = 15pF) | 99 | ||
| Output Valid | tV | 8 | ns | @ 104MHz (CL = 30pF) | 99 | ||
| Output Hold Time | tOH | 2 | ns | 99 | |||
| Output Disable Time | tDIS | 8 | ns | 99 | |||
| Sector Erase Time (4Kbyte) | tEC | 70 | 300 | ms | 99 | ||
| Block Erase Time (32Kbyte) | tEC | 0.1 | 0.5 | s | 99 | ||
| Block Erase time (64Kbyte) | tEC | 0.15 | 1 | s | 99 | ||
| Chip Erase Time 8Mb | tEC | 2 | 6 | s | 8Mb | 99 | |
| Page Program Time | tPP | 0.2 | 0.8 | ms | 99 | ||
| Release deep power down | tRES1 | 5 | µs | IS25WP | 100 | ||
| Write Status Register time | tW | 2 | 15 | ms | 100 | ||
| Vcc(min) to CE# Low | tVCE | 300 | us | 104 | |||
| Write Inhibit Voltage | VWI | 1.4 | V | IS25WP | 104 | ||
| Byte Program | 8 | 40 | µs | 105 | |||
| Endurance | 100000 | Cycles | JEDEC Standard A117 | 105 | |||
| Data Retention | 20 | Years | JEDEC Standard A117 | 105 | |||
| Latch-Up | -100 | 100 | mA | JEDEC Standard 78 | 105 |
CAD (KiCad official)
- Symbol:
IS25WP080D-JULA3-TR - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
is25wp080d-jula3-tr-etched.step/is25wp080d-jula3-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25wp080d-jula3-tr.step/is25wp080d-jula3-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (113 pp, sha256
ef06a5ada10e0487, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).